Products in Polymer Additives: Mold Release Agent

Slide Products EconoMIST Mold Release Spray (No. 41612N) is NSF registered formulation safe for food applications. Non-paintable.

Stoner, Inc. E206 Silicone Mold Release is specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. It is our most popular mold release because of its versatility and high performance.

MoldWiz® EM-606SFL - A water-based external release agent with anti-rusting properties that dries at room temperature forming a monomolecular film which adheres by absorption to the mold walls and has no affinity for the resin or rubber. This selective adhesion prevents the film from easily being torn off by the demolded part resulting in numerous demoldings per release application without any necessity for washing the mold. Will not interfere with any secondary operations such as decorating, bonding, or painting.

MoldWiz® INT-1854 - A process aid additive and mold release with anti-static properties which is incorporated directly into the resin eliminating the need for an external mold release agent. Improves resin flow and line speeds. An effective addition of process aid additive will not have any adverse effect on the cured resin. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating.

MoldWiz® WB-B25 is 100% water-based. Highly economical. 20% active – dilute with water up to 30:1.Brake pads and clutch plates used on all types of metal molds for compression molding abrasive mixes with, epoxy; phenolic; MMA; polyester; or rubber binders.

Eco USA EMS-3635 Silicone Emulsions are proudly made in the USA formulated with 350cs polydimethylsiloxane silicone oil.

ULTRA-LUBE™ 230 shows outstanding performance as a dispersing aid for commonly used fillers in rubber compounding. In injection and transfer molding ULTRA-LUBE™ 230 leads to faster mold filling due to its internal lubrication. An improved mold release can also be observed. ULTRA-LUBE™ 230 also works very well as an internal release agent that prevents sticking of compounds to mill rolls, calendering bowls and internal mixer rotors. ULTRA-™ 230 has a higher solubility limit than ULTRA-LUBE™ 200.

SAK- DCS by Sun Ace is a dispersible calcium stearate. Acts as an acid scavenger, lubricant, mold release agent, extender and water repellent agent. SAK- DCS contains vegetable-based fatty acid and metal. Exhibits excellent lubricating and dispersing properties and stabilizing, hydrophobic and foam inhibiting effects. Compatible with thermoplastics. Used in plastics and rubber.

Ease Release® 2910 is a superior release agent for casting complex designs using polyurethane elastomers.

South Carolina Polymer 3530 is a high density oxidized polyethylene used in coating industries, overprint varnish, polishes, and inks to improve surface properties including scuff and mar resistance. This can also provide heat resistance in hot melt adhesives. In PVC processing, SCPG3530 can be used as a metal release agent and acts as fusion control for formulations and can also be used in aqueous emulsions & dispersions.

Rikeizai M-352 can meet the exact requirements of our customers in manufacturing regarding the surface quality of molded products, reduction of piled materials on mold surface, and improvement in workability and offer Rikeizai M-352 for foam molding.

McLube® 787 is a water-based, heat-cured emulsion designed to prevent prerelease of large rotationally molded parts and provide multiple releases per application. Delivered ready-to-use.

MATER 53 EF is a stearic acid made from from tallow. Depending on the volume solicited, vegetable oils can also be used as raw materials.

South Carolina Polymer 3525 is a high density oxidized polyethylene used in coating industries, overprint varnish, polishes, and inks to improve surface properties including scuff and mar resistance. This can also provide heat resistance in hot melt adhesives. In PVC processing, SCPG3525 can be used as a metal release agent and acts as fusion control for formulations and is good for aqueous emulsions & dispersions.

TR Industries TR-111 Slurry Wax Release is a soft white compounded wax based on refined petroleum waxes. Leaves no discoloration to molded parts and contains no silicones.

Rikeizai K-878 can meet the exact requirements of our customers in manufacturing regarding the surface quality of molded products, reduction of piled materials on mold surface, and improvement in workability and offer Rikeizai K-878 for foam molding.

Ease Release® 2300 is a high performance heavy-duty silicone release similar in characteristics to Ease Release® 300.

Slide Products Knock Out Mold Release Agent (No. 46612N) is the mold release that works where others have failed. It gets "sticky parts" cleanly out of the mold and is approved for indirect food contact.knock Out mold release imparts a light, dry coating that is amazingly effective, working for several cycles without re-application. Paintable formulation.

MoldWiz® WB-4606 - A water-based external release agent that adheres to the mold walls and has no affinity for the resin. Multiple releases for each application can be achieved.

Slide Products Universal Mold Release Agent (No. 42612H) is a broad universal release that can be used on all thermoplastics, even more sensitive plastics. It uses a non-silicone and paintable release oil. Approved as a direct food additive, Universal also meets certain requirements for molding medical products - contact us for details. Universal will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating.

Tepe Kimya Calcium Stearate (Ca-30) is a neutral calcium soap manufactured from a high-quality vegetable source of stearic acid. Calcium stearate is commonly used as an internal lubricant and release agent in polyolefin processing applications. It is hygroscopic and can also be used as an adhesion protector in rubber applications.

SAK- LCS by Sun Ace is a liquid calcium stearate. Acts as an acid scavenger, lubricant, mold release agent, extender and water repellent agent. SAK- LCS contains vegetable-based fatty acid and metal. Exhibits excellent lubricating and dispersing properties and stabilizing, hydrophobic and foam inhibiting effects. Compatible with thermoplastics. Used in plastics and rubber.

CM-N02 silicone processing aid and mold release masterbatches are comprised of polydimethylsilicone* fluid dispersed in polyethylene, polypropylene, nylon, high impact polystyrene resin, acetal copolymers and others.

RECKLI Mold Wax is a ready to use release agent for mold-making.

CEVO®-mold I-6611 is a special wax blend based on natural and semisynthetic ester waxes. CEVO®-mold I-6611 has good release effect on phenolic resins and high melting. It is used in textile bonded felts.

MLPlastics Additive Masterbatches PE SOA2545 is a additive masterbatch containing a blend of oleamide from vegetable origin and natural silica in PE carrier resin where oleamide acts as a slip agent and silica acts as an antiblock additive. Can be used in the manufacturing of polyolefin films.

CM-S01 silicone processing aid and mold release masterbatches are comprised of polydimethylsilicone* fluid dispersed in polyethylene, polypropylene, nylon, high impact polystyrene resin, acetal copolymers and others.

Qingdao Zhongsu PE Wax H-23 is a polymerized type.

OMNIWAX® #1628 Urethane Release Agent is specifically designed for cold molding of urethane parts and a release for in-mold coatings. OMNIWAX® #1628 has lower silicone content than OMNIWAX® #1628-A and therefore is especially well suited for non-pourous chrome surface molds.

Qingdao Zhongsu PE Wax H-100 is a polymerized type.

MR-F 7200 is used in appliances, electrics & electronics ,consumer goods ,packaging.

Buchem Chemie Release agent C5 is a Silicone and solvent-free release agent with good demolding properties.

TR Industries TR-226 Polymer Concrete Release is a solvent based liquid polymer external mold release. It is ready to use on a wide variety of substrates (metal, aluminum, composite, urethane, etc.) when molding/casting highly filled polyester resins for the production of polymer concrete parts.