Products in Masterbatches: Processing Aid

ELASTOSIL® AUX FL Non-Healing is a ready-to-use masterbatch comprising specific additives and reactive silicone polymers that are commonly used in ELASTOSIL® liquid silicone rubber. This ensures homogeneous covulcanization without migration, as may be observed for systems based on silicone oil. It can be used to reduce self-healing and other sticking phenomena.

GENIOPLAST® PP 20A08 is a pelletized formulation consisting of 20% functional silicone dispersed in polypropylene. It has been specifically developed as a compounding additive for unfilled and filled thermoplastic polyolefin compounds. This product is odorless. When used within the recommended levels (0.5 - 2%), GENIOPLAST® PP 20A08 does not have a negative impact on the thermo-mechanical properties of the compounds it is added to. Additionally, due to its specific effect, the processing temperature of the polyolefin compound can be slightly lowered.

CONSTAB PA 00852 PPR is a processing aid product that improves processability, reduces fusion torque, and provides better gage control. It is used in extrusion processes with polypropylene (PP) as its carrier. This product also offers high-temperature resistance and a higher gloss.

KAFRIT PA 0I970 LL is a polyolefin extrusion improver that enhances film clarity, gloss, and surface appearance. It reduces melt fracture, die pressure, power consumption, and processing temperature. This product is particularly suitable for industrial and transport packaging, as well as food and beverage packaging applications.

CONSTAB PA 00852 PP is good for improved processibility, torque reduction, and gauge control. Reduces die buildup and extruder pressure, especially at very high melt temperatures up to 310 °C. Processing aids prevent die buildup and give a smoother, more glossy surface. high-temperature resistant polymer processing aid; improved melt flow; less desposites in the melt system and die capilaries; improved gloss.

CONSTAB MA 00930 PP is a processing aid product that uses polypropylene (PP) as its carrier. CONSTAB MA 00930 PP features high shrinkage, good stiffness, good barrier properties, and low haze. This product consists of 60% hydrogenated C5 resin in homopolymer.

CONSTAB PA 00809 LD is meticulously crafted to address key challenges in plastic extrusion, including the elimination of melt fracture, reduction of die build-up, and extruder pressure. This processing aid is optimized for applications involving blown film below 235°C and cast films. The formulation is compatible with a carrier of polyethylene (PE) grounded in a resin-based matrix. A defining attribute is its ability to effectively mitigate low-melt fracture.

KAFRIT PA 07720 LL is a product used to prevent melt fracture during the extrusion of mll and ll PE-based films. It serves as a general-purpose processing aid, enhancing the extrusion of polyolefins. This product is compatible with metallocene linear low-density polyethylene (MLLDPE) and linear low-density polyethylene (LLDPE) polymers and resins. It is designed for use in extrusion processing and is carried by resin-based polyethylene (PE). One of its key features is its ability to effectively reduce instances of low-melt fracture.

CONSTAB CB 09059 LD is composed of 10% synthetic silica and functions as both a long-term antistatic agent and processing aid. It is suitable for polyethylene (PE) and resin-based materials and serves the printing and packaging markets, especially in applications like food and beverage packaging and industrial and transport packaging.

CONSTAB PA 00833 LD is a processing aid that prevents die build-up and gives a smoother, more glossy surface. Eliminates melt fracture; reduces die build-up and extruder pressure; suitable up to 280°C processing temperatures. Reduces die buildup and extruder pressure and improves surface quality.

CONSTAB PA 00856 LD is meticulously engineered to eliminate melt fracture and mitigate issues like die build-up, gel formulation, and extruder pressure. Its efficacy is particularly prominent when working with metallocene. It boasts a 3% content of second-generation PPPA, functioning as an indispensable processing aid. It's compatible with a carrier of polyethylene (PE), which is resin-based. A notable feature is its remarkable ability to mitigate melt fracture, effectively enhancing the extrusion process.

CONSTAB CB 09060 LL offers a product comprised of 10% synthetic silica, 5% erucamide slip additive, and processing aid. This versatile formulation serves as both a processing aid and a slip agent, addressing packaging needs in food and beverage packaging and industrial and transport packaging.

KAFRIT PA 0K060 PP is specifically formulated to mitigate die build-up and enhance processing in cast polypropylene (PP). Functioning as a high-temperature processing aid, it offers notable advantages for both blow molding and injection molding procedures. This product belongs to the additive masterbatches and processing aids product families.

KAFRIT PA 00S08 LD is a combination of a processing aid and an antioxidant, suitable for use in applications with high processing or melt temperatures. It effectively reduces die buildup and gel formation in cast films and pipes, contributing to smoother and more efficient processing.

CONSTAB PA 00833 PPR is a processing aid product that uses polypropylene (PP) as its carrier. It features high-temperature resistance, low die deposit, reduced fusion torque, and a higher gloss. This product is suitable for improving gloss and reducing die buildup.

KAFRIT PA 00S08 LL PA & AO is a product that offers a combination of reduced die build-up, prevention of gel formation, and an improved antioxidant (AO) package. It serves as an antioxidant and processing aid, finding applications in food and beverage packaging and industrial and transport packaging within the printing and packaging market.

CONSTAB CON-X® PA 810 PE is a product that functions as a processing aid. It is labelled as recyclable and sustainable and uses polyethylene (PE) as its carrier. The features include flexibility, freeze resistance, higher gloss, recyclability, clarity, low die deposit, tear resistance, and excellent seal properties.

KAFRIT PA 0H670 LL is a processing aid MB that improves the extrusion of polyolefins, particularly at high temperatures, by reducing buildup and melt fracture. It is designed for cast films and high-temperature applications, making it ideal for use in agriculture films, including greenhouse and tunnel films.

CONSTAB PA 00833 PP is a processing aid product, but with a different carrier, polypropylenes (PP). It reduces die buildup and extruder pressure while improving surface quality. It is used in the printing and packaging market for food and beverage packaging and industrial and transport packaging applications.

CONSTAB MA 00929 PP is a processing aid product that uses polypropylene (PP) as its carrier. CONSTAB MA 00929 PP features high shrinkage, good stiffness, good barrier properties, and low haze. This product consists of 60% hydrogenated c9 resin in homopolymer.

Polyfil Inc’s PAC-0001FFLL-SP is a fluoropolymer-free processing aid concentrate for polyethylene extrusion that offers outstanding performance under a wide variety of extruder conditions. The non-blooming, thermally stable active ingredient can speedily coat internal die surfaces without buildup at low dosage levels. Benefits of PAC-0001FFLL-SP quality include reduction or elimination of melt fracture. Improvements are seen in the gloss, clarity, and physical properties of the film. Economic advantages are obtained through increased extruder output and lower scrap rates. PAC-0001FFLL-SP complies with FDA and EU requirements for food contact applications and will not interfere with ink adhesion, heat seals, or laminations.

Polyfil Inc’s PAC-0005FFLL-MWZ is an economical, fluoropolymer free processing aid concentrate for polyethylene extrusion that offers outstanding performance under a wide variety of extruder conditions. The non-blooming, thermally stable active ingredient can speedily coat internal die surfaces without build-up at moderate dosage levels. Benefits to PAC-0005FFLL-MWZ quality include reduction or elimination of melt fracture, die build-up, and gel formation. Improvements are seen in gloss, clarity, and physical properties of the film. Economic advantages are obtained through increased extruder output and lower scrap rates. PAC-0005FFLL-MWZ complies with FDA requirements for food contact applications and will not interfere with ink adhesion, heat seals, or laminations. The MWZ grade has a proprietary chemistry that is thermally stable at even higher temperatures than the MW, making the MWZ suitable for both blown and cast film applications.

Polyfil Inc’s PAC-0005FFLL-MW is an economical, fluoropolymer free processing aid concentrate for polyethylene extrusion that offers outstanding performance under a wide variety of extruder conditions. The non-blooming, thermally stable active ingredient can speedily coat internal die surfaces without build-up at moderate dosage levels. Benefits to PAC-0005FFLL-MW quality include reduction or elimination of melt fracture, die build-up, and gel formation. Improvements are seen in gloss, clarity, and physical properties of the film. Economic advantages are obtained through increased extruder output and lower scrap rates. PAC-0005FFLL-MW complies with FDA requirements for food contact applications and will not interfere with ink adhesion, heat seals, or laminations. The MW grade has a proprietary chemistry that provides excellent thermal stability for blown film applications.

MBD 40227 is a masterbatch filled with 2.5% fluorated processing aid on a LLDPE support. For SDS, please contact Addiplast Group using the 'Request Document' button.

Rainmaker Polymers ACLLPA03NA1 is 3% Processing Aid PEC. Processing aids help improve manufacturing thru-put and reduce surface imperfections in polyethylene films. The active processing aid component has an affinity for the metal surfaces and will migrate from the polymer to the extruder barrel and die surfaces. Once at these surfaces, a fine coating is formed that reduces the coefficient of friction between the metal and polymer. The ultimate effect is an improvment in production rates and a reduction in drag induced imperfections such as melt fracture.

Rainmaker Polymers ACLLPA02NA2 is 2% Processing Aid PEC. Processing aids help improve manufacturing thru-put and reduce surface imperfections in polyethylene films. The active processing aid component has an affinity for the metal surfaces and will migrate from the polymer to the extruder barrel and die surfaces. Once at these surfaces, a fine coating is formed that reduces the coefficient of friction between the metal and polymer. The ultimate effect is an improvement in production rates and a reduction in drag induced imperfections such as melt fracture.

The MBD 40161 is a masterbatch containing 5% fluorinated copolymer based on LDPE resin. For SDS, please contact Addiplast Group using the 'Request Document' button.

Rainmaker Polymers ACLLPA03NA3 is 3% Processing Aid PEC. Processing aids help improve manufacturing thru-put and reduce surface imperfections in polyethylene films. The active processing aid component has an affinity for the metal surfaces and will migrate from the polymer to the extruder barrel and die surfaces. Once at these surfaces, a fine coating is formed that reduces the coefficient of friction between the metal and polymer. The ultimate effect is an improvement in production rates and a reduction in drag induced imperfections such as melt fracture.

Masterbatch PRZ PA708 is a process aid masterbatch designed to improve the melt processing of host polymers. They may also improve esthetic properties of finished articles by removing flow marks and die lines.

NOVIS P-490 is an Isotactic low molecular weight polypropylene with enhanced flow properties. Melting point and most of its mechanical properties are similar to conventional PP. It is its low molecular weight and narrow molecular weight distribution which impart NOVIS P-490 high melt flow rate.

Polylink Polymers P-91010 PA is manufactured by compounding linear low density polyethylene with additives like antioxidant & special processing aids to improve the process ability.

Starbetter Chemical Materials Siloxane Masterbatch Base on PE ST-LS301 is made from high molecular weight polysiloxane uniformly dispersed in polyolefin resin. It can be blended evenly with other materials in production, easier processing. It is used as processing aids and surface modifier for thermoplastics, to improve the flowability in processing and surface properties of products, improve smoothness and surface glossiness, reduce coefficient of friction, and improve the touch feelings.

CP-L01, PLA (polylactic acid) resin is a sustainable and compostable polymer that is ideal for applications warranting environmental consciousness and a path to sustainability. It is manufactured in a in a dry, easy-to-handle pellet for enhancing , PLA properties and processability.

CM-S01 silicone processing aid and mold release masterbatches are comprised of polydimethylsilicone* fluid dispersed in polyethylene, polypropylene, nylon, high impact polystyrene resin, acetal copolymers and others.

CM-N02 silicone processing aid and mold release masterbatches are comprised of polydimethylsilicone* fluid dispersed in polyethylene, polypropylene, nylon, high impact polystyrene resin, acetal copolymers and others.