Products in Polymer Additives: Foaming Agent

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Cel-Span® CFA 840 is a 40% active endothermic foaming agent concentrate, suitable for a variety of olefin resins such as polyethylene and polypropylene. Cel-Span® CFA 840 is recommended for extrusion, injection, and structural foam molding of polyolefins.

BTec™ BSI-8100-VP is an exothermic CFA’s generate heat during the decomposition process, yield more volume of gas and higher gas pressure.

BTec™ BSI-7100-VFL is an endothermic and exothermic CFA Blends deliver a collaboration effect that provides attributes that each cannot supply by independently- the best of both chemistries.

Cel-Span® CFA 800 is an endothermic foaming agent concentrate recommended for injection molding & extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrenics, MPPO and ABS. Cel-Span® CFA 800 is recommended for extrusion, and structural foam molding of polyolefins, polystyrene, MPPO and ABS. This product exhibits a very fine cell structure compared to a typical endothermic foaming agent in extrusion applications. This product has been engineered to eliminate splay and to exhibit good surface esthetics for solid injection foam parts.

Ficel® AZ 4 is used as Flexible PVC, Polyolefin/Plastisol/Rubber.

Poly Chem Alloy PolyFoam 4004CF are additive masterbatch concentrates containing highly specialized chemical blowing agents. This product was specifically created for the production of microcellular foam structures in a variety of thermoplastic materials. PolyFoam products are available containing endothermic blowing agents, exothermic blowing agents, and as a combination of both.

Foamazol™ 62 is intended for sink mark removal and warp reduction in injection molding applications.

Foamazol™ 95 is intended for applications in polystyrene or polystyrene-type materials. It can be used in injection molding and extrusion processes to produce very fine celled foams.

Arbor Plastic Technologies LLC Foaming Agent reduces weight and heat-related defects such as sink marks.

BTec™ BSI-9100-AP is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.

Cel-Span® CFA 899PS is a 20% active endothermic foaming agent concentrate recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrene, MPPO, and ABS. Cel-Span® CFA 899PS is recommended for extrusion, and structural foam molding of applications that require a very fine cell structure compared to a typical endothermic foaming agent in esthetic applications.

Hangzhou Hi-Tech Fine Chemical RA is a high-temperature white foaming agent for polypropylene, rigid PVC, ABS, nylon, high density polyethylene, polycarbonate and other high-temperature foam products. P-toluenesulfonyl semicarbazide inorganic endothermic foaming agents in different ways and proportions compound can be produced Decomposition temperature range of absorption heat balance white foaming agent to adapt to a variety of soft, hard plastic and rubber and foam performance.

Sinobase Polymers Chemical AC-01 is a slightly yellowish powder. Which is stable at room temperature and is soluble in alkali, insoluble in acid, pyridine, benzene, gasoline and water. There is no toxicity or contamination..

M.G. Polyblends RFM-50 has developed foaming agent masterbatch based on Exothermic blowing agent. This blowing agent is properly dispersed in a polyolefinic resin along with some specialty chemicals which helps in creating a very fine cell structure in Rotomolded LLDPE tanks. Since our Roto foam masterbatch is in pulverized form and hence there is saving in pulverization cost to our customer. A case study report is attached herewith for your reference and better understanding of our product.

Otsuka Chemical Unifoam AZ epitomizes Otsuka Chemical's organic temperature decomposition-type foaming agent, which is mainly composed of Azodicarbonamide. UNIFOAM AZ enables the foaming cell structure in plastics and rubbers to weigh less and thus offers a variety of functioning attributes, such as heat-insulation, flexibility, sound-proof, cushion elasticity, ornamentation, etc.

Foamazol™ 96 is intended for applications where lower processing temperatures are used that require uniform cell structure with good density reduction. Has processing aid to help reduce die drool.

Poly Chem Alloy PolyFoam 4004K are additive masterbatch concentrates containing highly specialized chemical blowing agents. This product was specifically created for the production of microcellular foam structures in a variety of thermoplastic materials. PolyFoam products are available containing endothermic blowing agents, exothermic blowing agents, and as a combination of both.

Plastron foam is endothermic blowing agent applicable for full range for all applications.

Ficel® HRVP 01 is used as Rigid PVC.

BTec™ BSI-8150-FL is an exothermic CFA’s generate heat during the decomposition process, yield more volume of gas and higher gas pressure.

PVC foaming regulator WSD-90 is acrylic polymer mainly used in the shaping of PVC foam products.

Foamazol™ 50 is recommended for applications where a relatively fine cell structure is required at processing temperatures about 175-230° C (347-446° F)