Products in Performance Additives: Natural Rubbers (NR)

FloraRez® 485 is a high-quality glycerol ester derived from partially hydrogenated gum rosin that has undergone purification to ensure exceptional taste and odor characteristics. It is meticulously protected from contaminants. This pale-colored thermoplastic resin possesses a low acid number. In numerous countries, it is considered suitable for incorporation into chewing gum bases as an ingredient. Additionally, it serves as a resin component in a wide range of applications, including adhesives, inks, coatings, and personal care formulations, where oxidative stability is needed.

K - STOFF 440 is an oleochemical wetting & dispersing additive that offers excellent wetting characteristics and does not allow to form of the agglomerates of pigments particles in color MB application.

FloraRez® 785 is a glycerol ester derived from highly hydrogenated gum rosin. This thermoplastic resin exhibits a very pale color and demonstrates remarkable resistance to oxidation and color degradation. It serves as a valuable tackifying resin component in diverse applications such as adhesives, inks, coatings, and personal care formulations, particularly in scenarios where oxidative stability is essential.

FloraRez® LRL liquid resin is the methyl ester of partially hydrogenated gum rosin. It is a transparent, clear to pale yellow, tacky, viscous liquid that has been specially processed to minimize product odor. FloraRez® LRL is commonly used to plasticize, add tack to, or modify the properties of a variety of formulations. In fragrance compounds, it is used as a diluent, carrier, and fixative.

K - STOFF E is a refined vegetable origin bio-based dispersing agent to improve lubrication.

K - STOFF O is primary amides specially developed as mold release & slip additives for rubber application. In rubber application, these amide waxes also act as a processing aid and/or additive to improve the surface properties of both natural and synthetic rubbers such as NR, NBR, SBR, EPDM, CR, etc.

FloraRez® G85 is the glycerol ester of gum rosin, which is also known as ester gum. It is a pale-colored thermoplastic resin that has a low odor and low acid number. FloraRez® G85 is commonly used as a resin component in various adhesives, inks, coatings, and personal care compositions.

Indo-Nippon Chemical Di Octyl Phthalate (DOP) is a general-purpose plasticizer. It has good compatibility with PVC, possesses all properties required for PVC processing. It is superior in electrical performance. DOP is used as a plasticizer for PVC cables and wires, floor coverings, adhesives, leather cloth, films, calendars, perfume fixative, nitrocellulose, synthetic and natural rubber, many synthetic and natural resins, drying oils, etc., Indo-Nippon Chemical Co., Ltd. also manufactures DOP - Medical Grade with high purity, with very low free alcohol content, practically free of impurities and odor. DOP of this grade is free of any additives.

SU 120A coated sulfurs contain dispersing and wetting agents and can be used to enhance sulfur dispersion in any natural or synthetic rubber compound. They are active dispersions of oil treated sulfur at the following activities: SU 95AF = 95% (soluble), SU 109A = 75% (insoluble), SU 120A = 83% (soluble), SU 135A = 75% (½ soluble and ½ insoluble).

Rayton Chemicals 6PPD is blackish browngranules or flakes, and will slowly cake when the temperature exceeds 35-40°C.

MoldWiz® WB-640ET - A liquid external release agent that dries at room temperature forming a mono-molecular film which adheres by absorption to the mold walls and has no affinity for the resin. This selective adhesion prevents the film from easily being torn off by the demolded part resulting in numerous demoldings per release application without any necessity for washing the mold. Will not interfere with any secondary operations such as decorating, bonding, or painting.

XTEND® 19RBU - An air-drying reactive resin solution that cures to a cross-linked semi-permanent coating, which provides multiple release without transfer.

ULTRA-BLEND™ 5000 improves the homogeneity of polymer blends of different polarities different viscosities. It is quickly absorbed by the polymer matrix by wetting out the surfaces which leads to a fast incorporation of other compound ingredients. The reduction of viscosity assists down line processing, in particular milling and calendering. ULTRA-BLEND™ 5000 is best added at the beginning of the mixing cycle to achieve the optimum wetting effect.

ULTRA-LUBE™ 200 is a processing additive for most rubber compounds. It shows outstanding performance as a dispersing aid for most fillers used in rubber compounding. In injection and transfer molding ULTRA-LUBET 200 leads to faster mold filling due to its internal lubrication. An improved mold release can also be observed. ULTRA-LUBE™ 200 also works very well as an internal release agent that prevents sticking of compounds to mill rolls, calendering bowls and internal mixer rotors. ULTRA-LUBE™ 200 does not adversely interfere with most curing systems. Due to its low dosage level there is little or no effect on physical properties of the finished goods.

ULTRA-FLOW™ 700S is a very effective dispersing aid for white fillers. It is particularly effective in highly loaded Silica compounds. In the presence of silane coupling agents, it should be added after the silanization process is completed.

XTEND® 19ZAM - An air-drying reactive resin solution that cures to a cross-linked semi-permanent coating, which provides multiple release without transfer.

XTEND® 19RSS - An air-drying reactive resin solution that cures to a cross-linked semi-permanent coating, which provides multiple release without transfer.

TR Industries TR-212 High Operating Temperature Liquid Release Agent is a high temperature PTFE liquid release agent of a nearly frictionless polymer lubricant dispersed in a solvent medium. Provides a smooth thin release film that works equally well on various thermoset resins (epoxy, polyester, etc.) thermoplastics (acrylic, polycarbonate, nylon, etc.), rubber (natural, synthetic) and metal tooling applications.

MoldWiz® AZN - A liquid external release agent that dries at room temperature forming a mono-molecular film which adheres by absorption to the mold walls and has no affinity for the resin. This selective adhesion prevents the film from easily being torn off by the demolded part resulting in numerous demoldings per release application. Without any necessity for washing the parts. Will not interfere with secondary operations such as decorating, bonding, or painting.

ULTRA-BLEND™ 4000 improves the homogeneity of polymer blends of different polarities or different viscosities. ULTRA-BLEND™ 4000 is quickly absorbed by the polymer matrix by wetting out the surfaces which leads to a fast incorporation of other compound ingredients. It is best added at the beginning of the mixing cycle to achieve the optimum wetting effect. ULTRA-BLEND™ 4000 increases green tack of rubber compounds by showing some synergistic effect with tackifying resins. The morphology of the product can slightly change over several months of storage time. A softening point increase within the range of several degrees is typical.

MoldWiz® INT-34DLK - Process aid additive which is incorporated directly into the resin. Improves resin flow/fill, improves dispersion of other resin additives (reinforcements, fillers, and pigments), shortens cycle times, reduces temperatures and pressures of molding machines, and reduces or eliminates weld/knit lines. Eliminates the need for an external mold release agent. An effective addition of process aid additive will not have any adverse effect on physical properties or secondary operations such as decorating, printing, bonding, or plating

MoldWiz® WB-GR50 - A water based external release agent that dries at room temperature forming a monomolecular film which adheres by adsorption to the mold walls and has no affinity for the resin. This selective adhesion prevents the film from easily being torn off by the demolded part. Will not interfere with any secondary operations such as decorating, bonding, or painting

Ve Chemical N550 plays a crucial role in the rubber industry. They are widely used in tires and rubber products.When used in tires it ensures a high resistance to abrasion, good road handling and aging resistance.Carbon Black is also an important ingredient in the production of a multitude of other rubber goods like profiles, hoses and anti-vibration systems.

Tina Organics Trixylenyl Phosphate is developed mainly for Oil Industry users, meeting the standard of air release.

ULTRA-LUBE™ IMX is a highly effective internal lubricant and dispersing aid for specialty elastomers, like HNBR, XNBR, ECO and exotic polymers. ULTRA-LUBE™ IMX is a synergistic blend of primary amide and a highly thermal stable fatty acid derivative, thus shrinkage after post curing will not be affected. ULTRA-LUBE™ IMX improves mold and extrusion flow, prevents sticking on metallic surfaces and greatly enhances surface feel and finish of finished rubber articles.

ULTRA-FLOW™ 800 is a zinc free dispersing aid for both carbon black and white fillers. It is particularly applied where zinc soaps are restricted. In the presence of silane coupling agents, ULTRA-FLOW™ 800 should be added after the silanization process is completed.

Aqualease® 75 is a concentrated version of Aqualease® 50. It is an emulation of silicone polymers featuring corrosion protection and improved film formation. This formula is designed to release synthetic and natural rubber, microcellular and solid polyurethane elastomers, and thermoplastic resins.

ULTRA-LUBET™ 160 is highly effective in improving flow properties of rubber compounds. This effect is based on a reduction of intermolecular friction and external friction against metal surfaces. ULTRA-LUBE™ 160 is outstanding during the compounding stage and after vulcanization as a mold release. Besides, it is highly effective as an internal release agent in preventing rubber compounds sticking to open mill rolls as well as to rotors in internal mixers. ULTRA-LUBE™ 160 has a stabilizing effect on the tendency of re-crystallization in CR compounds.

Alkyl Amines Chemicals Monomethylamine is available as anhydrous (liquefied gas under pressure) & 40 % , 45 % & 50% solution. Clear, colorless liquid with strong ammonical odor.

ULTRA-LUBE™ 230 shows outstanding performance as a dispersing aid for commonly used fillers in rubber compounding. In injection and transfer molding ULTRA-LUBE™ 230 leads to faster mold filling due to its internal lubrication. An improved mold release can also be observed. ULTRA-LUBE™ 230 also works very well as an internal release agent that prevents sticking of compounds to mill rolls, calendering bowls and internal mixer rotors. ULTRA-™ 230 has a higher solubility limit than ULTRA-LUBE™ 200.

Vatan Plastik San. Tic. AS Diotyl Phthalate (DOP) is a plasticizer with superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

ULTRA-LUBE™ 888 is effective in improving flow properties of rubber compounds. The release effect of ULTRA-LUBE™ 888 is excellent during compounding and after curing as an internal mold release. ULTRA-LUBE™ 888 improves the dispersion of both carbon black and mineral fillers.