Products in Catalysts, Initiators & Crosslinkers: Resin Transfer Mol...

PEROXAN BP-Pulver 50 W is Dibenzoylperoxide 50%, Powder in dicyclohexyl phthalate.PEROXAN BP-Pulver 50 W is used for the curing of unsaturated polyester resins and acrylic resins at ambient and elevated temperatures.

Metox BW90 is a liquid peroxide initiator based on peroxides methyl ethyl ketone in an Ōalan plasticizer. Compared with the standard MEKP, it contains reduced content of hydrogen peroxide and water, and increased content of MEKP dimer.

Metox 50W is peroxide copolymerization initiator for unsaturated polyester resins. They are mainly used with cobalt accelerators to curing at ambient temperature. They are suitable for manual and spray lamination. They can be used, for example, for the production of polymer concrete. Compared to the hardener Metox-50 show a slightly extended gelation time. Due to the reduced water content Metox-50W is recommended for curing gel coats, some polyester varnishes and others.

PEROXAN BP-40 LS is Dibenzoylperoxide 40%, Suspension with plasticizer.PEROXAN BP-40 LS is used for the curing of unsaturated polyester resins at ambient temperature in combination with amine accelerators.

PEROXAN A-50 M is Mixture of Acetylacetone peroxide and tert-Butyl hydroperoxide Solution in diacetone alcohol.PEROXAN A-50 M is used for the curing of unsaturated polyester resins at ambient temperature in combination with cobalt accelerators.

PEROXAN BP-Pulver 50 W + is Dibenzoylperoxide 50%, Powder in dicyclohexyl phthalate.PEROXAN BP-Pulver 50 W+ is used for the curing of unsaturated polyester resins and acrylic resins at ambient and elevated temperatures.

Metox 30 is peroxide initiator for copolymerization of unsaturated resins polyester. They are mainly used with cobalt accelerators at temperature surroundings. They are suitable for manual and spray lamination. Due to the lowered water content is recommended for hardening gel coats, polymer concrete, some polyester varnishes and others. These initiators show an extended gelation time compared to Metox-50.

PERGAQUICK C100 is Cobaltoctoate 10%, Liquid.PERGAQUICK C100 is used as an accelerator for curing of unsaturated polyester resins at ambient temperature in combination with Ketone peroxides

PEROXAN A-40 L is Acetylacetone peroxide Solution in diacetone alcohol.PEROXAN A-40 L is used for the curing of unsaturated polyester resins at ambient temperature in combination with cobalt accelerators.

Metox BW80 is a liquid peroxide initiator based on peroxides methyl ethyl ketone in an Ōalan plasticizer. Compared with the standard MEKP, it contains reduced content of hydrogen peroxide and water, and increased content of MEKP dimer. It states diluted form of the Metox-BW85 initiator.

Metox BW85 is a liquid peroxide initiator based on peroxides methyl ethyl ketone in an Ōalan plasticizer. Compared with the standard MEKP, it contains reduced content of hydrogen peroxide and water, and increased content of MEKP dimer.

PEROXAN ME-60 LX is Methyl ethyl ketone peroxide Solution in TXIB.PEROXAN ME-60 LX is used for the curing of unsaturated polyester at ambient temperature in combination with cobalt accelerators.

PEROXAN ME-30 LX is Methyl ethyl ketone peroxide Solution in TXIB.PEROXAN ME-30 LX is a general purpose MEKP used for the curing of unsaturated polyester at ambient temperature in combination with cobalt accelerators.

PERGAQUICK A300 is N,N-Diethylaniline 99%, Liquid.PERGAQUICK A300 is used as an accelerator for curing of unsaturated polyester resins at ambient temperature in combination with Dibenzoyl peroxide (PEROXAN BP-types).

PEROXAN ME-50 LX is Methyl ethyl ketone peroxide Solution in TXIB.PEROXAN ME-50 LX is a general purpose MEKP used for the curing of unsaturated polyester at ambient temperature in combination with cobalt accelerators.

Metox VLHP90 is a liquid peroxide initiator based on peroxides methyl ethyl ketone in an Ōalan plasticizer. Compared with the standard MEKP, the initiator contains a reduced content of hydrogen peroxide, water and methyl ethyl ketone. May be used for curing unsaturated polyester resins (UPR), gelcoats, in the presence of cobalt accelerator. Especially recommended for curing gel coats due to very low content of hydrogen peroxide, water and methyl ethyl ketone. This high purity initiator can be used wherever the use of Permix-MC96 is demonstrated too fast gelling. Compared to Metox-BW85, it has a shorter gel and hardening time.

PEROXAN ME-50 LA3 X is Methyl ethyl ketone peroxide Solution in TXIB.PEROXAN ME-50 LA3 X is used for the curing of unsaturated polyester and vinylester resins at ambient temperature in combination with cobalt accelerators.

Pentox 40 is peroxide initiator for copolymerization of unsaturated resins polyester. They are mainly used with cobalt accelerators at temperature surroundings. These initiators are particularly suitable in those applications where it is required fast molding with transfer of the core, for example cold forming or in injection molding techniques. Compared to the Metox-50 hardener, they contain a lower amount of active oxygen. However, they show a similar one gel time and a greater exothermic effect, therefore, they are not recommended for use in production too thick layers in one operation, as well as for hardening gel coats.

PEROXAN ME-50 LS-PX is Methyl ethyl ketone peroxide Solution in TXIB.PEROXAN ME-50 LS-PX is used for the curing of unsaturated polyester at ambient temperature in combination with cobalt accelerators.

PEROXAN PK295 S1-V is Mixture of 1,1-Di-(tert-butylperoxy)-3,3,5-trimethylcyclohexane and tert-Butyl peroxy-2-ethylhexanoate Solution in odorless white spirits.PEROXAN PK295 S1-V is used for the curing of unsaturated polyester resins.

PEROXAN BP-Pulver 50 SE is Dibenzoylperoxide 50%, Powder with gypsum.PEROXAN BP-Pulver 50 SE is used for the curing of unsaturated polyester resins at ambient and elevated temperatures.

PERGAQUICK A3 S is N,N-Diethylaniline 10%, Solution in styrene.PERGAQUICK A3 S is used as an accelerator for curing of unsaturated polyester resins at ambient temperature in combination with Dibenzoyl peroxide (PEROXAN BP-types).

Metox 50S is peroxide initiator for copolymerization of unsaturated resins polyester. They are mainly used with cobalt accelerators at temperature surroundings. They are suitable for manual and spray lamination. In relation to the hardener Metox-50 shows a shorter gelation time.

PERGAQUICK A100 is N,N-Dimethyl-p-toluidine 98.5%, Liquid.PERGAQUICK A100 is used as an accelerator for curing of unsaturated polyester and PMMA resins at ambient temperature in combination with Dibenzoyl peroxide (PEROXAN BP-types).

PEROXAN PB-50 A is Mixture of tert-Butyl peroxybenzoate and Acetylacetone peroxide Solution in diacetone alcohol.PEROXAN PB-50 A is used for the curing of unsaturated polyester resins.

PEROXAN M64 A1X is Methyl ethyl ketone peroxide and Acetyl acetone peroxide Solution in TXIB.PEROXAN M64 A1 X is used for the curing of unsaturated polyester at ambient temperature in combination with cobalt accelerators.

PERGAQUICK A200 is N,N-Dimethylaniline 99%, Liquid.PERGAQUICK A200 is used as an accelerator for curing of unsaturated polyester resins at ambient temperature in combination with Dibenzoyl peroxide (PEROXAN BP-types).

Metox 50 is peroxide initiator for copolymerization of unsaturated resins polyester. They are mainly used with cobalt accelerators at temperature surroundings. They are suitable for manual and spray lamination. Due to the lowered water content Metox-50 is recommended for hardening polymer concrete and some concrete polyester varnishes and others.