Products in Polymer Additives: Pipes

Varteco Quimica Puntana KALFLEX-PP is a Propyleneglycol Polyadipate High resilience to the extraction of PVC compounds through oils, hydrocarbons and soapy water, etc. is the main feature of polymeric plasticizers. The low volatility promotes less plasticizer loss during the process, higher stability of the mechanic properties of the compound (very slow aging and fog elimination in automobiles) and less odor of the end product. Low migration is another advantage of polimeric plasticizers. As a result, they can be used in compounds in contact with adhesives, rubbers, polystyrenes, etc.

LOMON® LR-108 pigment is an alumina treated rutile titanium dioxide pigment made by the sulfate process. It is specially designed for masterbatch and compounding applications. LOMON® LR-108 pigment disperses easily in polyolefins, with minimal effect on melt flow index, so that even masterbatch with high TiO2 concentration can produce film with high opacity and whiteness. LOMON® LR-108 pigment is recommended for plastics applications that require high thermal stability. It is designed with a hydrophobic surface that acts as a barrier to help prevent the pigment from absorbing moisture from the air.

Bifix PE 491-42 is a master with 40% soot SRF type and mineral anti-block for use in injection molding, and in the manufacture of thicker foils and pipes.

GREENSTAB® 4660(P) is used by PVC Pipe Manufacturers,PVC Accessories Manufacturers,PVC Cable Manufacturers.

Graphite Engineered Solutions WonderFill is a highly graphitized (>99.999% Carbon) powder form of irregularly shaped particulates. The particles are composed of discontinuous segments of resin infused carbon fiber bundles. Each particle is composed of approximately half fiber and the other half carbonized resin. The aspect ratio of these particles varies from 1:1 to over 500:1. The range of WonderFill grades provide powders that vary from fairly coarse grades (high aspect ratio) to ultrafine grades (low aspect ratio).

Saudi Carbonate SC PCC 80C – YB Is a surface coated PCC used in uPVC Pipes Applications. Its ease of flow and dispersion characteristics due to controlled viscosity allow smoother operation of extrusion, higher loading and more output with better impact strength, good elongation at break, surface finish and less wear & tear on extruder.

Goldstab CZ 5216 ND are performance-oriented and particularly provide excellent long-term retention of color, outstanding mechanical properties and a high level of the weathering resistance. It has a Good heat stability and gloss. It is a Non-dusting stabilizer provides excellent lubrication along with heat stability.

POLYB® AM-920 is an additives which are used as a compatibilizers with an inorganic material or other resin in the field of the compound or improve the adhesion with other substrates.

Shandong Donglin New Materials MBS impact modifier DL-521S is a terpolymer prepared by emulsion polymerization of methyl methacrylate, butadiene and styrene. Due to its typical core-shell structure, it will not affect the transparency of the product and improve the impact strength; These products are mainly used to produce PVC indoor products, such as PVC pipes, card base materials, PVC transparent films and sheets, etc.

GREATBAY XZ-6500 is a bromine flame retardant.

UV-326 is widely used for photosensitive materials,coating, PVC,PS,PC, PMMA,PE,ABS resin,epoxy resin and so on.

Blend Colors Conductive HDPE/3 is a black masterbatches for key markets such as agricultural, packaging, electronics, textiles and nonwovens, wire & cable, automotive and construction. And our R&D team makes consistent and continuous efforts to give steady products and also invent new formulations as per customer needs.

DHR-100 Titanium dioxide anatase is white powder, non-toxic, not soluble in water, it belongs to anastase type. It is also good in white pigments. Anatase titaium dioxide usually used on plastics, paint and coating, used on indoor product.

Astra Polymers Black-MB/P-Type is used under automotive, consumers, packaging, electrical, appliances, construction, agriculture.

REPIN Masterbatches Intense Black N 28-3332 is used in Injection / Blowing Molding applications. We manufacture Black Masterbatches in the standard range based on all types of polymers used in the Plastics Industry including PE, PS, EVA and universal polymers. Our products range from carbon blacks that provide high jetness, UV protection and food contact approval to more economical blacks that impart just color.

OKABEST® additives give the chance into new applications for your thermoplastics. Newly developed OKABEST® additives are already stabilizing numerous parts, staying functional at very high temperatures or resisting hot motor oil. OKABEST® PAT 550 is an endurance stabilization for GF-PP.

Paychlor S-68 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

AIPLUS PP is a new flame retardant masterbatch for PP, with higher performance than the traditional flame retardants of the same UL 94 V2 class.

POLYB® PA-490 is an additive added to attain improvement for processing of polyolefin resin at very low levels usage(100~100ppm). It is a white powder made of modified fluoro-elastomer. polymer processing aid is coated at the inside of the die wall and decreases the friction between melted resin and the die wall.

Haicheng Jinghua Mineral Products JH-2000A is our new developed composite flame retardant for direct substitute of antimony trioxide in PVC application, JH-2000A is suitable for use in all kinds of PVC, especially flexible PVC, and in PVC application, there are a number of attractive performance attributes and features as listed below.

Nitto Kasei TVS 8105 is Most stabilizers are approved by the Food and Drug Administration (FDA) of the USA and registered at the Japan Hygienic PVC Association (JPHA), featuring high levels of safety-mainly used for food packaging materials or PVC pipes and joints.

Universal Colorant Company PVC Forming Masterbatch is the best filler for use in food grade and medical grade plastic industry. All these types of masterbatches are offered in different varieties of sizes, colors and shades. PVC masterbatches is best known for its quick dispersibility, lower dosage, migration resistance, weather resistance and non- blooming properties. These are suitable to use in rigid and foam PVC products including cables and profiles.

Wuhan Qian jiang Fangyuan FR-761 rutile grade plastic master batch purpose titanium dioxide is an excellent general-purpose grade rutile type titanium dioxide produced by “Fangyuan Titanium Dioxide” with sulfuric acid process. FR-761 rutile grade plastic master batch purpose titanium dioxide integrates the innovation studies on inorganic coating, organic treatment, salt treatment, calcinations control, hydrolysis and product application etc. and also adopts advanced control of color hue and particle size and is subjected to inorganic and organic surface treatment with zirconium and aluminum, which makes the product own excellent application performance.

Cotiox KA-300 is a titanium dioxide anatase type fiber grade removing textile gloss and improving textile durability Prominent dispersibility and regular particle sizes without assemblers.

Synergist 90 is powdered polyol/synergists for our Enflame series flame retardants. It promote the char formation and blowing auxiliary for the film formation to make the flame retardants more effective. It also aid in maintaining the properties involved in the process.

PERGASLOW HD-100 is Hydrochinone 98%, Solid.PERGASLOW HD-100 is used as an inhibitor for increasing pot life of SMC and BMC.

PEROXAN PPV is tert-Butyl peroxypivalate 75%, Solution in odorless white spirits.PEROXAN PPV is used for the (co)polymerization of ethylene, vinylchloride, vinylidenechloride, acrylates and methacrylates.

GREENSTAB® 4440(P) is used by PVC Pipe Manufacturers,PVC Accessories Manufacturers,PVC Cable Manufacturers.

Liwang Chemical Nantong LP-9011 fluorescent red is a good heat resistance, maximum temperature up to 300 degrees, no formaldehyde, does not contain any heavy metals in the environment-friendly fluorescent pigments. Applicable to the processing temperature higher than 200 degrees of masterbatch and injection type of all kinds of plastic products.

We manufacture REPIN Masterbatches Black Premium 28-3067 in the standard range based on all types of polymers used in the Plastics Industry including PE, PS, EVA and universal polymers. Our products range from carbon blacks that provide high jetness, UV protection and food contact approval to more economical blacks that impart just color.

Vatan Plastik San. Tic. AS Dioctyl Adipate (DOA) is a plasticizer with superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

Liwang Chemical Nantong LP-9004 fluorescent orange is a good heat resistance, maximum temperature up to 300 degrees, no formaldehyde, does not contain any heavy metals in the environment-friendly fluorescent pigments. Applicable to the processing temperature higher than 200 degrees of masterbatch and injection type of all kinds of plastic products.

KE-8050 is a Antiblocking effect. It is used in General purpose , Film down to 30μm ,Extrusion and molding, PS thermoforming.