Products in Thermoset Resins: Good Processability

Esschem EMA - EHMA Bead Copolymers are a unique combination of ethyl methacrylate (EMA) and 2-ethylhexyl methacrylate (EHMA) that offers exceptional properties.The incorporation of 2-EHMA disrupts the polymer chain packing, resulting in lower glass transition temperatures and enhanced low-temperature flexibility, while significantly improving transparency.With variations in molecular weight, Esschem can further enhance the strength and flexibility of these bead copolymers. The smaller particle size of the beads improves processability and has the potential to enhance transparency, while larger particles contribute to a more rigid material.

Esschem MMA - BMA Bead Copolymers are a range of copolymers combining methyl methacrylate (MMA) with butyl methacrylate (BMA).These copolymers offer a versatile solution with varying properties based on the MMA and BMA content. Higher MMA content results in copolymers with elevated glass transition temperatures, melting points, and tensile strengths, making them suitable for applications that require strength and rigidity. Conversely, increased BMA content lowers these properties while enhancing processability and potential flexibility.By adjusting the molecular weight, Esschem can tailor the copolymer structure to achieve specific rigidity requirements. Additionally, controlling the particle size allows for improvements in mechanical strength, with smaller particles offering larger surface area to volume ratios.

Esschem MMA Bead Copolymers are a collection of methyl methacrylate (MMA) bead polymers renowned for their exceptional properties.These polymers exhibit impressive features such as high glass transition temperature, melting point, tensile strength, and impact resistance.Esschem meticulously controls the reaction conditions to create polymers with specific molecular weight distributions, allowing for a wide range of desired properties. This precise control enhances the inherent strength, rigidity, and impact resistance of MMA polymers.Moreover, by carefully manipulating the particle size, Esschem offers the flexibility to customize properties such as hardness, toughness, and processability.

Esschem MMA - EMA Bead Copolymers are a range of bead copolymers combining methyl methacrylate (MMA) with ethyl methacrylate (EMA). These copolymers exhibit high glass transition temperatures, melting points, and tensile strengths, making them ideal for industries that demand strength and rigidity. By increasing the EMA content, the copolymers offer greater flexibility and the potential for enhanced optical properties. This results in lower glass transition temperatures, melting points, and tensile strengths, providing desired flexibility and transparency. Esschem provides control over the molecular weight to further enhance these properties, allowing for a more rigid and robust copolymer or targeting flexibility and transparency as needed. Particle size control enables fine-tuning of processability and adjustment of surface properties, leading to better performance in applications that prioritize transparency.

PANDEX, WALL-LITE series are single-pack and twin-pack polyurethane resins developed for waterproofing of rooftops and walls and adhesion of rubber chips. The series characteristically excel in workability and hardening effects.

PANDEX, WALL-LITE series are single-pack and twin-pack polyurethane resins developed for waterproofing of rooftops and walls and adhesion of rubber chips. The series characteristically excel in workability and hardening effects.

RIGIDDI-PAK R-4528 SeriesA black, flame retardant, thermally conductive, high performance series that can be used in all types of electrical components. Combined with its ability to dissipate heat, DI-PAK R-4528 also provides low linear thermal expansion, low shrinkage, and low exothermic heat while curing. Meets UL requirements.

Sino Polymer MFE 711, formerly known as MFE-11, is a premium standard Bisphenol-A type epoxy vinyl ester resin. It provides resistance to a wide range of acids, alkalis, bleaches and solvents used in many chemical processing industry applications.

RIGIDDI-PAK R-4242/4243Low cost, fast set potting compounds with excellent properties and FAST TURNOVER. R-4242/4243 are 1:1 by weight or volume, making them ideal for hand pour or automatic metering systems.

RIGIDDI-PAK R-4307A high performance, long working life potting compound for potting/encapsulating units requiring high physical strength and excellent electricals. DI-PAK R-4307 is a holds its mechanical and electrical properties while under the most severe conditions. This is due to its low water absorption, thermal shock resistance, and retention of strength at elevated temperatures.

RIGIDDI-PAK R-4545 SeriesA very low viscosity potting and encapsulating system with excellent flow and penetration into the most intricate electronic components, without voids or porosity. The R-4545 Series cure to a hard, shiny, high gloss, plastic finish that is free from "blushing" under all humidity conditions. The R-4545 Series is ideal for electrical applications where surface finish and appearance are critical.

RIGIDDI-PAK R-4806 & R-4807 A/BLow viscosity, fast cure, high performance, potting and encapsulating compounds with excellent properties and FAST TURNOVER. Both are two part systems with 1:1 mix ratios by volume.

RIGIDDI-PAK R-4525 SeriesA general purpose series of low viscosity, strong, potting and encapsulating compounds. DI-PAK R-4525 has excellent electrical insulating properties and bonds well to many substrates. By varying the curing agents, the desired cure and working life can be obtained.

Texalan® W295A product has high hydrolysis resistance, solvent resistance, good hand feeling, and high recycling rate. Also has high strength, excellent processing performance.

RIGIDDI-PAK R-4525 SeriesA general purpose series of low viscosity, strong, potting and encapsulating compounds. DI-PAK R-4525 has excellent electrical insulating properties and bonds well to many substrates. By varying the curing agents, the desired cure and working life can be obtained.

TEXALAN® 295A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feeling, repeated benefits High utilization rate, high strength and excellent processing performance.

RIGIDDI-PAK R-4545 SeriesA very low viscosity potting and encapsulating system with excellent flow and penetration into the most intricate electronic components, without voids or porosity. The R-4545 Series cure to a hard, shiny, high gloss, plastic finish that is free from "blushing" under all humidity conditions. The R-4545 Series is ideal for electrical applications where surface finish and appearance are critical.

The HFFR-XL compound product range is a group of thermosetting, halogen-free flame retardant, low-smoke and non-toxic compounds based on polyolefins and mineral fillers, which can be crosslinked using heat or moisture. A catalyst masterbatch is added during the final extrusion together with the main compound (SIOPLAS method). These products are suitable for producing cross-linked insulation or sheathing.

TEXALAN® 298A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feeling, repeated benefits High utilization rate, high strength and excellent processing performance.

RIGIDDI-PAK R-4528 SeriesA black, flame retardant, thermally conductive, high performance series that can be used in all types of electrical components. Combined with its ability to dissipate heat, DI-PAK R-4528 also provides low linear thermal expansion, low shrinkage, and low exothermic heat while curing. Meets UL requirements.

TEXALAN® 290A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feeling, repeated benefits High utilization rate, high strength and excellent processing performance

PANDEX, WALL-LITE series are single-pack and twin-pack polyurethane resins developed for waterproofing of rooftops and walls and adhesion of rubber chips. The series characteristically excel in workability and hardening effects.

TEXALAN® 285A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feel, repeated benefits High utilization rate, high strength and excellent processing performance

RIGIDDI-PAK R-4525 SeriesA general purpose series of low viscosity, strong, potting and encapsulating compounds. DI-PAK R-4525 has excellent electrical insulating properties and bonds well to many substrates. By varying the curing agents, the desired cure and working life can be obtained.

RIGIDDI-PAK R-4545 SeriesA very low viscosity potting and encapsulating system with excellent flow and penetration into the most intricate electronic components, without voids or porosity. The R-4545 Series cure to a hard, shiny, high gloss, plastic finish that is free from "blushing" under all humidity conditions. The R-4545 Series is ideal for electrical applications where surface finish and appearance are critical.

47N is a low-flow epoxy prepreg engineered for binding multilayer epoxy rigid-flex or attaching heatsinks to multilayer PCBs. An optional low lamination temperature protects components already mounted on the PCB.

RIGIDDI-PAK R-4528 SeriesA black, flame retardant, thermally conductive, high performance series that can be used in all types of electrical components. Combined with its ability to dissipate heat, DI-PAK R-4528 also provides low linear thermal expansion, low shrinkage, and low exothermic heat while curing. Meets UL requirements.

PANDEX, WALL-LITE series are single-pack and twin-pack polyurethane resins developed for waterproofing of rooftops and walls and adhesion of rubber chips. The series characteristically excel in workability and hardening effects.

TEXALAN® 271D This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feeling, repeated benefits, High utilization rate, high strength and excellent processing performance.

RIGIDDI-PAK R-4242/4243Low cost, fast set potting compounds with excellent properties and FAST TURNOVER. R-4242/4243 are 1:1 by weight or volume, making them ideal for hand pour or automatic metering systems.

RIGIDDI-PAK R-4525 SeriesA general purpose series of low viscosity, strong, potting and encapsulating compounds. DI-PAK R-4525 has excellent electrical insulating properties and bonds well to many substrates. By varying the curing agents, the desired cure and working life can be obtained.

Texalan® 360A product has excellent processing properties, oil/solvent resistance, low temperature flexural resistance, high resilience, and flexibility.

TEXALAN® 282A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feeling, repeated benefits High utilization rate, high strength and excellent processing performance.

PANDEX, WALL-LITE series are single-pack and twin-pack polyurethane resins developed for waterproofing of rooftops and walls and adhesion of rubber chips. The series characteristically excel in workability and hardening effects.

RIGIDDI-PAK R-4912 & R-4260 A/BLow viscosity, fast cure, high performance, high HDT potting and encapsulating compounds with excellent properties and FAST TURNOVER. Both are two part systems with 1:1 mix ratios by volume.Available in flame retardant

Epoxy GS is a solvent-free two-component adhesive filler, based on epoxy resin, with excellent processing characteristics.