Products in Fillers & Extenders: Polyolefins

JetFil® V700C is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is compacted for maximum extruder throughput, minimum dust, and improved dispersion.

JetFil® 575C-HB is a white, high-purity, extremely platy, fine talc. It is recommended for excellent stiffness, HDT, and dimensional stability in high-performance plastics, plastic films, and wire and cable applications. It is in compacted form for maximum extruder throughput, minimum dust, and improved dispersion.

Cimpact® 610-610C is a high-brightness, high-purity, very platy, very fine talc that is recommended for excellent stiffness, HDT, and dimensional stability, as well as improved impact strength and esthetics in high-performance plastics, foamed plastics, and plastic films. It is available in compacted form (Cimpact® 610C) for maximum extruder throughput, minimum dust, and improved dispersion.

Cimpact® 699 is an off-white, high-purity, platy, ultrafine talc with excellent top-size control. It is recommended for efficient crystal nucleation, as well as very good stiffness, HDT, dimensional stability, improved impact strength, and esthetics in high-performance plastics and plastic films.

Cimpact® 710-710C is a high-brightness, high-purity, very platy, ultrafine talc with excellent top-size control. This product is recommended for color matching, excellent stiffness, HDT, dimensional stability, impact strength, and esthetics in high-performance plastics, foamed plastics, plastic films, and the nucleation of semi-crystalline plastics. It is available in compacted form (Cimpact® 710C) for maximum extruder throughput, minimum dust, and improved dispersion.

Cimpact® 550-550C is a high-brightness, high-purity, very platy, very fine talc. It is recommended for excellent stiffness, HDT, and dimensional stability in high-performance plastics. It is available in compacted form (Cimpact® 550C) for maximum extruder throughput, minimum dust, and improved dispersion.

Cimpact® 710HS is a high-brightness, high-purity, very platy, ultrafine talc with excellent top-size control that has been surface treated to provide extended thermal and UV stability, optimum odor control, improved dispersion, and color matching along with excellent stiffness, HDT, dimensional stability, impact strength, and esthetics in high-performance plastics. It is compacted for maximum extruder throughput, minimum dust, and improved dispersion.

HYPERPLATE™ H92 is produced using a delaminating process developed by Magris Talc. HYPERPLATE™ H92 is much more lamellar than other conventionally micronized grades and provides improved mechanical properties when compounded in polyolefin and engineering thermoplastics. Higher flexural modulus, HDT, and better dimensional stability (low CLTE, shrinkage) are obtained versus conventional talc products without impairing the ductility of the molded parts. HYPERPLATE™ H92 is Magris Talc’s high-brightness, high-aspect-ratio talc, making it ideal for use in lightly colored systems.

JetFil® 700C is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is compacted for maximum extruder throughput, minimum dust, and improved dispersion.

Nicron® 674 is an ultra-fine, high-purity microcrystalline talc. It is insoluble in mineral acids, hydrophobic, and non-abrasive to compounding and processing equipment. Nicron® 674 is used in a wide variety of applications, including interior/exterior coatings, color concentrates, adhesives, sealants, and thermoplastic polymers.

JetFil® 700D is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is densified for reduced dust and ease of dispersion in low-shear extruders.

JetFil® 575P-575C is an off-white, high-purity, extremely platy, fine talc. It is recommended for excellent stiffness, HDT, and dimensional stability in high-performance plastics, plastic films, and wire and cable applications. It is available in compacted form (JetFil® 575C) for maximum extruder throughput, minimum dust, and improved dispersion.

ACMA 20T Coated Calcium Carbonate is natural, surface treated, ultra fine calcium carbonate manufactured from high purity, very white limestone.

Heartland's 85% hemp masterbatch can be used with polyolefins, PVC, PS, and other polymers.