MOCOM Compounds ALCOM® LDDC PMMA 1000UV18123 BK1016-11 is a translucent, UV stabilized Polymethylmethacrylate polymer used for Automotive, Lighting, and interior decoration/finishing, light transparent components, and Black Panel-Technology applications such as lamp covers, display elements, and operating elements. Pre-drying conditions involve 80°C in a dry air (dessiccant) dryer for 3-4 hours and 80°C in an air circulating dryer for 4-6 hours with a maximum moisture content of less than 0.02%. For processing injection molding, the melt temperature should be between 220-270°C and the mold temperature should be between 50-80°C. It should be protected from light.

MOCOM Compounds ALCOM® LDDC PMMA 1000 UV 18124 BK1074-11 is a polymethylmethacrylate base polymer with a UV stabilized filler/additive system suitable for applications such as lamp covers, display elements, operating elements, and light transparent components in automotive and lighting markets. Pre-drying conditions include 80°C in a dry air (dessiccant) dryer for 3-4 hours and 80°C in an air circulating dryer for 4-6 hours, with a maximum moisture content of <0.02%. For injection molding, melt temperature should be between 220-280°C and mold temperature should be between 50-80°C.

Esschem incorporates sustainable plant-based plasticizers into methyl methacrylate MMA bead polymers. These innovative additives are designed to enhance the flexibility and workability of methacrylate-based polymers. By incorporating bio-plasticizers into MMA bead copolymers, the resulting materials exhibit increased flexibility and reduced glass transition temperature, melting points, and tensile strengths.The inclusion of higher molecular weight components contributes to stronger and more heat-resistant materials.Furthermore, the particle size plays a crucial role in surface properties, where smaller particles enhance adhesion while larger particles contribute to robustness and rigidity.

Esschem MMA - EMA Bead Copolymers are a range of bead copolymers combining methyl methacrylate (MMA) with ethyl methacrylate (EMA). These copolymers exhibit high glass transition temperatures, melting points, and tensile strengths, making them ideal for industries that demand strength and rigidity. By increasing the EMA content, the copolymers offer greater flexibility and the potential for enhanced optical properties. This results in lower glass transition temperatures, melting points, and tensile strengths, providing desired flexibility and transparency. Esschem provides control over the molecular weight to further enhance these properties, allowing for a more rigid and robust copolymer or targeting flexibility and transparency as needed. Particle size control enables fine-tuning of processability and adjustment of surface properties, leading to better performance in applications that prioritize transparency.

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Durez™ 00118 by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used Durez™ 00118 is certified as UL Flame Rated. It is available in Granules form.

ALNOVOL® UF 410 RPC, a carbamic resin on silica, demonstrates compatibility with various synthetic and natural rubbers. Notably, its composition prevents the formation of a clear solution in solvents due to the silica carrier. Primarily functioning as a crosslinking agent and binder, this resin is specifically designed for applications in tires. Its elastomeric functions contribute as a resin within this context.

Durez™ 29502 B by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used It is available in Granules form.

DAP D72/6120F is a versatile diiallyl ortho-phthalate molding compound, filled with short glass fibers and featuring flame retardant properties. Supplied in a free-flowing granular form, this compound is well-suited for a variety of molding applications. It can be easily molded using compression, transfer, or injection equipment and can be preformed with ease. An important distinction is that it has passed NASA outgassing tests, indicating its suitability for applications with stringent outgassing requirements, particularly in industries like aerospace where such standards are critical.