Products in Ready-to-Use Products: Acrylics, Acrylates & Methacrylates

Electrolube AFA optically clear acrylic conformal coating ideally suited for use as an LED coating or in other commercial applications to protect the PCB from the environment. AFA boasts superb properties, maintaining excellent clarity, with minimal color temperature shift after prolonged UV exposure making it a superb choice for an LED coating application. While it also provides excellent protection in humid environments, and flexibility over a wide operating temperature range.

Orgal® P 062V is Vinyl Acetate-Acrylic Copolymer.

BONDEX® 7500 is an acrylic copolymer pressure sensitive adhesive used for making general purpose permanent label. It has good balance of adhesion and cohesion and displays good pressure sensitive adhesive properties.

Crownmma™ Top Coat 8703 is the premier MMA sealer for direct to concrete. The lower viscosity allows for quick penetration into the concrete for a strong bond and surface reconditioning. The equipment to be used for application are brush &amp

AFA-F is a modified ‘Film Coat’ version of AFA Aromatic Free Acrylic conformal coating. It has been formulated as a ready for use product suitable for selected film coating machines. It is pre-mixed to the correct viscosity to use and does not require any further mixing – eliminating the margin for error involved when the machine operator is required to add solvent.

Orgal® P 526 is a Vinyl Acetate-Vinyl Versatate Copolymer.

BONDEX® OC is based on Acrylic polymer Emulsion. It has very high peel adhesion, extremely soft feel & used mainly for double-sided tissue tapes & for non-porous / non-polar surfaces like HMHDPE plastic in cold weather upto 0ºC temperature. It has excellent tack value, which forms instant bond with non-migrating properties. Ideally suited on labels for round surface plastic containers in cold climate.

Orgal® P 671 is Vinyl Acetate-Acrylic Copolymer.

TS200 is a 25% solids high performance proprietary formulation of 100% pure acrylic polymer resin in a <700 g/L VOC solvent base. It can be used as a curing agent for newly placed concrete or for sealing existing decorative concrete, pavers, or exposed aggregate. TS200 provides durable protection, superior color enhancement, and high gloss “wet look” appearance. It combats freeze/ thaw, restricts water and moisture, limits dirt buildup and stains, retards mold and mildew, blocks efflorescence, increases surface durability, and reduces scaling and spalling. The TS200 can also be used to mitigate dusting on most existing concrete surfaces. It is also UV resistant and nonyellowing. Solvent base allows for superior adhesion. TS200 has a clear appearance. Upon proper application, the substrate will have a “wet look” with high gloss finish when dry. Color tints are available in a selection of colors.

Orgal® P 600 is Vinyl Acetate-Acrylic Copolymer.

APL Acrylic Protective Laquer is a flexible, fast drying acrylic conformal coating used for the protection of electronic circuitry. It has been formulated for professional use only and meets the requirements of a variety of international standards.

Bondex® 2006H is based on Acrylic Terpolymer Emulsion. It has very high peel & excellent tack value, which forms instant bond with non-migrating properties. Due to which the long term durability is better. Excellent for continuous machine application. Bondex® 2006H is a ready to use eco-friendly high peel Adhesives for Label / Stock rolls / PSA Sticker manufacturing.

Orgal® P 808 is Acrylic Copolymer.

AFA-S is a modified version of AFA. This ‘Spray’ grade Aromatic Free Acrylic conformal coating has been formulated for use in atomised spray applicators, and manual HVLP spray guns. AFA-S comes pre-mixed to the correct viscosity for these application methods and is a ‘ready for use’ product without requiring any further mixing by the operator.

TS201 is a 25% solids high performance proprietary formulation of 100% pure acrylic polymer resin in a <350 g/L VOC solvent base. It can be used as a curing agent for newly placed concrete or for sealing existing decorative concrete, pavers, or exposed aggregate. TS201 provides durable protection, superior color enhancement, and high gloss “wet look” appearance. It combats freeze/ thaw, restricts water and moisture, limits dirt buildup and stains, retards mold and mildew, blocks efflorescence, increases surface durability, and reduces scaling and spalling. The TS201 can also be used to mitigate dusting on most existing concrete surfaces. It is also UV resistant and nonyellowing. Solvent base allows for superior adhesion. TS201 has a clear appearance. Upon proper application, the substrate will have a “wet look” with high gloss finish when dry. Color tints are available in a selection of colors.

Orgal® P 050G is Acrylic Copolymer.

AFA-G is a more viscous / gel like version of the successful AFA acrylic conformal coating. It has been designed to be used alongside the other AFA coatings. AFA-G is intended to be dispensed around the base of connectors to act as a permanent masking material. This masking layer will help prevent the capillary flow of material into the connectors, which can cause loss insulation of tabs and loss of connectivity. In addition, the improved resistance to flow of AFA-G can be used to more clearly define difficult keep-out areas during selective coating. . It can also be used to re-enforce sharp edges of critical components which may otherwise be missed by less viscous materials during the coating process.

Orgal® P 6820 is Vinyl Acetate-Acrylic Copolymer.

CrownMMA™ Flex Top 8704 is where thermal shock or high heat resistance or UV resistance is required for area such as kitchen, hot/cold wash down or outdoor poor deck or just outdoor coating. The equipment to be used for application are brush & roller.

CrownMMA™ Base 8702 is the MMA mid layer/ body coat for broadcasting, slurry or self-leveling application for achieving thin to thicker coat and/or resurfacing of spalled concretes. The equipment to be used for application are brush & roller.

Orgal® P 036V is Acrylic Copolymer.

Thermaguard™ TIC 180 is a waterbased, single component, Thermal Insulation Coating (TIC), formulated to provide a seamless weather resistant insulation film which can improve energy efficiency, prevent Corrosion Under Insulation (CUI) occurring, reduce condensation build up & provide personal protection according to ISO 13732-1. The insulation coating acts as a thermal barrier, protecting interior temperatures against cold, warm & humid weather conditions. Can be easily implemented into an inspection program due to the elimination of external cladding therefore, offering a maintenance friendly insulation coating system.

PERMABOND® TA437 is a single component structural acrylic adhesive designed primarily for bonding metals, ferrites and ceramics. The typical fixture time of TA437 when used with Initiator 41 is 20-30 seconds. The fast fixture time of TA437 makes it an ideal adhesive for high speed production lines. When the use of the activator is not desirable, the material will cure anaerobically in a close-fitting joint / in presence of metal, the fixture time will be 5-10 minutes. This product provides high strength, tough, durable bonds with good impact resistance.

PERMABOND® TA436 is a structural acrylic adhesive designed primarily for bonding metals, ferrites, ceramics and some thermoplastics. Permabond TA436 is a no-mix system which obtains handling strength 1-3 minutes when the adhesive and the Initiator 43 come in contact. Permabond TA436 offers high shear and impact resistant bonds and improved high temperature resistance.

Orgal® P 653 is Vinyl Acetate-Acrylic Copolymer.

BONDEX® ACR is based on Acrylic Terpolymer Emulsion. It has very high peel & excellent tack value, which forms instant bond with non-migrating properties. Due to which the long term durability is better. Excellent for continuous machine application. Bondex® ACR is a ready to use eco-friendly high peel Adhesives for Label / Stock rolls / PSA Sticker manufacturing.

AMP-UP™ ACRYLIC Low VOC High Gloss Enamel is a single component, environmentally friendly, and water-based styrenated acrylic enamel designed for interior and exterior industrial and commercial use on adequately primed surfaces. AMP-UP™ ACRYLIC, when used in conjunction with AMP-UPTM products, protects steel, aluminum and concrete in mild to moderate industrial environments. This coating exhibits excellent adhesion, gloss retention, flexibility, and corrosion and UV resistance

Hernon Fusionbond® 378 is a non-sag two component methacrylate adhesive. Fusionbond® 378 is an excellent choice for composite bonding applications in the marine, automotive and construction industries because it requires virtually no surface preparation. Fusionbond® 378 provides superior toughness at temperatures from -40 to 250°F.

Batf Industry BATF-726T is a high performance natural stone.