Products in Polymer Additives: Injection Molding

METABLEN™ C 223A is a butadiene-based rubber and graft copolymer. It is used as an impact modifier for ABS, polyamides, PC, PLA, and other matrix resins in automotive and transportation, electrical and electronics, and consumer goods applications.FeaturesImpact resistanceSuper high impact strength in all temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ SRK-200A is a silicone-acrylic-based rubber impact modifier with heat-aging resistance and impact strength. It is used for polycarbonate/acrylonitrile butadiene styrene (PC/ABS) and polycarbonate/polybutylene terephthalate (PC/PBT) in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesChemical resistanceWeather stabilityHeat resistanceHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ A-3750 is an acrylic-modified polytetrafluoroethylene (PTFE) used as an anti-dripping agent in flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.BenefitsResins with METABLEN™ A-3750 and flame retardants achieve V-0 in UL-94 testingImproves melt tensionIncreases die swell to improve surface appearanceImproves filler dispersibilityIncreases foam expansion ratioFeaturesAnti-drippingEasy to handleHigher dispersibility than standard PTFE powders*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

VINNEX® 2501 is a vinyl acetate/ethylene copolymer powder that is frequently employed for blending with natural fibers or flours like wood, starch, and cork. Its versatility shines in the modification of biopolymers and their compounds, making it an excellent choice as an additive for biopolymers as well as for various applications such as PBS, PHA/PHB, and PLA.

VINNEX® 2523 is a solid, thermoplastic homopolymer formed through the polymerization of vinyl acetate. This resin is clear, colorless, and has no taste. It finds typical applications in modifying biopolymers and biopolymer compounds, as well as in blending with natural fibers or flours such as wood, starch, and cork.

VINNEX® 2504 is a vinyl acetate/ethylene copolymer powder known for its soft and flexible nature, which is a result of its relatively high ethylene content. The resin has a glass transition temperature below the freezing point. Typical applications for VINNEX® 2504 include blending with natural fibers or flours like wood, starch, and cork. It is highly recommended for modifying biopolymers and their compounds.

VINNEX® 2526 is a solid, thermoplastic homopolymer derived from the polymerization of vinyl acetate. This clear and colorless resin possesses a tasteless quality. It finds common applications in the modification of biopolymers and biopolymer compounds, as well as in blending with natural fibers or flours such as wood, starch, and cork.

VINNEX® 2525 is a solid, thermoplastic homopolymer obtained through the polymerization of vinyl acetate. This resin is clear, colorless, and tasteless. It is commonly used for modifying biopolymers and biopolymer compounds, as well as for blending with natural fibers or flours like wood, starch, and cork.

VINNEX® 2505 is a vinyl acetate-ethylene-vinyl ester copolymer known for its soft and flexible characteristics, attributed to its relatively high ethylene content. The resin has a glass transition temperature below the freezing point. This product is commonly used in applications such as blending with natural fibers or flours like wood, starch, and cork. Additionally, it is highly recommended for modifying biopolymers and their compounds.

VINNEX® 2502 is a vinyl acetate/ethylene copolymer powder. It is commonly used for blending with natural fibers or flours such as wood, starch, and cork. This product is highly recommended for modifying biopolymers and their compounds, including applications as an additive for biopolymers, PBS applications, PHA/PHB applications, and PLA applications.

VINNEX® 8880 is an innovative compound made from a vinyl acetate/vinyl laurate copolymer and polyvinyl acetate. It is a colorless, tasteless, and odorless thermoplastic resin that comes in a dosable form and can be easily melted. This versatile product is recommended for use in transparent films and injection molding applications. It is a flexible polymer with a low melt viscosity, making it well-suited for thermoplastic processing.

Flyadd® KSN functions as an optical brightener. This yellowish-green crystal powder is used as a good whitening agent for polyester fibers and plastics, polyamide polyacrylonitrile fibers, film, and plastic pressing & injection process. It is insoluble in water, but soluble in ordinary organic solvents.

Flyadd® 3 is an efficient nucleating agent for polyolefins. It is used in homopolymer and copolymer polypropylene and LLDPE films, as well as super high molecular weight polyethylene. The results show that the haze is decreased from 37% to about 10% by adding 0.3% Flyadd® 3 in a homopolymer polypropylene injection molded piece of 2mm thickness, and that of polypropylene random copolymer injection molded piece with the same thickness is decreased to about 6%. By adding 0.2% Flyadd® 3, the haze in LLDPE films can be decreased by not less than 87%. It can be employed in the form of a masterbatch, and in conjunction with white oil or other appropriate dispersant agents directly. The recommended processing temperature range of this product is 250 - 270°C.

Dragonsorb® 3853S functions as a UV absorber. This white or off-white granulated product finds application in the manufacture of PE tapes, injection moldings, sheets, metallocene, PP films, tapes, fibers, TPO polyacetals, ASA, ABS, and HIPS.

Dragonsorb® 3853PP5 is a UV absorber that is mainly used for the following applications: Polyethylene (PE): Flat wire, injection molding, and roll molding products. Polypropylene (PP): Flat wire, film, injection molding products, TPO, polyolefin alloy, hips, ABS, and ASA.

Dragonox® B1171 is a mixture of hindered phenolic antioxidants and phosphite antioxidants. It can provide polyamide materials with excellent processing and long-term thermal stability, excellent initial resin color, and improved light stability. It is suitable for the stabilization of polyamide and other polymers, mainly used as stabilizers of polyamide injection products, fibers, and films.

Flyadd® KCB functions as an optical brightener. This yellowish granule/crystal powder is used as a good whitening agent for plastic films, injection-molded materials, ethylene vinyl acetate (EVA) foamed plastics, and rubber products. It is insoluble in water, but soluble in ordinary organic solvents.

DCL 2GTAA Bismuth Vanadate, PY.184 is a green-shade yellow pigment with excellent alkaline stability, weather fastness, heat stability, high saturation, and high opacity. It is especially optimized for extreme alkaline stability and is thus recommended for use on high-alkaline substrates and alkaline-containing systems, such as silicate plasters and stuccos. Its high color strength, high gloss, clean shade, and easy dispersion offer significant advantages for formulation flexibility and make it a great value to use.

DCL ORS Bismuth Orange, PO.86 is honored to present a brand-new color index for the coatings and plastics market. PO.86 is the cleanest inorganic orange pigment available and is recommended for use in premium-grade coatings for automotive, industrial, and architectural applications. It is suitable for use in both solvent and water/universal coatings.

DCL 386 Chromium Oxide Green, PG.17 (extra dark/camouflage) is a dark, stable green pigment that is unaffected by acids, alkalis, and solvents. It is heat stable and offers excellent lightfastness, weatherability, and high reflectivity in the infrared range, making it ideal for military and camouflage applications.

DCL RMXA Bismuth Vanadate, PY.184 is a lemon shade yellow pigment with excellent alkaline stability, weather fastness, heat stability, high saturation, and high opacity. It is recommended for high alkaline substrates and alkaline-containing systems like silicate plasters and stuccos, as well as in many polymers.

DCL 3777 Phthalocyanine Green, PG.7 (blue shade) is a bright, blue-shaded phthalocyanine with excellent overall properties. The product is FDA-approved (Section 178.3297) and recommended for various applications in inks, coatings, and plastics. It can be easily dispersed in plastics, coatings, and water-based flexo inks.

DCL RMXS Bismuth Vanadate, PY.184 is a bright lemon shade yellow pigment designed to have the highest color strength of any Bismuth Vanadate pigment available, boasting outstanding hiding power. This pigment offers maximum value, requiring less pigment in formulations and providing a lower environmental impact, as well as excellent weather fastness and resistance properties.

DCL A3R Indanthrone Blue, PB.60 is a red shade of highly saturated blue that combines very good tinctorial properties with excellent fastness properties. DCC Blue A3R is a highly transparent blue suitable for opaque and effect shades and is used in high-end coatings, plastics, and ink applications.

DCL 7354 DPP Red, PR.254 is a yellow-shaded DPP that offers excellent opacity, high color saturation, weather resistance, heat stability, acid, alkali, and solvent resistance. It is recommended for high-end coatings and high-end plastics applications, and is FDA compliant for indirect food contact plastic applications.

DCL 1229 Quinacridone Magenta, PR.122 (Blue shade) is a standard magenta shade PR 122 that exhibits all the typical properties of quinacridone pigments. It is a low-warpage pigment, recommended for plastics, coatings, and inks, and finds a wide range of applications in coatings, such as trade sales, automotive, agricultural equipment, architectural paints, and industrial finishes. Its excellent heat stability and exterior durability make it suitable for use in various polymeric resin systems, such as polyolefins, polystyrene, polycarbonate, and ABS.

DCL 3GMXA Bismuth Vanadate, PY.184 is a greenish-yellow pigment from the new generation with excellent alkaline stability, weather fastness, heat stability, high saturation, and high opacity. It offers the best combination of high color strength and alkaline stability and is specifically designed for high-alkaline substrates and systems containing alkalinity such as silicate plasters and stuccos.

DCL 7222 Quinacridone Magenta, PR.122 is a highly versatile pigment suitable for use in coatings, inks, and plastic applications. This blue-shaded red pigment is FDA-approved and offers a clean, vibrant shade with excellent fastness properties. Widely used for shading other reds, creating special-effect metallic finishes, and formulating pinks, PR.122 is the basis for the magenta colorant worldwide and is employed in virtually all machine tinting systems, both architectural and industrial.

DCL 1816 Dianisidine Orange, PO.16 is a blue-shade Dianisidine Orange pigment designed for non-exterior film, blow molding, injection molding, and wire and cable applications. It offers very good heat stability up to 240°C and has a high tint strength compared to other orange color indices. DCC 1816 is considered to be the most cost-effective lead-free alternative to molybdate orange.

DCL CB-240-PEW-70 Sparkling Aluminum Pellets are aluminum pellets with an average particle size of 240 microns, transparent with a high metallic sparkle. The narrow particle size distribution provides brighter metallic effects. The aluminum flakes are incorporated in a wax carrier, resulting in a clean, dust-free, and easy-to-handle aluminum pigment.

DCL CB-75-PEW-70 Sparkling Aluminum Pellets are aluminum flakes with an average particle size of 75 microns, providing a bright metallic effect with good opacity and sparkle. The narrow particle size distribution results in a more brilliant metallic effect. Incorporation of the aluminum flakes in a wax carrier makes for a clean, dust-free, and easy-to-handle aluminum pigment, making it ideal for plastics masterbatch applications, as well as for direct use in plastics film extrusion, injection, and blow molding applications.

DCL CB-38-PEW-70 Sparkling Aluminum Pellets are aluminum flakes with an average particle size of 42 microns, good opacity, and a moderate metallic sparkle. The narrow particle size distribution provides brighter metallic effects. This aluminum pigment, incorporated in a wax carrier, produces a clean, dust-free, and easy-to-handle product. It offers a shiny and brilliant metallic effect for plastics masterbatch applications as well as when used directly in plastics film extrusion, injection, and blow molding applications.

DCL CB-30-PEW-70 Sparkling Aluminum Pellets are aluminum flakes with an average particle size of 30 microns, providing high opacity and brightness. The narrow particle size distribution gives a brighter metallic effect. Incorporation of these aluminum flakes into a wax carrier results in a dust-free, clean, and easy-to-handle aluminum pigment. CB-30-PEW-70 provides a shiny and brilliant metallic effect for plastics masterbatch applications as well as when used directly in plastics film extrusion, injection, and blow molding applications.

DCL CB-9-PEW-70 Sparkling Aluminum Pellets are leafing aluminum flakes with an average particle size of 9 microns, offering high opacity and brightness. Incorporating the aluminum flakes in a wax carrier results in a clean, dust-free, and easy-to-handle aluminum pigment. This product provides a shiny and brilliant metallic effect for plastics masterbatch applications as well as direct application in plastic film extrusion, injection, and blow molding.