Products in Inks & Pastes: Aluminum

119-07 is a black, pad-printable, one component, high dielectric strength, epoxy ink and coating. This product features excellent adhesion to Kapton, Mylar, aluminum, FR-4 boards, glass and a variety of other substrates. Unlike conventional dielectric materials, this product is very resistant to abrasion, scratching, and thermal aging. Applications for 119-07 include, but are not limited to, high dielectric strength coatings for electrical and electronic devices. 119-07 is designed for pad printing onto contoured surfaces.Features High dielectric strength coating/ink

CG Series pad printing ink is a specialty 2-component pad printing ink formulated for use with glass, ceramics, and metals. In addition, print on plated surfaces, chromed surfaces, hard plastics, epoxy resins, and lacquered surfaces. The printed result appears opaque and has a satin gloss. CG Series pad printing ink for glass offers excellent adhesion, rapid cross-linking, and improved abrasion resistance with a heat cure after printing. CG series ink is dishwasher safe once heat cured.

The Myflex series is a unique and sophisticated blend of polymers that demonstrates unusual toughness, flexibility, adhesion, gloss, and weatherability. The nature of the system requires uncommon solvents to achieve solution. As a result, the printed film has resistance to a variety of solvents and chemicals. Myflex is especially formulated for and has a natural adhesion to raw polyester film such as Mylar.

MB Series pad printing ink is the “go-to” high-gloss 2-component pad printing ink with excellent adhesion, even on difficult substrates. MB Series pad printing ink is an easy-to-use, fast-curing opaque ink series with superior mechanical and chemical resistance to alcohol, acids, and alkali on metals and hard plastics. In addition, MB series will print on metals, painted surfaces, hard plastics, pre-treated polypropylene, polyethylene, acrylics, powder-coated surfaces, and epoxy resins.

127-10 is a fast drying, silver filled ink, designed for producing electrically conductive traces on rigid and flexible circuit boards. This material provides excellent adhesion to aluminum, glass, Mylar, Kapton, and a variety of other substrates. Some additional applications for 127-10 include, but are not limited to, emi/rfi shielding, polymer thick film circuitry, membrane switches and circuit repair.Features Low temp curing, adheres to polycarbonate

Deco-Chem’s Brush Resist is an excellent choice for conventional curing is a temporary protective panel that adheres to metal products. The Brush Resist provides scratch or corrosion protection during manufacturing processes. The dry film is firm and non-tacky. Removal of the Brush Resist can be achieved using commercial concentrations of alkali solutions.

When properly cured, Deco-Chem’s Dry Erase ink becomes a rigid, transparent coating with outstanding chemical resistance. Use dry erase markers to mark the surface and wipe clean with a dry cloth without marring the surface.

Autobond ATB is a class of very high solids polymers that, when baked, yields a very tough, weatherable ink film that can be screen printed or roll coated. When pigmented, the mixture will contain smaller amounts of solvent in certain colors, thereby drastically reducing the VOC’s (Volatile Organic Compounds). This blend of high-tech formulating combined with the best in available raw materials creates “Autobond.”

POL series is a very high solids ink and does not dry out in the screen. It is the best choice for low solvent loss and the finest in environmentally safe products. POL series is a new class of polyester polymers that when baked, yields a duarable weatherable film that can be screen printed and/or roll/coil coated.

Finger prints, food and grime all wipe off easily from an Easy Off surface.

Epoxon is a two component epoxy screen ink formulated specifically for general purpose use on a variety of surfaces. EPO has passed the rigid requirements of the automotive group such as chemical resistance, hardness, flexibility, abrasion resistance and consistency of color.

Autobond For Rollcoat ATB/R is a class of very high solids polymers that, when baked, yields a very tough, weatherable ink film that can be screen printed or roll coated. When pigmented, the mixture will contain smaller amounts of solvent in certain colors, thereby drastically reducing the VOC’s (Volatile Organic Compounds). This blend of high-tech formulating combined with the best in available raw materials creates “Autobond.”

The coarse texture of sand blasted glass can be simulated by applying Deco-Chem’s Beaded Glass Etch ink. The appearance is similar to Simulated Glass Etch, but with bigger particles for a coarser texture. They make glass decorating safer by allowing screen printers to avoid sand blasting or the hazard of using hydrogen fluoride etch solutions.

Metabond is a new class of decorative coating originating from a polyester backbone which is blended with a high quality durable cross-linker. This blend of high tech formulating combines with the best in available raw materials to yield MBI series, the coating with excellent weatherability, chemical resistance, gloss, abrasion resistance and ease of printing.

The coarse texture of sand blasted glass can be simulated by applying Deco-Chem’s Beaded Glass Etch ink. The appearance is similar to Simulated Glass Etch, but with bigger particles for a coarser texture. They make glass decorating safer by allowing screen printers to avoid sand blasting or the hazard of using hydrogen fluoride etch solutions.

4719 Top Coat Clear is a blend of “high tech” polymers specifically synthesized and produced for metal decorating applications. It has been developed to meet new appliance and automotive specifications. It has superior resistance to laundry group detergents and the new generation spot removers.

When properly cured, Deco-Chem’s Dry Erase ink becomes a rigid, transparent coating with outstanding chemical resistance. Use dry erase markers to mark the surface and wipe clean with a dry cloth without marring the surface.

Autobond For Coilcoat ATB/C is a class of very high solids polymers that, when baked, yields a very tough, weatherable ink film that can be screen printed or roll coated. When pigmented, the mixture will contain smaller amounts of solvent in certain colors, thereby drastically reducing the VOC’s (Volatile Organic Compounds). This blend of high-tech formulating combined with the best in available raw materials creates “Autobond.”

Loxon, the “work horse” of the appliance industry, is a blend of high-tech polymers specifically synthesized and produced for metal decorating applications. Loxon has been developed to meet new appliance specifications. It has superior resistance to laundry group detergents and new generation spot removers. Loxon has passed virtually all other chemical resistance tests called for in the appliance industry.

Metaflex is a coating developed for the appliance and metal decorating industries. Deco-Chem has combined the best in high quality raw materials to yield Metaflex, an ink with outstanding stain resistance, durability, and drawability. Metaflex is an excellent choice for markets such as the appliance industry, interior and exterior signage and nameplates. Metaflex is recommended especially for applications which require outstanding flexibility, drawability, and weatherability.

Jänecke+Schneemann Druckfarben FL Ink Group 1/D/IPA is specially developed for the Russian market for printing on outer packages in flexo and gravure printing. It is a solvent-based ink system for surface printing on outer packaging.

Jänecke+Schneemann Druckfarben Ink Group 1/IT/U is a solvent-based universal ink system for printing on packaging's. The Masterbatch system was specially developed for laminating and surface printing applications for food packaging in flexo and gravure printing.

Kor-Chem Jet Spray Inks Series are permanent inks for the metal marking industry. These fast drying inks may be spray applied and allow for fast production speeds with minimal handling.

PLT4 is particularly suitable for acetates cellulose, mylar, treated PETG , trated polyacetal (duroplast), polyamide, treated polyester, treated PE and PP, polyurethane, aminoplast resins, epoxy resins, phenolic resins, lacquered surfaces, triacetate, aluminum, wood, metal, glass.

Inktec TEC-CO-021 also has electrical performance.

Doneck Euroflex U.K. PAA Euro-Foil is gravure and flexographic printing inks with a mild odor are particularly suitable for the printing of pre-varnished aluminum and are used in particular with protective aluminum lids for food packaging. It ensure smooth processing in printing units, and guarantee the color properties necessary for the end product.

METAL RAPID 7080 Violet 110 is formulated and developed for printing on metal sheets such as Tinplate, TFS and Aluminum (2 pcs and 3 pcs.). Have high color intensity and concentration, available in both Process Set and Base Colors, they are recommended for sheet-fed offset presses equipped with thermal oven lines. Suitable both for in-line and off-line coatings.

METAL RAPID 7080 RS Yellow 050 is formulated and developed for printing on metal sheets such as Tinplate, TFS and Aluminum (2 pcs and 3 pcs.). Have high color intensity and concentration, available in both Process Set and Base Colors, they are recommended for sheet-fed offset presses equipped with thermal oven lines. Suitable both for in-line and off-line coatings.

METAL RAPID 7080 GS Yellow 070 is formulated and developed for printing on metal sheets such as Tinplate, TFS and Aluminum (2 pcs and 3 pcs.). Have high color intensity and concentration, available in both Process Set and Base Colors, they are recommended for sheet-fed offset presses equipped with thermal oven lines. Suitable both for in-line and off-line coatings.

Mara® Glass MGL is a Screen Printing Ink that can be used on glass, ceramics, metal, aluminum, chrome-plated parts, and coated substrates. High gloss, high brilliance, medium opacity, silicone-free, quick-curing 2-component ink.

METAL RAPID 7080 Rubine Red 220 is formulated and developed for printing on metal sheets such as Tinplate, TFS and Aluminum (2 pcs and 3 pcs.). Have high color intensity and concentration, available in both Process Set and Base Colors, they are recommended for sheet-fed offset presses equipped with thermal oven lines. Suitable both for in-line and off-line coatings.

METAL RAPID 7080 Mixing White 140 is formulated and developed for printing on metal sheets such as Tinplate, TFS and Aluminum (2 pcs and 3 pcs.). Have high color intensity and concentration, available in both Process Set and Base Colors, they are recommended for sheet-fed offset presses equipped with thermal oven lines. Suitable both for in-line and off-line coatings.

PLT 34 suitable for ABS, aluminum, coated paper, wood, metal, mylar, treated PETG, treated polyacetal (duroplast), polycarbonate, treated PE PP polyester, polymethacrylate, polystyrene, polyurethane, self adhesive pvc, hard pvc, lacquered surfaces.

METAL RAPID 7080 Orange 040 is formulated and developed for printing on metal sheets such as Tinplate, TFS and Aluminum (2 pcs and 3 pcs.). Have high color intensity and concentration, available in both Process Set and Base Colors, they are recommended for sheet-fed offset presses equipped with thermal oven lines. Suitable both for in-line and off-line coatings.

Encres Dubuit Graphicard series is a solvent based screen printing ink which is suitable for printing on metal objects.

Mara® Tech MGO is a baking ink for glass and metal. High gloss, high opacity, single component ink system, highly chemical-resistant screen and pad printing ink.