Products in Polymer Additives: Release Agent

AP1305 is Masterbatch process aids for mineral filled compounds not containing MAH-grafted coupling agents. Improve surface quality, reduce viscosityand stick to the metal of extruder, remove of die-built-up, increase fillers dispersion and output stability.

ZINC STEARATE VG (USP Grade) - Manufactured from a high quality vegetable fatty acid with a low iodine value in a tightly controlled production operation that guarantees product uniformity.

Rikeizai K-878 can meet the exact requirements of our customers in manufacturing regarding the surface quality of molded products, reduction of piled materials on mold surface, and improvement in workability and offer Rikeizai K-878 for foam molding.

Ease Release® 2300 is a high performance heavy-duty silicone release similar in characteristics to Ease Release® 300.

Sunlube EBS DA-SF is in fine powder form and chemically known as Ethylene Bis Stearamide.

Slide Products Knock Out Mold Release Agent (No. 46612N) is the mold release that works where others have failed. It gets "sticky parts" cleanly out of the mold and is approved for indirect food contact.knock Out mold release imparts a light, dry coating that is amazingly effective, working for several cycles without re-application. Paintable formulation.

MoldWiz® WB-4606 - A water-based external release agent that adheres to the mold walls and has no affinity for the resin. Multiple releases for each application can be achieved.

Slide Products Universal Mold Release Agent (No. 42612H) is a broad universal release that can be used on all thermoplastics, even more sensitive plastics. It uses a non-silicone and paintable release oil. Approved as a direct food additive, Universal also meets certain requirements for molding medical products - contact us for details. Universal will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating.

Tepe Kimya Calcium Stearate (Ca-30) is a neutral calcium soap manufactured from a high-quality vegetable source of stearic acid. Calcium stearate is commonly used as an internal lubricant and release agent in polyolefin processing applications. It is hygroscopic and can also be used as an adhesion protector in rubber applications.

SAK- LCS by Sun Ace is a liquid calcium stearate. Acts as an acid scavenger, lubricant, mold release agent, extender and water repellent agent. SAK- LCS contains vegetable-based fatty acid and metal. Exhibits excellent lubricating and dispersing properties and stabilizing, hydrophobic and foam inhibiting effects. Compatible with thermoplastics. Used in plastics and rubber.

CM-N02 silicone processing aid and mold release masterbatches are comprised of polydimethylsilicone* fluid dispersed in polyethylene, polypropylene, nylon, high impact polystyrene resin, acetal copolymers and others.

RECKLI Mold Wax is a ready to use release agent for mold-making.

CEVO®-mold I-6611 is a special wax blend based on natural and semisynthetic ester waxes. CEVO®-mold I-6611 has good release effect on phenolic resins and high melting. It is used in textile bonded felts.

MLPlastics Additive Masterbatches PE SOA2545 is a additive masterbatch containing a blend of oleamide from vegetable origin and natural silica in PE carrier resin where oleamide acts as a slip agent and silica acts as an antiblock additive. Can be used in the manufacturing of polyolefin films.

Changzhou Juyou New Material Technology JY201-10000 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

CM-S01 silicone processing aid and mold release masterbatches are comprised of polydimethylsilicone* fluid dispersed in polyethylene, polypropylene, nylon, high impact polystyrene resin, acetal copolymers and others.

Qingdao Zhongsu PE Wax H-23 is a polymerized type.

OMNIWAX® #1628 Urethane Release Agent is specifically designed for cold molding of urethane parts and a release for in-mold coatings. OMNIWAX® #1628 has lower silicone content than OMNIWAX® #1628-A and therefore is especially well suited for non-pourous chrome surface molds.

Qingdao Zhongsu PE Wax H-100 is a polymerized type.

Sunlube ZN-10 is in fine powder form and chemically known as Zinc Stearate.

TR Industries TR-226 Polymer Concrete Release is a solvent based liquid polymer external mold release. It is ready to use on a wide variety of substrates (metal, aluminum, composite, urethane, etc.) when molding/casting highly filled polyester resins for the production of polymer concrete parts.

ChemPlasa Materials L-1030 is Polarity Amide Wax which used as a functional additive in many industrial applications.

Sunlube EBS DA-01 is in fine powder form and chemically known as Ethylene Bis Stearamide.

TR Industries TR-216 Hi-temp Liquid Wax Release is a high temperature liquid mold release wax formulated for increased production efficiency on well conditioned FRP tooling and other hard surface molds.

MoldWiz® WB-2700 - A liquid external release agent that dries at room temperature forming a monomolecular film which adheres by absorption to the mold surface and has no affinity for the molded resin or rubber. This selective adhesion prevents the film from being easily abraded by the demolded part. Numerous demoldings per application of release agent can be expected without any necessity for washing the parts. The release will not interfere with secondary finishing operations such as decorating, bonding, or painting.

Changzhou Juyou New Material Technology JY201-100 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

AL1313 is Highly filled masterbatch of antiblocking agent for blow and cast film till 15 micron. Helps the tubular opening, reduces the sticking, improve welding,give stability output of the extruder. The use together with other additives is possible without problems.

ULTRA-LUBE™ 888 is effective in improving flow properties of rubber compounds. The release effect of ULTRA-LUBE™ 888 is excellent during compounding and after curing as an internal mold release. ULTRA-LUBE™ 888 improves the dispersion of both carbon black and mineral fillers.

Schlicht Handelsgesellschaft E206 Silicone mold release is a specially developed release agent and non-stick lubricant for molded parts made of plastic, rubber, wax and similar materials. E206 is the most sought after release agent in Stoner's range due to its versatility and high performance . E206 makes part removal from molds quick and easy, allowing multiple parts to be released per application. It improves molding efficiency in many processes such as injection molding, compression molding, transfer molding, vacuum forming, direct casting, die casting and extrusion.

MLPlastics Additive Masterbatches PE SEA2555 is a additive masterbatch containing a blend of erucamide from vegetable origin and natural silica in PE carrier resin where oleamide acts as a slip agent and silica acts as an antiblock additive. Can be used in the manufacturing of polyolefin films.