Products in Ready-to-Use Products: 1K (1 component) Coating

Aquanaut© II Acrylic Enamel is a state of the art, single component, water borne, chemically resistant, acrylic gloss enamel. It can be sprayed, brushed and rolled and has excellent dry fall properties when applied correctly. It has excellent flow & leveling characteristics, long term color & gloss retention and excellent dry fall capabilities. Aquanaut© II does not contain lead or chromates, has very low volatile organic content and is available in a wide variety of colors. Conforms to ANSI/AWWA D102-06, OCS-3.

470 D-TECH™ is the easiest, most economical, permanent solution to problems of contamination and abrasionon existing concrete. More than a sealer, the clear, water-based formula penetrates deeply within concrete to increase the material’s density and hardness from within. It is a ready-to-use, clear, water-based penetrating sealer designed for application to the surface of concrete, above or below grade, interior or exterior.

Void Kote is the Industry Standard Rubberized Coating for void spaces since 1993.

Terraco® Weathercoat 241 is a 1-component polymer modified cementitious capillary crystalline waterproof coating.

HumiSeal® 1B66 is a fast drying, single component, acrylic conformal coating that provides excellent moisture and environmental protection for printed circuit assemblies. HumiSeal® 1B66 demonstrates outstanding flexibility and is easily repaired. HumiSeal® 1B66 coating is RoHS Directive 2002/95/EC compliant.

Blue River Coatings A-6000G is a single component, low VOC, UV resistant clear coat system designed for protection of both newly coated and previously coated substrates when applied to waterborne and select solvent costings. It is designed to coat surfaces that require a hard, flexible, UV resistant coating.

PLT 64 is polypropylene PP non pre treated.

PLT 65 UV is to be used printing on rigid PVC, abs, san, copolymers, polyamide, polycarbonate, mat polystyrene, glossy polystyrene, soft PVC, acrilic glass (casted PMMA), duroplast, glass, ceramics, coated surfaces, PET-A, treated PE, no treated PP, no treated polystyrene.

Truco 4102 Polyurethane Aluminum (Base Coat) is a technologically advanced, high solids, single component, moisture cure polyurethane elastomer coating uniquely formulated for the protection of low slope roofing systems including EPDM, TPO, PVC, Mod. Bit. and BUR surfaces. Once cured, this liquid applied, moisture-curing polymer provides a durable, seamless, flexible, waterproof membrane that resists lateral movement, shear and will allow for normal expansion and contraction. Mil for mil, 4102 provides a greater adhesion and increased protection than similar polyurethane coatings. This product also offers increased resistance to moisture penetration through its lower moisture vapor permeability values. Due to its moisture-cure properties, a longer production window can be achieved during application than acrylic coatings.

METAL-CLAD® ALKYD ENAMEL 4-HES-5446 is a all-purpose, durable utility enamel designed for new construction, industrial maintenance, OEM, and metal fabrication applications. Combines state-of-the-art corrosion protection with excellent gloss retention, superior durability, and onecoat coverage. May be applied direct to metal without a primer. It is used as airless or conventional spray.

Permalac SR is a scratch-resistant, low-VOC, clear top coat.

Rayston PU Zn Primer 1k is a one component polyurethane anticorrosive primer. moisture cured, fast drying, with zinc and micaceous iron (MIO).

ERS-Ecothane Topcoat is a coating system made up of high solids, moisture-catalyzed, single component, polyurethane components. The system consists of ERS-Ecothane Basecoat (an aromatic polyurethane) and ERS-Ecothane Topcoat, a UV-resistant, 100% aliphatic polyurethane. This combination provides an excellent balance of tensile strength, elongation and hardness, resulting in long term flexibility and impact resistance. High abrasion resistance results in protection from maintenance traffic and severe weather conditions. Non-migrating fire retardant chemicals are permanently locked into the coating, ensuring long-term fire retardance. The ERS-Ecothane System is a permanently flexible “breathing” membrane, allowing moisture vapor from within the substrate or building interior to escape though the coating, while remaining impervious to mass water penetration from the exterior. The ERS-Ecothane products are single-component elastomers, which are catalyzed through exposure to moisture in the air. They are designed for application through standard airless spray equipment, as well as by brush or roller.

Consolidated Coatings Phenolic Anti Corrosive Primer Gray (340 VOC) 50-6024 is a heavy duty single part phenolic based alkyd primer with, corrosion resistant properties. use on machinery, piping,, heavy equipment and industrial metal.,.

EasyStreet™ Floor Finish is a One Component Clear Waterbased Wood Floor Finish specifically formulated for Commercial, Residential and Sports Floor applications. EasyStreet provides a completely colorless finish with exceptional durability and chemical resistance without the use of an external catalyst.

PR-99T DARK RED PRIMER is a modified alkyd primer with excellent sprayability.

Roller/Brush Rubber® is a uniquely engineered single component asphalt material that has been modified using the highest quality materials known to us. This Safe To Use, Water-Based, Non-Toxic, Free Of Noxious Odors and Free Of V.O.C.s product is available as a hand-applied or as a spray-applied product that meets and or exceeds all parameters set forth by the EPA.

Coelan® Balcony Finish is a durable topcoat finish with excellent weatherability that provides a UV-resistant, esthetic surfacing for use in the Balcony Coating system.

ROOFDX SUPER™ is a single-component urethane that has been specifically designed as a waterproofing membrane for all types of roofing. It cures to form a tough, elastic, waterproof seal and can be incorporated into roofing specifications that provide 10 to 20 years of roof protection ROOFDX SUPER™ contains corrosion inhibiting pigments that protect metals from rust and acid rain.

Dip Seal Plastics DS-300G belongs to Type I Coatings thats are the most commonly used for corrosion protection. These coatings leave an oil film on the protected part. A relatively hard coating that is excellent for long-term storage and protection from rough handling. Part numbers, UPC codes, etc., can be easily seen through any of the transparent Type One colors. Recommended dipping temperature for all Type One coatings is 350° F. A Transparent coating of approximately 1/16th of an inch thickness. Remains transparent when dry. Excellent corrosion resistance.

Apexior® Number 3® is a single component, easy to apply air cure coating specifically formulated for the waterside corrosion prevention of metal surfaces. It has outstanding wetting properties and adheres well to power-tooled cleaned areas. Apexior Number 3 is resistant to continuous immersion in fresh or salt water as well as frequently wet or high humidity environments. Apexior Number 3 prevents pitting corrosion and stops corrosion which has already begun - except for badly pitted areas. It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of scale buildup. Apexior Number 3 performs ideally with water treatment.

VISCOWRAP ST is an amorphous viscous elastic (viscoelastic) solid polyolefin coating for corrosion prevention of underground and aboveground substrates. VISCOWRAP-ST is part of a 2-layer system that consists of a corrosion protective inner wrap (VISCOWRAP) and mechanical protective outer wrap that can be a PE, PVC or PU composite outer wrap.

Crystal Clear Stone Seal is a medium viscosity coating designed to seal dense floor surfaces such as flagstone, quarry tile, terrazzo, etc. where a low to medium sheen is desired. Fast drying and contains a minimum solids is 18%.

Yincae® UVC 88P is a conformal coating. It is a silver filled, one part epoxy conductive coating for glass and plastic surfaces. It features highly fluorescing, one part, 100% solid, dual cure acrylate polyurethane conformal coatings. They provide excellent chemical resistance, surface hardness, flexibility, and moisture resistance. After cure, these products provide excellent protection for all surfaces against dust, chemicals and harsh environmental factors. They also increase their biocompatibility and ability to retain relatively brilliant fluorescence, allowing coating inspection under UV light. The cure of shadow areas can be accomplished using a secondary heat cure.

senotherm® CLASSIC 1666 is the original classic high temperature resistant coating for easy and smart processing.

F-694 is a fire retardant synthetic rubber coating that exhibits the ultimate in durability and strength in the foam coatings industry. F-694 can be applied to polyethylene, EVA, as well as to many plastics such as ABS. F-694 exhibits excellent abrasion, puncture, moisture and chemicalresistance. Typical applications are foam positioning devices, buoys, sporting goods and padding, packaging, seat cushions, boat and dock bumpers.

Lechler S71090 – S71092 Clipper Interno Scafi 8257 Gray is a 1 Component matt, fast drying, alkyd topcoat suitable for hull interior protection and for painting dunnages, bilges, motor rooms.

Thermaguard™ TIC 400 is a new technology waterbased, single component, inorganic polymeric siloxane matrix, Thermal Insulation Coating (TIC). The insulation coating is formulated to provide a seamless, hydrophobic, weather resistant insulation film. The insulation coating is an inorganic & ultra-low VOC coating. Offering hydrophobicity (moisture resistance), operating temperatures from -60 to 400oC range & exceptional weathering resistance. Thermaguard™ TIC 400 acts as a thermal barrier, which can improve energy efficiency, prevent Corrosion Under Insulation (CUI) occurring, reduce condensation build up & provide personal protection according to ISO 13732-1 (SafeTouch™ properties). Protecting interior temperatures against cold, warm & humid weather conditions. Elimination of external cladding results in a maintenance friendly insulation system for quick inspections. Thermaguard™ TIC 400 has Ultra-High-Build (UHB) capabilities up to 20000 microns DFT in a single multi-pass application. Application at such thicknesses allows use of Thermaguard™ TIC 400 liquid insulation to partly or completely replace use of traditional insulation material systems.

Chemische Industrie Enlargen GmbH CHING SuprAlvite primer coating SAD 182 is quick-drying, low-solvent primer coating on a special polymer resin basis with active corrosion protection for steel and galvanized steel with or without an old coating. It is surface-tolerant also suitable on hand-rusted steel with preparation grade St 2-3.

METAL-CLAD® ALKYD ENAMEL 8-HES-1722 is a all-purpose, durable utility enamel designed for new construction, industrial maintenance, OEM, and metal fabrication applications. Offers state-of-the-art corrosion protection with excellent gloss retention, superior durability, and one-coat coverage. May be applied direct to metal without a primer.

Polinat 5059 pigmented primer provides adhesion of coatings to surfaces of ceramic and marble.

AMP-UP™ PROSHIELD Water-Based FEVE is a single component modified FEVE coating. AMP-UP™ PROSHIELD, when used in conjunction with AMP-UPTM products, protects aluminum, steel, and concrete in mild to moderate industrial environments. This coating exhibits excellent adhesion, gloss and color retention, flexibility, and corrosion and UV resistance

Albi Clad TF + is a water-based intumescent coating designed for the fire protection of interior structural steel.

Evercoat EC-QS is fast set all acrylic elastomeric roof coating.

AteCe Graphic Products B.V. WB2900 is a single side, extended delivery waterbased coating with super high gloss.

HS 300™ Premium Acrylic Sealer is a premium, high-performance, single-component silane, acrylic sealer designed for overlays or other cement-based products. It is vapor permeable and readily applies outside.