Products in Thermoset Resins: Electrically Insulating

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METTON® LMR Expanding Grade M1537-XXE Polymers are tough and durable engineering plastics (poly-DCPD). As an alternative to conventional materials like wood and metal, they provide component design flexibility with integrated functionality and part consolidation potential, akin to injection molding. The low-pressure molding process is ideal for producing large plastic parts used in heavy trucks, agriculture, construction, the military, and other industrial applications.

METTON® LMR M1540 Polymers are tough and durable engineering plastics (poly-DCPD). They offer part design freedom with integrated functionality and part consolidation opportunities, similar to injection molding, as a replacement for traditional materials like wood and metal. Large plastic components used in military, agricultural, construction, heavy-duty vehicles, and other industrial applications may be produced with the low-pressure molding technique.

METTON® LMR M1534 Polymers are tough and durable engineering plastics (poly-DCPD). They offer part design freedom with integrated functionality and part consolidation opportunities, similar to injection molding, as a replacement for traditional materials like wood and metal. The low-pressure molding process is ideal for producing large plastic parts used in heavy trucks, agriculture, construction, the military, and other industrial applications.

METTON® LMR M1539 Polymers are tough and durable engineering plastics (poly-DCPD). They offer part design freedom with integrated functionality and part consolidation opportunities, similar to injection molding, as a replacement for traditional materials like wood and metal. The low-pressure molding process is ideal for producing large plastic parts used in heavy trucks, agriculture, construction, the military, and other industrial applications.

METTON® LMR Reinforced Grade M5000-GT Polymers are tough and durable engineering plastics (poly-DCPD). It offers part design freedom with integrated functionality and part consolidation opportunities, similar to injection molding, as a replacement for traditional materials like wood and metal. The low-pressure molding process is ideal for producing large plastic parts used in heavy trucks, agriculture, construction, the military, and various industrial applications.

METTON® LMR High-HDT Grade M3000-TH Polymers are tough and durable engineering plastics (poly-DCPD). They offer part design freedom with integrated functionality and part consolidation opportunities, similar to injection molding, as a replacement for traditional materials like wood and metal. The low-pressure molding process is ideal for producing large plastic parts used in heavy trucks, agriculture, construction, the military, and other industrial applications.

Cosmic Alkyd 3D36 is a specialized alkyd molding compound that incorporates long glass fibers for enhanced impact resistance and flame retardant properties. Supplied in flake form, it is designed for ease of use and versatility in molding applications. This compound molds readily using standard compression or transfer equipment, and it maintains its performance for up to one year when stored at temperatures of 100°C or below. Its unique blend of properties makes it suitable for applications that require both impact resistance and flame retardancy.

METTON® LMR M1537 Polymers are tough and durable engineering plastics (poly-DCPD). They offer part design freedom with integrated functionality and part consolidation opportunities, similar to injection molding, as a replacement for traditional materials like wood and metal. The low-pressure molding process is ideal for producing large plastic parts used in heavy trucks, agriculture, construction, the military, and other industrial applications.

METTON® LMR Flame Retardant Grade M2200-FR Polymers are tough and durable engineering plastics (poly-DCPD). They offer part design freedom with integrated functionality and part consolidation opportunities, similar to injection molding, as a replacement for traditional materials like wood and metal. The low-pressure molding process is ideal for producing large plastic parts used in heavy trucks, agriculture, construction, the military, and other industrial applications.

RS-2272 is a patented, castable, lead free insulating grade filled epoxy resin specifically designed for high voltage insulator applications requiring X-Ray shielding. This material provides good electrical grade insulation properties, high mechanical properties, and superior arc resistance to any lead oxide filled epoxy. This material is non-flammable and meets UL94V-0.

RS-2200 is a castable, filled epoxy resin with good overall general properties. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and milk alkalines.

RS-2297 is a patented, very high density, filled, castable, lead free insulating grade epoxy resin specifically designed for high voltage insulator applications requiring x-ray shielding. This material provides greater than 28% of the x-ray shielding of lead metal, and has superior x-ray shielding to the industry standard 30% lead oxide filled “orange” epoxy. This high density material is non-hazardous and meets UL94V-0 requirements.

RS-2242 is a castable, filled epoxy resin specifically designed for high voltage insulator applications. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and mild alkalines. This material has superior arc resistance as compared to standard electrical grade epoxy materials. In addition, this material is non-flammable and meets UL 94/V-0 requirements.

RS-2525 is a castable, filled general purpose epoxy resin designed for electrical insulator applications. This material provides good electrical grade insulation properties, and superior resistance to chemicals including concentrated acids and mild alkalines.

RS-2295 is a patented, high density filled, castable, lead free insulating grade epoxy resin specifically designed for high voltage insulator applications requiring X-Ray Shielding. This material provides 20% of the X-Ray Shielding of lead metal, and is equivalent to industry standard 30% lead oxide filled “Orange Epoxy”. This material is non-hazardous and can be processed, machined and disposed of as a non hazardous material. This material also meets UL94V-0 flammability rating.

RS-2320 is a castable, filled epoxy resin with good overall general properties and enhanced impact strength over other highly filled epoxy materials. This material provides excellent electrical grade insulation properties, high mechanical properties, and low thermal expansion. This material is self extinguishing.

RS-2271 is a castable, filled epoxy resin specifically designed to operate under high voltage conditions in indoor applications, as well as SF6 environments. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and mild alkalines.

RS-2515 is a castable, high temperature resistant filled epoxy resin specifically designed to operate at temperatures up to 500F. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and mild alkalines.

RS-2243 is a castable, filled epoxy resin specifically designed for high temperature, high voltage insulator applications. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and mild alkalines. This material has superior arc resistance as compared to standard electrical grade epoxy materials. In addition, this material is non-flammable and meets UL94V-0 requirements.

RS2240 is a castable, filled epoxy resin specifically designed for high voltage insulator applications. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids, and mild alkalines. This material also offers superior arc resistance as compared to standard electrical grade epoxy materials. In addition, this material is non-flammable and meets UL94V-0 requirements.

RS-2279 is a castable, filled epoxy resin specifically designed to operate under high voltage conditions in outdoor applications, as well as SF6 environments. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and mild alkalines.

RS-2243 is a castable, filled epoxy resin specifically designed for high temperature, high voltage insulator applications. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and mild alkalines. This material has superior arc resistance as compared to standard electrical grade epoxy materials. In addition, this material is non-flammable and meets UL94V-0 requirements.

RS-2299 is a patented, high density filled, castable, lead free insulating grade epoxy resin specifically designed for high voltage insulator applications requiring x-ray shielding. This material provides greater than 20% of the x-ray shielding of lead metal, and is equivalent or better than industry standard 30% lead oxide filled “orange” epoxy. This material is non-hazardous, and meets UL94V-0 flammability requirements.

RS-2277 is a patented, castable, lead free insulating grade filled epoxy resin specifically designed for high voltage insulator applications requiring X-Ray shielding. This material provides good electrical grade insulation properties, high mechanical properties, and superior arc resistance to any lead oxide filled epoxy. This material has equal x-ray shielding to a 25% lead oxide filled epoxy. This material is non-flammable and meets UL94V-0 requirements.

DI-PAK E-4501 Easily pourable, thermally conductive, shock resistant potting compounds that are ideally suited for low and high production applications. This series of DI-PAK products reduce rejects by exhibiting extremely low stress on potted components. All three of the above DI-PAK E products are flame retardant and meet UL 94V-0 requirements.

CLH5185 is a heat cure, low stress, extremely tough, epoxy casting compound. It was specifically designed for casting large bushings, insulators, instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets ul94-hb flammability requirements.

RIGIDDI-PAK R-4525 SeriesA general purpose series of low viscosity, strong, potting and encapsulating compounds. DI-PAK R-4525 has excellent electrical insulating properties and bonds well to many substrates. By varying the curing agents, the desired cure and working life can be obtained.

DI-PAK E-4500 SERIESFlexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Flame retardant (FR), accelerated 3 minute (-3) gel time, and black or unpigmented versions are available.

DI-PAK E-4600 SERIESFlexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Available in flame retardant (FR), 3 minute (-3) gel time, and in black or unpigmented.

CLR1331 is a low stress, extremely tough casting compound which was developed for casting low voltage bushings and insulators.

DI-PAK E-4600 SERIESFlexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Available in flame retardant (FR), 3 minute (-3) gel time, and in black or unpigmented.

CLR1837 is a heat cure, low stress, extremely tough, epoxy casting compound. It was specifically designed for casting large bushings, insulators, instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets ul94-hb flammability requirements.