Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Formulations
Food & Nutrition Formulations
Formulations
Cosmetics & Personal Care Formulations
Industries
Agriculture & Feed
Product Families
View All
Adhesives & Sealants
Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Food & Nutrition
Healthcare & Pharma
HI&I Care
Industrial
Paints & Coatings
Personal Care
Printing & Packaging
Sustainability
Cosmetic Ingredients
Sustainable Cosmetic Ingredients
Food Ingredients
Plastics & Packaging
Cleaning Ingredients
CASE Ingredients
Products
Agrochemicals
Applications
View All
Animal Feed & Nutrition
Base Chemicals & Intermediates
CASE Ingredients
Cleaning Ingredients
Composite Materials
Cosmetic Ingredients
Elastomers
Fluids & Lubricants
Food Ingredients
Industrial Additives & Materials
Pharmaceuticals & Nutraceuticals
Pigments & Colorants
Plastics
Ready-to-Use Products
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Masterbatches
Products in Masterbatches: Nucleating Agent
30 Products found in Masterbatches
Browse
Applications
Show All 2 Categories
Filters
Applications
Suppliers
Functions
Compatible Polymers & Resins
Carrier
Processing Methods
Products
Brands
Suppliers
Formulations
Documents
Relevance
Kafrit Group
CONSTAB NC 00611 LL
Functions:
Nucleating Agent
Compatible Polymers & Resins:
Polyethylenes (PE), High-Density Polyethylene (HDPE)
Processing Methods:
Blow Molding, Injection Molding
Carrier:
Resin-based, Polyethylenes (PE)
Features:
Good Tensile Properties, High Shrinkage, Excellent Stiffness, Good Barrier Properties
CONSTAB NC 00611 LL is a basic, strong nucleating agent that enhances stiffness in filled polymers. It serves as a nucleator for high-crystallinity PE applications and leads to improved shrinkage, tensile strength, and barrier properties in HDPE films.
Kafrit Group
KAFRIT FR 00U54 PS
Functions:
Flame Retardant, Synergist, Nucleating Agent
Carrier:
Resin-based, Polystyrenes (PS)
KAFRIT FR 00U54 PS is a monomeric brominated flame retardant masterbatch with a synergist and nucleation effect. It complies with DIN 4102 b1, b2, and EN 13501 e standards. This masterbatch is suitable for flame-retarding foamed PS (XPS). The carrier used is polystyrene (PS). It falls under the product families of additive masterbatches and flame retardants.
Kafrit Group
KAFRIT FR 00284 PS
Functions:
Flame Retardant, Synergist, Nucleating Agent
KAFRIT FR 00284 PS is a monomeric brominated flame retardant masterbatch with a synergist and nucleation effect. It also conforms to DIN 4102 b1, b2, and EN 13501 e standards and is designed for flame-retarding foamed ps (xps). This masterbatch belongs to the product families of additive masterbatches, flame retardants, and performance additives.
Kafrit Group
KAFRIT NC 02160 PP
Functions:
Clarifier, Nucleating Agent
Processing Methods:
Blow Molding, Injection Molding
Carrier:
Polypropylenes (PP), Resin-based
Features:
Fast Crystallization, Shorter Cycle Time
KAFRIT NC 02160 PP promotes faster PP crystallization, resulting in shorter cycle times and sink mark elimination. KAFRIT NC 02160 PP functions as a clarifier and nucleating agent, suitable for blow molding and injection molding of polypropylene (PP).
Kafrit Group
CONSTAB NC 00607 PP
Functions:
Nucleating Agent, Clarifier
Processing Methods:
Blow Molding, Injection Molding
Carrier:
Polypropylenes (PP), Resin-based
Features:
Good Mechanical Properties, Low Migration, Good Optical Properties
CONSTAB NC 00607 PP offers a clarifier product aimed at enhancing optical and mechanical properties. With extremely low migration, this clarifier doubles as a nucleating agent. It serves polypropylene (PP) and excels in blow molding and injection molding applications. It provides attributes like good optical properties, good mechanical properties, and low migration.
Kafrit Group
CONSTAB NC 00625 LD
Functions:
Foam Stabilizer, Nucleating Agent
Carrier:
Resin-based, Polyethylenes (PE)
CONSTAB NC 00625 LD is a product that functions as a nucleating agent and foam stabilizer. It uses polyethylene (PE) as its carrier and is used in the printing and packaging markets for foam applications. The product belongs to the additive masterbatches, performance additives, and processing aids product families.
AGC Chemicals Americas, Inc.
Fluon+™ High Flow FXM1-9494
Functions:
Foaming Agent, Nucleating Agent
Processing Methods:
Gas Assisted Injection Molding, Injection Molding
Carrier:
Resin-based, Fluorinated ethylene propylene (FEP)
Features:
Cost Effective, Light Weight, High Flow, Low Dielectric Constant
AGC Chemicals Americas, Inc. Fluon+™ High Flow FXM1-9494 Concentrate is a nucleating agent designed for use in the gas injection extrusion process. It contains a well-dispersed nucleating agent that acts as a site for foaming during the gas injection extrusion process. The concentrate is based on Chemours Teflon® FEP (Fluorinated ethylene propylene) and is supplied in cylindrical pellet form, approximately 0.125 inches long by 0.080 inches in diameter.
AGC Chemicals Americas, Inc.
Fluon+™ FP-F-FMX1
Functions:
Foaming Agent, Nucleating Agent
Processing Methods:
Gas Assisted Injection Molding, Injection Molding
Carrier:
Resin-based, Fluorinated ethylene propylene (FEP)
Features:
Cost Effective, Light Weight, Low Dielectric Constant
AGC Chemicals Americas, Inc. Fluon+™ FP-F-FMX1 Concentrate is a nucleating agent designed for use in the gas injection extrusion process. It contains a well-dispersed nucleating agent that acts as a site for foaming during the gas injection extrusion process. The concentrate is based on Chemours Teflon® FEP (Fluorinated ethylene propylene) and is supplied in cylindrical pellet form, approximately 0.125 inches long by 0.080 inches in diameter.
Addiplast Group
Addibatch® MBD 50622
Functions:
Clarifier, Nucleating Agent
Labeling Claims:
Food Contact Acceptable
Processing Methods:
Injection Molding
Carrier:
Polypropylenes (PP), Resin-based
Features:
Good Mechanical Properties, Food Contact Acceptable, Good Optical Properties
The MBD 50622 is a nucleating/clarifying masterbatch based on a homopolymer PP resin. This MB is used to improve the mechanical and optical properties in PP films and injected parts. For SDS, please contact Addiplast Group using the 'Request Document' button.
Plastron
PLASTRON NUC® C 4012 PS
Functions:
Nucleating Agent
Processing Methods:
Extrusion, Blown Film Extrusion, Film Extrusion
Carrier:
Resin-based, Polystyrenes (PS)
Plastron NUC® C 4012 PS is used for nucleation of PS foam, with CO2 blown.
Universal Colorant Company
Universal Colorant Company Clarifying/Nucleating Masterbatch
Functions:
Nucleating Agent
Processing Methods:
Injection Molding
Carrier:
Polypropylenes (PP), Thermoplastic Polyolefins (TPO), Low-Density Polyethylene (LDPE), Resin-based
Features:
Dimensional Stability, Nucleated, Shorter Cycle Time, Excellent Haze, High Optical Transparency
Universal Colorant Company Clarifying/Nucleating Masterbatch, also known as Clarifying masterbatch is important in plastic industry for lowering the haze and increasing the transparency of the injection molded items. These masterbatches are composed of superior quality of nucleating agents and specialty organic additives dispersed in polyolefin carrier resin. Effective in LDPE and PP polymers, this type of masterbatch creates large number of nucleation sites. These masterbatches remarkably lower down the cycle time of molding process along with increase the dimensional stability of the product.
Polyvel
Polyvel CN-L03
Functions:
Clarifier, Nucleating Agent
Processing Methods:
Blow Molding, Film Extrusion, Extrusion
Carrier:
Polylactic Acid (PLA), Resin-based
Features:
Matte Finish, Good Processability, Ease of Handling
CN-L03, PLA (polylactic acid) resin is a sustainable and compostable polymer that is ideal for applications warranting environmental consciousness and a path to sustainability. It is manufactured in a in a dry, easy-to-handle pellet for enhancing , PLA properties and processability.
Polyvel
Polyvel CN-P01
Functions:
Nucleating Agent
Compatible Polymers & Resins:
Polypropylenes (PP)
Processing Methods:
Extrusion, Blow Molding
Features:
Dimensional Stability, Dust-Free
CN-P01 increases throughput by decreasing the amount of time required for crystallization. This is accomplished by starting the crystallization process at a higher temperature.
Plastron
PLASTRON FOAM C 4113
Functions:
Nucleating Agent
Processing Methods:
Extrusion, Blown Film Extrusion, Film Extrusion
Carrier:
Resin-based, Polystyrenes (PS)
Plastron Foam C 4113 is used for nucleation for physical foamed PS sheets.
Poly Chem Alloy
Talc 4005
Functions:
Nucleating Agent
Processing Methods:
Foam Extrusion, Extrusion
Carrier:
Polypropylenes (PP), Resin-based, Polyethylenes (PE), Polystyrenes (PS)
Features:
Uniform Distribution
Talc 4005 are additive masterbatch concentrates designed for the nucleation of both commodity and engineering thermoplastic resins. Talc Nucleators typically contain 40 to 60 % by weight of talc in a PE, PP, or PS carrier. Other carriers, and other talc levels, such as 25%, are available upon request. About 80% of the talc particle size used in these products is less than 1 micron, with the remaining particle sizes ranging from 1 to 5 microns. Talc Nucleators are typically used as physical nucleating agents for extruded foam, and are generally used at a 0.4 to 2.0% let-down level, depending upon the application. These products are available in a uniform pellet shape, eliminating the processing concerns associated with dusts or powders.
Plastron
PLASTRON NUC® C 20 -N
Functions:
Nucleating Agent
Compatible Polymers & Resins:
Ethylene Propylene Diene Monomer (EPDM), Polyamides, Polycarbonates (PC), Polypropylenes (PP), High-Density Polyethylene (HDPE), Polyolefins, Acrylonitrile Butadiene Styrene (ABS), Polyethylenes (PE)
Processing Methods:
Injection Molding, Blow Molding
Chemical Family:
Carboxylic Acids & Derivatives
Features:
Shorter Cycle Time
Plastron NUC® C 20 -N is nucleating agent for the cycle time reduction of thermoplastic resins. Applicable in injection and blow molding processes as well. Convenient for LDPE, HDPE, PP, PA ABS, PS EPDM ABS/PC blends.
EnerPlastics
EnerPlastics EP CL 1413
Functions:
Nucleating Agent
Compatible Polymers & Resins:
Polyethylenes (PE), Polypropylenes (PP)
Processing Methods:
Blow Molding, Film Extrusion, Extrusion, Injection Molding
Carrier:
Resin-based, Polyethylenes (PE)
Features:
Low Warpage, Low Shrinkage
EnerPlastics EP CL 1413 will reduce warpage and shrinkage in moldings and increase transparency in PP and PE films.
Plastron
PLASTRON NUC® T-50
Functions:
Nucleating Agent
Compatible Polymers & Resins:
Polyethylenes (PE)
Carrier:
Low-Density Polyethylene (LDPE), Resin-based
Plastron NUC® T-50 is used as talc MB for the nucleation of PE foam in the direct gassing extrusion process.
Plastron
PLASTRON NUC® C 4012 PO
Functions:
Nucleating Agent
Compatible Polymers & Resins:
Polyolefins
Processing Methods:
Film Extrusion, Extrusion, Blown Film Extrusion
Carrier:
Polypropylenes (PP), Resin-based, Polyethylenes (PE)
Plastron NUC® C 4012 PO is used for nucleation of Polyolefin foam, with CO2 blown.
Plastron
PLASTRON NUC® C 20
Functions:
Nucleating Agent
Compatible Polymers & Resins:
Ethylene Propylene Diene Monomer (EPDM), Polyamides, Polycarbonates (PC), Polypropylenes (PP), High-Density Polyethylene (HDPE), Polyolefins, Acrylonitrile Butadiene Styrene (ABS), Polyethylenes (PE)
Processing Methods:
Injection Molding, Blow Molding
Chemical Family:
Carboxylic Acids & Derivatives
Features:
Shorter Cycle Time
Plastron NUC® C 20 is Nucleating agent for the cycle time reduction of thermoplastic resins. Applicable in injection and blow molding processes as well. Convenient for LDPE, HDPE, PP, PA ABS, PS EPDM ABS/PC blend, especially for transparent polymers.
Sri Vasavi Pigments
Sri Vasavi Pigments NUCLEATING AGENT MB 01(SV 91B001 NU)
Functions:
Nucleating Agent
Processing Methods:
Injection Molding
Carrier:
Polypropylenes (PP), Resin-based
Features:
High Gloss, High Clarity, Good Smoothness, Good Mechanical Properties, Excellent Transparency Properties, Fast Crystallization
Sri Vasavi Pigments NUCLEATING AGENT MB 01(SV 91B001 NU) is used for Films, PP Molded products like Disposable syringes, Containers, Buckets, Jugs, Bottles etc. and it having advantage of Increasing the transparency of the product.
Mayzo, Inc.
MPM® 2000
Functions:
Nucleating Agent
Processing Methods:
Injection Molding, Thermoforming, Rotational Molding, Blow Molding
Carrier:
Resin-based, Polypropylenes (PP)
When the MPM® 2000 is added to polypropylene at levels ranging from 0.25% – 2.0%, it can produce high levels of beta crystallinity in molded or extruded parts. The high beta crystal content results in dramatically higher impact strength and ductility, with very little reduction in modulus or tensile strength. If the final fabricated article is produced by post-orientation of an extruded sheet at temperatures below the melting point of the beta crystal phase, then microvoids will develop, and the density of the article will go down, and its opacity will go up. In the case of oriented films it is possible to lower the final film density by 15% when uniaxial stretching is done (MOPP), and by up to 70% when biaxial stretching (BOPP) is done. In the BOPP process it is possible to make breathable films when high levels of porosity are achieved. When the thermoforming process is used, the processing window of polypropylene is broadened dramatically, and cycle rates can be increased by 25%. Material distribution in the final part is also improved leading to potential down-weighting of thermoformed food containers by 15%. Beta nucleation can also be used to increase the tensile strength of biaxially oriented geogrids allowing for down-weighting of 15-20%. MPM 2000 can be used effectively in polypropylene resins that are already alpha-nucleated with either sodium benzoate or talc, and MPM 2000 may also work in the presence of other alpha nucleants, such as certain pigments. MPM 2000 is colorless, and has broad food contact approvals.
Sri Vasavi Pigments
Sri Vasavi Pigments NUCLEATING AGENT MB 02(SV 91B002 NU)
Functions:
Nucleating Agent
Processing Methods:
Injection Molding
Carrier:
Polypropylenes (PP), Resin-based
Features:
High Gloss, High Clarity, Good Smoothness, Good Mechanical Properties, Excellent Transparency Properties, Fast Crystallization
Sri Vasavi Pigments NUCLEATING AGENT MB 02(SV 91B002 NU) is used for Films, PP Molded products like Disposable syringes, Containers, Buckets, Jugs, Bottles etc. and it having advantage of Increasing the transparency of the product.
Poly Chem Alloy
Talc 3504M
Functions:
Nucleating Agent
Processing Methods:
Foam Extrusion, Extrusion
Carrier:
Polypropylenes (PP), Resin-based, Polyethylenes (PE), Polystyrenes (PS)
Features:
Uniform Distribution
Talc 3504M are additive masterbatch concentrates designed for the nucleation of both commodity and engineering thermoplastic resins. Talc Nucleators typically contain 40 to 60 % by weight of talc in a PE, PP, or PS carrier. Other carriers, and other talc levels, such as 25%, are available upon request. About 80% of the talc particle size used in these products is less than 1 micron, with the remaining particle sizes ranging from 1 to 5 microns. Talc Nucleators are typically used as physical nucleating agents for extruded foam, and are generally used at a 0.4 to 2.0% let-down level, depending upon the application. These products are available in a uniform pellet shape, eliminating the processing concerns associated with dusts or powders.
M.G. Polyblends
M.G. Polyblends Clarifier Masterbatch
Functions:
Nucleating Agent
Labeling Claims:
Food Contact Acceptable
Compatible Polymers & Resins:
Polypropylenes (PP), Low-Density Polyethylene (LDPE)
Processing Methods:
Injection Molding, Blow Molding
Carrier:
Thermoplastic Polyolefins (TPO), Polyolefins, Resin-based
M.G. Polyblends Clarifier Masterbatch consists of combination of nucleating agent and some specialty organic additives in polyolefin carrier resin. It reduces haze and increases the transparency of the injection molded items based on LDPE and PP polymers by creating large number of nucleation sites in the polymer. It also increases the dimensional stability of the product and shortening the cycle time during molding process.
Polyvel
Polyvel CN-E01
Functions:
Nucleating Agent
Compatible Polymers & Resins:
Polyethylenes (PE)
Carrier:
Low-Density Polyethylene (LDPE), Resin-based
Features:
Dimensional Stability, Dust-Free
CN-E01 is a specialized nucleating agent masterbatch intended for use in gas injection and chemical foaming applications to control the uniformity of gas cells, critical to making high quality foam with desired properties.
Plastron
PLASTRON NUC® NA 10
Functions:
Nucleating Agent
Compatible Polymers & Resins:
Polypropylenes (PP)
Processing Methods:
Blow Molding, Extrusion, Injection Molding
Carrier:
Polypropylenes (PP), Resin-based
Features:
Shorter Cycle Time
Plastron NUC® NA 10 is used as nucleating agent for extrusion, injection molding and blow molding of polypropylene.
Poly Chem Alloy
Talc 5004
Functions:
Nucleating Agent
Processing Methods:
Foam Extrusion, Extrusion
Carrier:
Polypropylenes (PP), Resin-based, Polyethylenes (PE), Polystyrenes (PS)
Features:
Uniform Distribution
Talc 5004 are additive masterbatch concentrates designed for the nucleation of both commodity and engineering thermoplastic resins. Talc Nucleators typically contain 40 to 60 % by weight of talc in a PE, PP, or PS carrier. Other carriers, and other talc levels, such as 25%, are available upon request. About 80% of the talc particle size used in these products is less than 1 micron, with the remaining particle sizes ranging from 1 to 5 microns. Talc Nucleators are typically used as physical nucleating agents for extruded foam, and are generally used at a 0.4 to 2.0% let-down level, depending upon the application. These products are available in a uniform pellet shape, eliminating the processing concerns associated with dusts or powders.
Viba Group
VIBATAN® PE MULTIFUNCTIONAL GREY G6771
Functions:
Nucleating Agent, Pigment
Pigment Type:
Inorganic Pigments
Color:
Grey
Labeling Claims:
Non-Toxic
VIBATAN® PE MULTIFUNCTIONAL GREY G6771 contributes to enhance processability during extrusion and the properties in the final product. Multifunctional GREY G6771 offers many advantages, such as a valid anti-collapse action, by avoiding the collapse of foam and reducing the quantity of used gas, as it can keep gas inside the foamed product. Its improved nucleating action will be displayed in the presence of a regular closed-cell foam structure, while the particular pigment in use improves heat exchange, thus considerably increasing the insulating effect. The final color of end products will be anthracite.
Polyvel
Polyvel CN-L01
Functions:
Nucleating Agent
Processing Methods:
Foam Extrusion, Extrusion
Carrier:
Polylactic Acid (PLA), Resin-based
Features:
Matte Finish, Good Processability, Ease of Handling
CN-L01, PLA (polylactic acid) resin is a sustainable and compostable polymer that is ideal for applications warranting environmental consciousness and a path to sustainability. It is manufactured in a in a dry, easy-to-handle pellet for enhancing , PLA properties and processability.