Products in Adhesives & Sealants: Polycarbonate (PC)

CHT Group SilSo Bond 14000 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of alkoxy cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.

Crestabond® M1-90HV/2 is a toughened, two component 10:1 acrylic adhesive designed for bonding composites, thermoplastics and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations. Demonstrating excellent impact, peel, shear, compressive strength and fatigue resistance properties across all bonded parts.

Crestabond® M1-60HV/2 is a toughened, two-component 10:1 acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations. Demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts.

Crestabond® M1-02 Structural Adhesive is the latest addition to the Crestabond® range of primer-less structural adhesives. It is now the fastest-curing grade, with a 10:1 ratio option available. This product is developed for high-volume assembly of smaller parts, which must be ready to handle in under 3 minutes for cost-effective productivity.

Crestabond® M1-04 Structural Adhesive is a toughened, two-component 10:1 MMA structural adhesive that is designed for bonding a wide range of substrates, including metals, plastics, and composite materials in industrial applications. This adhesive demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. Crestabond® is a primer-less MMA adhesive requiring minimal surface preparation, which helps reduce overall production costs and increase productivity. This product has a working time of 3 to 5 minutes.

Crestabond® M1-20 Structural Adhesive is a toughened, two-component 10:1 MMA structural adhesive that is designed for bonding a wide range of substrates, including metals, plastics, and composite materials in industrial applications. This adhesive demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. Crestabond® is a primer-less MMA adhesive requiring minimal surface preparation, which helps reduce overall production costs and increase productivity. This product has a working time of 16 to 22 minutes.

Crestabond® M1-10 Structural Adhesive is a toughened, two-component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations. It demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts.

Crestabond® M1-05 Structural Adhesive is a toughened, two-component 10:1 MMA structural adhesive that is designed for bonding a wide range of substrates, including metals, plastics, and composite materials in industrial applications. This adhesive demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. Crestabond® is a primer-less MMA adhesive requiring minimal surface preparation, which helps reduce overall production costs and increase productivity. This product has a working time of 4 to 7 minutes.

Crestabond® M1-04SL Structural Adhesive is a toughened, two-component 10:1 acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts.

Crestabond® M1-30 Structural Adhesive is a toughened, two-component 10:1 MMA structural adhesive that is designed for bonding a wide range of substrates, including metals, plastics, and composite materials in industrial applications. This adhesive demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. Crestabond® is a primer-less MMA adhesive requiring minimal surface preparation, which helps reduce overall production costs and increase productivity. This product has a working time of 25 to 35 minutes.

A very light tack base meant for quick release where it is needed. It remains tacky for multiple runs and resists ambient dust accumulation. The PSTB cures rapidly and is low odor.

ACRALOCK® SA10-50A is high viscosity based methacrylate adhesives. Formulated to use with several activators and mixed at a ratio of 10:1, for bulk dispensing. SA10- 50A is used for a shorter working time. By choosing from four different strength activators, the user can more readily dial into a specific working time range for specific assembly application requirements. These products are designed with high gap filling capabilities and high strength when adhered to assemblies of thermoset composites and plastics and are formulated to be primerless on most metal surfaces.

AFTC Silvertape™ 5308 is a double sided high performance acrylic based adhesive tape, which is especially designed for a variety of materials with high surface energy like glass, PMMA & PC. This tape is capable of absorbing the different thermal expansions of two materials.

AFTC Silvertape™ 5305 is a double sided high performance acrylic based adhesive tape, which is especially designed for a variety of materials with high surface energy like glass, PMMA & PC. This tape is capable of absorbing the different thermal expansions of two materials.

AFTC Silvertape™ 5315 is a double sided high performance acrylic based adhesive tape, which is especially designed for a variety of materials with high surface energy like glass, aluminum and steel. This tape is capable of absorbing the different thermal expansions of two materials.

Adhesive Films PAF-130 is used in plasticizers, home wash and dry clean applications.

Adhesive Films UAF-438 is used in plasticizers, home wash and dry clean applications.

ACRALOCK® SA10-15AW is base methacrylate adhesives. These base adhesives are UV stabilized and when used at a 10:1 mix ratio with either our bright white activator ACT-6B WHT or ACT-1-5B OWT activators. When cured this adhesive can provide a white cured color that has resistance to the effects of UV exposure. These adhesive products also provide high shear strength when adhered to assemblies of thermoset composites, plastics, and metals.

Adhesive Films PAF-110 is used in plasticizers, home wash and dry clean applications.

EVA Hotmelt A1189 is adhesives are natural products and may vary slightly in color. the adhesive is white-transparent and has good adhesion to many materials, such as wood, wood-based materials, paper, cardboard, textiles, glass, ceramic and plastics such as melamine, ps, pvc, pmma, pc and pu foam.

AFTC Silvertape™ 5032 is a double sided high performance acrylic based adhesive tape. This conformable tape is especially designed for the bonding of transparent materials like glass, PMMA and PC. It also is capable of absorbing the different thermal expansions of two materials. This acrylic foam tape has a very high transparency.

Protex 40S is a 4 mil latex saturated paper used for protection of stretched and flat acrylic, plexiglass, polycarbonate, and other plastic surfaces either in flat sheet or formed states.

ACRALOCK® SA10-20A is base methacrylate adhesives. Formulated for use with an activator and mixed at 10:1 ratio. SA10-20A can be used with faster or slower activators; ACT-1B, ACT-2B or ACT-3B to provide working time options from 15 to 30 minutes. It is designed with low boiling tendencies and high strength to adhere to assemblies of thermoset composites and plastics and are formulated to be primerless on most metal surfaces.

AFTC Silvertape™ 5310 is a double sided high performance acrylic based adhesive tape, which is especially designed for a variety of materials with high surface energy like glass, PMMA & PC. This tape is capable of absorbing the different thermal expansions of two materials.

Buehnen Pressure-Sensitive Adhesive D1631.1 is slight color variations can occur with adhesives, depending on the raw materials and processes used. this adhesive is characterized by its high inherent tack and elasticity, as well as good uv resistance. it demonstrates very good adhesive properties to paper, cardboard, wood, textiles, foam, glass, ceramics, metals and many plastics, such as abs, ps, pe, pp, pvc, pmma, pc, petp, pa and pom.

PERMABOND® MT3821 is a 2:1, two-part, modified epoxy adhesive designed for sealing and bonding. It has excellent adhesion to Nylon, ABS, Polycarbonate and other plastics as well as a variety of different metals. When cured, this adhesive is soft and flexible.

Nyatex Adhesive & Chemical Company 20F-VAE Line are low gloss, water borne systems specifically designed to meet the automotive requirements for interior flocked trim in addition to a wide variety of other 3 dimensional substrates including plastics, metals, glass, and foam. This line offers flexible yet tough dry films that work well on soft flexible substrates.

EVA A1537.1 is adhesives are natural products and may vary slightly in color. this adhesive not only exhibits good adhesion to paper and cardboard, but also to many plastics, such as abs, ps, pvc, pc, pe, petp and pmma. the raw materials used comply with fda guideline 175.105 for the outer packaging of food products.

Protex 20VS is a 20 mil latex saturated paper used to protect acrylic windows, canopies and windshields, as well as bare metals and painted surfaces. The paper is vinyl coated on one side and will withstand more abrasion than comparable papers. One of the advantages to Protex 20VS adhesive is if it comes into contact with itself (e.g. if the paper is folded), the product will not block. The two surfaces can be pulled apart without the adhesive being pulled off the paper backing on either side. This will prevent having to dispose of any unusable product.

Buehnen Pressure-Sensitive Adhesive D1544.1 is slight color variations can occur with adhesives, depending on the raw materials and processes used. this adhesive is characterized by a rapid cohesion build-up. it demonstrates very good adhesive properties to paper, cardboard, wood, textiles, foam, glass, ceramics, metals and many plastics, such as abs, ps, pe, pp, pvc, pmma, pc, petp, pa and pom. the raw materials used comply with fda guidelines 175.105 for the outer packaging of food.

Buehnen Pressure-Sensitive Adhesive D1628.1 is slight color variations can occur with adhesives, depending on the raw materials and processes used. particularly suitable for the production of self-adhesive closures for online shipping cartons. this Pressure-Sensitive Adhesive is characterized by a very high surface tack. it demonstrates very good adhesive properties to paper, cardboard, wood, textiles, foam, glass, ceramics, metals and many plastics, such as abs, ps, pe, pp, pvc, pmma, pc, petp, pa and pom.

Technicoll® 9147 is a PUR contact adhesive, sprayable.

Adhesive Films NAF-605 is used in plasticizers and home washapplications.

Technicoll® 8044 is a transparent contact adhesive.

ACRALOCK® SA10-10A is base methacrylate adhesives. Formulated for use with an activator and mixed at 10:1 ratio. The SA10-10A is used for 10 minute, using ACT-1B. ACT-1B, ACT-2B or ACT-3B to provide working time options from 15 to 30 minutes. It is designed with low boiling tendencies and high strength to adhere to assemblies of thermoset composites and plastics and are formulated to be primerless on most metal surfaces.

ACRALOCK® HS1-05BBLK is a activator formulated to be mixed at 1:1 ratio with a single base adhesive, SA1-05A. This methacrylate adhesive combination has improved toughness properties to provide higher tear resistance. It will provide short or medium working time ranges to fit most production assembly requirements. These products are formulated to be primerless on most metal surfaces and will adhere to assemblies of thermoset composites and most plastics.