Products in Fluids & Lubricants: Oil

POWERSIL® Fluid TR 50 is a fully synthetic silicone fluid that is nonvolatile and noncorrosive. It possesses a high fire point and exhibits virtually self-extinguishing behavior, significantly reducing the fire hazard compared to conventional transformer fluids. This fluid demonstrates exceptional thermal stability, even in the presence of air, enabling higher thermal utilization when compared to other liquid coolants.

Circa 1850® Terra Nova Organic NaturOil is a complex blend of renewable organic food-safe oils. It does not contain any dyes, perfumes or additives. Organic NaturOil is non-toxic and approved for food contact. Contains no nut oils. It naturally nourishes wood and prevents cracking. Terra Nova products are non-toxic and environmentally friendly.

Circa 1850® Tung Oil is a ready to use finish made with raw tung oil, and does not contain any other oils, resins or varnish. Tung Oil, extracted from the nut of the oriental tung tree, has been used for centuries to protect and beautify wood. Circa 1850® Tung Oil penetrates deep into the pores of wood to strengthen the wood fibers. It provides the low-luster,hand-rubbed finish you would expect from a master craftsman. Circa 1850® Tung Oil protects wood from accidental spills and water marks.

Circa 1850® Raw Linseed Oil contains only pure, raw linseed oil, and does not contain any solvents or other additives. Linseed Oil, pressed from the seed of the flax plant, has been used for centuries to protect and beautify wood. Raw Linseed Oil can be used as a finish, or can be mixed with other varnishes or solvents to formulate custom finishes. Circa 1850® Raw Linseed Oil can be used on food preparation surfaces and wood bowls, but Terra Nova NaturOil is recommended for cutting boards and butcher blocks.

Gaudreault Antiques Tung Oil is a ready to use finish made with raw tung oil. It does not contain any other oils, resins or varnish. Tung Oil, extracted from the nut of the oriental tung tree, has been used for centuries to protect and beautify wood. Gaudreault Antiques Tung Oil penetrates into the pores of wood to strengthen the wood fibers. It provides the low-luster, hand-rubbed finish you expect from a master craftsman. Gaudreault Antiques Tung Oil protects wood from accidental spills and water marks.

Circa 1850® Raw Tung Oil contains only raw tung oil, and does not contain any solvents or other additives. Tung Oil, extracted from the nut of the oriental tung tree, has been used for centuries to protect and beautify wood. Circa 1850® 100% Pure Tung Oil can be used as a finish, or can be mixed with other varnishes or solvents to formulate custom finishes. Circa 1850® Raw Tung Oil can be used on food preparation surfaces and wood bowls, but Terra Nova NaturOil is recommended for cutting boards and butcher blocks.

Circa 1850® Double Boiled Linseed Oil contains pure linseed oil that has been gently boiled twice, and does not contain any solvents or other additives. Linseed Oil, pressed from the seed of the flax plant has been used for centuries to protect and beautify wood. Double Boiled Linseed Oil can be used as a finish, or can be mixed with other varnishes or solvents to formulate custom finishes. Circa 1850® Double Boiled Linseed Oil can be used on food preparation surfaces and wood bowls, but Terra Nova NaturOil is recommended for cutting boards and butcher blocks.

Circa 1850® DEX Outdoor Oil is comprised of natural plant oils (tung oil, orange oil, pine oil) and a natural UV-absorber (rutile). Outdoor Oil penetrates deep into the wood fibers to protect and against drying and weathering. Tung oil, a natural oil extracted from the nut of an oriental tree, has been used for centuries to protect and beautify wood. Circa 1850® DEX Outdoor Oil is the ideal finish for exotic (teak, mahogany, ipe) coniferous (cedar, fir, redwood, pine) and deciduous (maple, birch) wood. It protects furniture, decks, woodwork, boats and raised garden beds.

Circa 1850® Lemon Oil Furniture Treatment brings out the natural luster of wood and replaces natural oils which evaporate from wood through age. It does not contain any wax or silicone. Circa 1850® Lemon Oil Furniture Treatment helps to prevent wood from cracking and discoloring. For best results use Circa 1850® Lemon Oil Furniture Treatment once a month to keep wood looking its best.

Circa 1850® Terra Nova NaturOil is a blend of pure oils developed for butcher blocks, salad bowls, cutting boards, wood handles and toys. NaturOil prevents the cracking and drying out of your wood. The non-toxic formula does not contain any dyes, perfumes or other additives. Approved for direct food contact, NaturOil is Kosher and contains no nut oils. Terra Nova products are non-toxic and environmentally friendly.

Circa 1850® Tung'n Teak Oil is a unique blend of tung oil and teak oil. Tung oil, a natural oil extracted from the nut of an oriental tree, has been used for centuries to protect and beautify wood. Teak Oil is commonly used on teak furniture and boats. Circa 1850® Tung'n Teak Oil combines the penetration of teak with the durability of tung oil. It penetrates deep into the pores of wood to strengthen the fibers of the wood while providing a low luster, hand-rubbed finish. Circa 1850® Tung'n Teak Oil is ideal for interior and exterior wood.

Calumet RO15 (ISO 32) line of mineral oils is specifically designed for air conditioning and refrigeration compressors. These mineral oils are refined from high quality specialty base oils using customized hydrotreating process. Calumet R.O. Mineral refrigeration oils are designed to meet OEM requirements and have excellent chemical and thermal stability that support cleaner operation and longer life.

Cutrite 2650 is a semi-synthetic fluid for light to moderate duty machining and grinding of ferrous and non-ferrous alloys. Cutrite 2650’s emulsifier system is designed to remain stable even in very hard water and yet properly balanced to minimize foam in softer water. Cutrite 2650 is a clean product that provides dependable rancidity control when used in machining centers with individual sumps.

CALTRAN™ N60-30 C50A insulating oils are developed using high quality base stocks to deliver a product that provides excellent performance in electrical service. CALTRAN C50 insulating oils are designed and manufactured to provide cooling and insulating properties as well as promote resistance to oxidation and sludge formation.

Hercules EP 2 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 2 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Poseidon 460 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.

Olympus 150 is a anti-wear hydraulic oils formulated with polyalphaolephin synthetic oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics. It is formulated to provide outstanding low- and high-temperature performance and equipment protection up to three times longer than comparable conventional products.

Olympus 220 is a anti-wear hydraulic oils formulated with polyalphaolephin synthetic oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics. It is formulated to provide outstanding low- and high-temperature performance and equipment protection up to three times longer than comparable conventional products.

PROGILINE® Gear 680 PG is a range of polyalkylene glycol based synthetic extreme pressure gear lubricants, providing high levels of load carrying capacity and wear protection. The range is designed to enable continuous operation at high temperature, with minimized friction and good thermal / oxidative stability properties. PROGILINE® Gear PG lubricants allow thermally stable operation at temperatures exceeding 200°C, and offer anticipated service lifetimes of all grades in excess of 10,000 hours at 100°C, enabling extended service intervals and in some instances a fill-for-life lubricant.

Poseidon 32 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.

PROGILINE® Gear 460 PG is a range of polyalkylene glycol based synthetic extreme pressure gear lubricants, providing high levels of load carrying capacity and wear protection. The range is designed to enable continuous operation at high temperature, with minimized friction and good thermal / oxidative stability properties. PROGILINE® Gear PG lubricants allow thermally stable operation at temperatures exceeding 200°C, and offer anticipated service lifetimes of all grades in excess of 10,000 hours at 100°C, enabling extended service intervals and in some instances a fill-for-life lubricant.

Poseidon 320 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.

Synthetic EP 460 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 460 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.

Kixx Compressor P are blended from selected high quality paraffinic base oils. A well balanced additive package provides excellent oxidation resistance, corrosion protection, and outstanding EP characteristics. It provides a smooth, economical compressor operation especially under severe conditions. Range of mineral compressor lubricants, meeting DIN 51 506 class VDL specifications and exhibiting high load carrying capacity.

Biosynthetic® Motor Oil 5W-20 is formulated using advanced additive technology and made from renewable base stocks to help protect your engine and the environment.

Olympus 100 is a anti-wear hydraulic oils formulated with polyalphaolephin synthetic oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics. It is formulated to provide outstanding low- and high-temperature performance and equipment protection up to three times longer than comparable conventional products.

CALTRAN™ 60-08 C50A insulating oils are developed using high quality base stocks to deliver a product that provides excellent performance in electrical service. CALTRAN C50 insulating oils are designed and manufactured to provide cooling and insulating properties as well as promote resistance to oxidation and sludge formation.

Poseidon 100 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.

Cutrite 3012H is formulated for light to moderate machining and grinding of ferrous metals including cast iron. Utilizing synthetic oils, it was engineered to impart maximum cooling and load carrying characteristics. Cutrite 3012H provides long lasting performance in both individual and central systems.

Stearocling 600S Oils is formulated for the sliding ways of machine tools. It is formulated with high viscosity index base stocks combined with special extreme pressure friction modifiers that yield extremely low values in Cincinnati Milacron’s stick-slip test. As a result these oils are more stable to viscosity fluctuations and are able to overcome the slip-stick commonly associated with slow moving parts. Stearocling Way Oils also contain a package that eliminates the possibility of contamination through emulsification between the coolant and the way lube.

CALTRAN™ 60-08 C50B insulating oils are developed using high quality base stocks to deliver a product that provides excellent performance in electrical service. CALTRAN C50 insulating oils are designed and manufactured to provide cooling and insulating properties as well as promote resistance to oxidation and sludge formation.

Cutrite 3398 is a high performance micro emulsion metalworking fluid for machining and grinding of ferrous and non-ferrous alloys including cast aluminum, titanium and nickel-chromium alloys. It is ideally suited for manufacturing plants desiring a single fluid to perform well on a variety of metals and operations. The use of innovative technology allows Cutrite 3398 to provide excellent sump life while the reliable, low maintenance qualities make it an ideal choice for individual sumps and central systems applications.

Hercules EP 1 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 1 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Biosynthetic® Motor Oil 5W-30 is formulated using advanced additive technology and made from renewable base stocks to help protect your engine and the environment.

PROGILINE® Gear 320 PG is a range of polyalkylene glycol based synthetic extreme pressure gear lubricants, providing high levels of load carrying capacity and wear protection. The range is designed to enable continuous operation at high temperature, with minimized friction and good thermal / oxidative stability properties. PROGILINE® Gear PG lubricants allow thermally stable operation at temperatures exceeding 200°C, and offer anticipated service lifetimes of all grades in excess of 10,000 hours at 100°C, enabling extended service intervals and in some instances a fill-for-life lubricant.

Hercules EP 7 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 7 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.