Products in Polyesters

KPR 6440 by Kemrock Industries and Exports is a general purpose, fire retardant orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6440 is recommended for FRP composites.

Ocpol 710 thixotropic, orthophthalic unsaturated polyester resin. The resin is non-accelerated. It imparts outstanding water resistance and it is suitable for building boats, water tanks, bath tubs shower trays etc.

HK Research R0220 is a resilient, light stabilized void free polyester casting resin.

Ares P166 N is styrene-free resin and ideal as a vehicle for medium viscosity coloring pastes. Good absorption of pigments and good wettability of fillers. Good compatibility in systems. High stability.

Ares P106 is orthophthalic resin with medium-low reactivity and good elongation. Peak controlled. The wettability of the fillers is excellent.

DEPOL P-460 is a middle reactive, non-promoted, unsaturated orthophthalic based polyester resin.

Siropol 8351 is a medium reactivity, orthophthalic polyester resin dissolved in styrene monomers. It has been especially formulated to provide rapid cure without the characteristic high exotherm normally associated with resins used in filament winding applications. SIROPOL ­ 8351 demonstrates good toughness, water resistance and is especially suited for filament winding application. SIROPOL­ 8351 is a non­promoted and no thixotropic resin with good shelf stability at elevated temperatures. Optimum properties are attained when SIROPOL­ 8351 is diluted with styrene to 175­225 cps.

ATTSHIELD OP 720 is used in the hand molding and spraying of fiberglass. Allows for the possibility of working at lower temperatures. This resin brand's products have improved hydrolysis resistance, weather resistance, high strength and elongation, and resistance to alkaline environments. Use an accelerator-hardener system to work with resin at room temperature (cobalt octoate-MEKP)

Ares P255 is an ISO / NPG resin with good resistance to water and not very aggressive chemical agents. Characterized by low shrinkage and good mechanical properties. Ideal for solid surface applications. Available in the modified acrylic version.

Ares P807 is resin for reinforcing bathtubs and shower trays, excellent adhesion to ABS, good loadability and compatibility with glass fibers. Excellent dimensional stability. Also ideal for spray up processing. Low emission version (LSE) available.

RALUPOL® UP 804 molding compounds are characterized by excellent dimensional stability with very low processing and post-shrinkage. Due to their high rigidity and excellent heat resistance, RALUPOL® products withstand short-term heat loads. They have excellent electrical insulation and dielectric properties, which are retained even with long-term use at high temperatures. The reason for this is high tracking resistance (CTI> 600 V), arc resistance, glow wire test (GWFI 960 ° C) and a high electrical RTI (relative temperature index) of 170 ° C according to UL 746 (IEC 60216 / T1).

SIROPOL 9227 resin is medium viscosity, un­promoted vinyl ester based resin. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food subject to user’s compliance with the prescribed limitations of that regulation.

Ares P130 is versatile medium reactivity DCPD resin for all sectors. Low styrene content and excellent dimensional stability. Good mechanical characteristics and excellent compatibility with glass fibers. Also ideal for spray up use.

KPR 6615 by Kemrock Industries and Exports is an isophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6615 is used in gel coats and marine applications. Approved by Lloyd’s Register of Shipping.

ATTSHIELD XO - Unsaturated isophthalic polyester resin with good mechanical and glass wetting properties. The resin is thixotropic, has been accelerated, and has a low styrene emission system. At normal room temperature, cure with methyl ethyl ketone peroxide (MEKP).

MERICAN 9406 has a Mid-reactivity remarks and Iso as a type.

Siropol P 9170 resin is fast­-cure, resilient polyester for use where very clear casting is needed. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food subject to user’s compliance with the prescribed limitations of that regulation.

SIROPOL 7241 resin is medium viscosity, excellent fiber wet­out and rigid polyester resin. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food subject to user’s compliance with the prescribed limitations of that regulation.

BC 4544 is a polyester resin base compound that is easy to use, sets in minutes, and can be sanded or carved almost immediately. BC 4544 can be carved, sanded, filed, scraped, drilled, tapped or machined to a feather edge. No paint preparation is required and even accepts stain better than wood.

HK Research R0231 is a resilient, light stabilized acrylic modified polyester casting resin.

Sino Polymer MFE 707N is epoxy vinyl ester resin is a brominated novolac-epoxy based vinyl ester developed for the application where need both corrosion resistance and high temperature resistance with excellent fire retardance.

KPR 6630 by Kemrock Industries and Exports is an isophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6630 is suitable for processing by sheet and dough molding(SMC/DMC). Recommended for FRP composites.

Vikram Resins and Polymers VRP 2131 is a medium reactive Isophthalic Acid based Unsaturated Polyester Resin. It has better mechanical, corrosion, and electrical properties as compared to Orthophthalic Polyesters, has high water resistance and good wetting, and is fast curing. VRP 2131 is suitable for hand lay-up, RTM, pultrusion, filament winding, and other molding techniques and can be used for the manufacture of marine products, tanks, pipes, automobile parts, gratings etc. Also, it can be supplied as a pre-accelerated, thixotropic, or low viscosity resin.

Ares P198 is resin suitable for casting processes. Ideal for toilet seats. Excellent transparency, medium reactivity. Peak controlled to avoid tension. Available in low emission version (LSE).

Polipol 3455 is an orthophthalic based, low reactivity, medium viscosity, general purpose polyester resin. It is designed for artificial marble and casting applications.

KPR 6450 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6450 is suitable for processing by resin transfer molding (RTM). Recommended for FRP composites.

KPR 6400 by Kemrock Industries and Exports is an orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6400 is used in UV-stabilized roof lights.

Polipol 351-TA-LSE-H40 is a Hand lay-up / Spray-up high reactivity polyster.

Ares P167 LV is styrene-free resin ideal as a vehicle for low viscosity coloring pastes. Good absorption of pigments and fillers. Excellent compatibility in systems. High stability

Resin-SA Pty Ltd RES GP 002 is a general purpose ortho resin for which is used for spray up/ hand laminating.