Products in Base Coats & Undercoats

Domacryl 9948 is a reactive 2-pack methacrylate resin, hardened with dibenzoyl peroxide designed for flooring. The resin is suitable for mortar, self-leveling, smooth and broadcasted floor coatings. Features and BenefitsFlexible base coat for flooring systemsVery fast curing even at low temperaturesLow VOCApplication with trowels or rollers.

ME-565 broadband electrically conductive isolation coating is a carbon-based paint in a proprietary water based acrylic resin system. It provides broadband RFID area isolation across all RFID frequencies in a thin, easy to apply format. Its durable abrasion resistant finish is stable in hot and cold environments. The product can be applied with a brush, roller or sprayed on. It has excellent UV and fire resistance. This product can be applied to various surfaces including but not limited to sheetrock, wood and metal. ME-565 acts as a ground plane which can be used as an undercoating in conjunction with our MF-500 Urethane MagRAM RF absorbing coating.

ME-505 broadband Electrical isolation coating is a coated carbon based paint in a proprietary urethane (solvent based) resin. It provides broadband RF isolation in a thin format. Its durable abrasion resistant finish is stable in hot and cold environments. The product can be applied with a brush or sprayer or screen printed. It has excellent UV and fire resistance. This product can be applied to various surfaces including but not limited to sheetrock, wood and metal. ME-505 is a lossy ground plane which can be used as an undercoating in conjunction with our MF-500 Urethane MagRAM RF absorbing coating.

DeVere Chemical Ultra Kote is a superior, metal cross-linked floor finish with 18% solids. It is designed to meet today’s demands for fast drying, high gloss, and low maintenance finishes. Ultra Kote is designed to be buffed once a week or less. Choose this product for super hardness, high wet-look gloss, durability, and slip resistance.

Vapor-Guard R5341B is a water-based coating designed for corrugated board liners and other paper-based substrates. It can be used for any packaging application that requires excellent water resistance, and a low rate of moisture vapor transmission (MVTR).

Kemperol® 022 is a two-component, high performance, cold-liquid applied, solvent-free, low VOC, crack-spanning resin for waterproofing beneath tile and stone applications.

ChemSystems Cemseal WB is a high quality pure acrylic water-based sealer designed to protect both interior and exterior concrete and masonry surfaces. CemSeal WB forms a tough water clear semi-gloss protective acrylic film that resists water, dirt and common day-to-day contamination at the same time eliminating concrete dusting. This product is a good choice for sealing all types of gray or colored concrete and masonry surfaces. It can be tinted using Helix water-based Tint Packs to achieve a translucent tinted sealer.

Colorfast™ strengthens the glue that binds the wood cells together, called lignin, preventing yellowing of the underlying wood cells to help maintain a consistent color year after year. Before staining, Colorfast™ evens out wood porosity, creating a smoother surface for stain application and preventing over-absorption and a too-dark color. After staining, the lignin stabilizers prevent the wood underneath from getting sunburned, leaving the stain applied on top looking the same year after year. Colorfast delivers the ideal canvas for stain application and leaves behind the strong foundation necessary for long-lasting color.

ELASTA-TUFF 5000 is a single component, liquid applied, high adhesion, moisture cured polyurethane waterproofing coating. It is used as the First Coat or Base Coat for most of the polyurethane deck and roof coating systems supplied by TUFFLEX Polymers. ELASTATUFF 5000 is used in those areas where a low VOC, medium solvent containing base coat is desired.

Arma 102 is a high solids, moisture-catalyzed, single-component polyurethane coating system. It consists of Arma101, an aromatic polyurethane basecoat, and ARMA 103, a UV-resistant, 100% aliphatic polyurethane topcoat. This product is effective as a protective membrane over polyurethane foam on new or existing roofs and hot or ambient storage tanks.

Tech Line Coatings Black High Heat Base Coat (HHBK) is a metallic ceramic coating capable of providing extremely high levels of thermal protection in very thin films. When applied to exhaust systems HHBK will withstand substrate temperatures of over 2000°F. in addition direct flame will not cause delamination as long as substrate temperatures do not exceed this temperature. Due to its unique ceramic nature, the coating also functions as a very effective thermal barrier, with reduced thermal radiation characteristics.

UREA-TUFF 4260 is a two-component, liquid-applied hybrid polyurea elastomer designed for use as a mix-in-the-bucket, but yet rapid-curing, monolithic waterproofing membrane. is a solvent-free aromatic polyurea-polyurethane elastomer containing no tar or asphaltic extenders.

Geomet® 720 is a completely chrome-free, water-based coating passivated with zinc and aluminum flakes in a binder. This high-performance, low-film, functional zinc flake coating is designed to protect fasteners, stampings, and a variety of metallic hardware. Geomet® 720 is the preferred zinc flake coating widely used by Asian OEMs.

PREP COAT NCP, Non-cementitious Prep Coat, is formulated with a 100% styrene acrylic emulsion. It is a trowelapplied high performance coating for use as an optional base coat on the DuROCK PUCCS RMC and InsulROCK RMC Systems, as well as the DuROCK Exterior Finish Systems. NCP is a factory-mixed base coat that does not require the addition of water or Portland cement. NCP is normally used only as a base coat on combustible construction. However, on existing EIFS installations where it may be necessary to re-finish the system, NCP is recommended for skimming over-top of existing EIFS finish coats to level the surface prior to application of a new DuROCK Finish. NCP is a flexible and durable base coat that has greater flexibility than polymer based cement base coats, hence, it is ideal for areas where greater flexibility may be required. When used as a skim coat, it is intended to be applied very tight.

EPL™ 9 is a 100% pure, slow set, self-leveling elastomer.

Royal Deck Lite Screed is Low-density solyent-free epoxy compound for leveling off internal and external decks on ships.

Barvy A Laky Formex Zinc Base S2003 is a basic synthetic anti-corrosion coating for metal.

Trans4loor™ Metallic is a two-component, solvent-free, epoxy/amine system designed specifically for applications over concrete floors and countertops where maximum durability and chemical resistance are required within a decorative metallic system. This high gloss material is available in a solid color base coat and a clear formula where metallic pigments are added.

ArmorPrime Ultra-Fast (727) is a straw/clear 100% solids two component epoxy specifically formulated to be used as both a primer and/or a base coat. ARMORPRIME ULTRA-FAST has been specifically formulated to cure very rapidly. Due to the low viscosity of this product, it is an ideal choice to adhere to concrete creating a tenacious bond. This product can be applied as a “neat” coat, or can be mixed with aggregates such as fine mixed silica to aid in filling in rough or uneven substrates. ArmorPrime Ultra-Fast #727 has been designed for interior use only.

Arma 101 is a high solids, moisture-catalyzed, single-component polyurethane coating system. It consists of Arma101, an aromatic polyurethane basecoat, and ARMA 103, a UV-resistant, 100% aliphatic polyurethane topcoat. This product is effective as a protective membrane over polyurethane foam on new or existing roofs and hot or ambient storage tanks.

Daily Polymer AC-5091 is ultra fast drying, excellent resistance, good hardness, aromatic solvent free and yellowing resistance clear coat.

Red Spot Paint & Varnish Co. UVB315 is UV cure basecoat for metallizing Nylon, PBT, PC, PC/ABS, PET/PBT and PPO substrate.

PolyBrite® 71-HS is a high solid, premium grade water-based elastomeric coating. This proprietary formulation uses 100% acrylic resin cures to form a seamless fluid applied roof membrane. It offers the unique ability to extend the life of a roofing system, lower overall life cycle costs, and provides excellent bleed-through resistance. When applied in white, it is highly reflective keeping the roof surface cool and providing protection from UV and other weather exposures.

Red Spot Paint & Varnish Co. 467WK/470W is thermal cure monocoat with PP substrate.

Tech Line Coatings MCS is a metallic ceramic coating designed as an insulating coating. It is to be used either a a base coat on the OD or as a stand alone coating on the ID. MCS is capable of handling temperatures over 2000°F. MCS does not have good corrosion characteristics and should not be used as an OD coating only. MCS is unaffected by most chemicals. Requires a 500°F cure.

PREP COAT Q is a fast drying, dry polymer based dry-mix material that is field-mixed with water. It is ideal for use in cold temperature, high humidity conditions. It is a trowel-applied high performance coating for use on DuROCK PUCCS and InsulROCK Systems as a non-combustible base coat and adhesive. Prep Coat Q is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, breathable to water vapor and non-combustible. It is a convenient product since it requires only water to be added on site.

Automotive International VG-160 Military Spec Solvent Undercoating is a high performance solvent-based wax-based coating for inner body panels and/or the underside of automotive vehicles, bus bodies, motor homes, and other similar structures. It provides a waxy flexible and abrasion-resistant coating for superior corrosion protection against moisture, salt, alkalis, and galvanic reaction.

Geomet® 430 is a black appearance basecoat applied to protect fasteners and various types of metallic parts from corrosion. Geomet 430 is always combined with nof metal coatings group black topcoats (plus or P-series) to provide a very broad range of friction coefficients. This new black-on-black system with geomet 430 will enhance cosmetic appearance even after mechanical damage and automatic sorting.

PREP COAT PLUS is 100% styrene acrylic emulsion that is field-mixed with Portland cement. It is a trowel-applied high performance coating for use on DuROCK PUCCS RMC and InsulROCK RMC Systems as a base coat and adhesive with enhanced flexibility and strength. Prep Coat Plus is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, and breathable to water vapor. Prep Coat Plus can be applied as a high-build leveling coat, for added impact resistance on EIFS or to make a wall plumb and flat, applied up to 6.4 mm (¼ inch) thick in a single pass if required.

Red Spot Paint & Varnish Co. UVB393V is UV cure basecoat for metallizing BMC, Nylon, PBT, PC/ABS and PET/PBT substrate.

Tique Ground Coat is an elastomeric weather resistive air barrier, adhesive and base coat combined with Portland Cement. Tique Ground Coat is used in the Tique Continuous Insulation Systems, as well as in the direct applied application on vertical wall assemblies. It is a two component product.

Kemperol® BRM is a two-component including catalyst, high performance seamless and self-terminating cold-liquid applied, reinforced unsaturated polyester membrane system for exterior applications.

Skim-kote is a polymer modified cement base coat and surface leveler.

Monochem 45 is a two-component, high solids, self-leveling epoxy-cycloaliphatic amine. For added decorative and safety options, you can broadcast plastic chips, color micas, metallic pigments, color quartz, silica sand and other aggregates. It is designed as a high performance primer, base or interior top coat.

Red Spot Paint & Varnish Co. 396W is thermal cure monocoat with ABS, PC and PC Blends substrates.

DISSCO® 521 Premium Grade Non-Fibered Foundation Coating is a non-fibered asphalt base coating designed for use as a below grade foundation damp-proofing for applications where a high-water content or hydro-static pressure is not present. It is designed to prevent moisture and/or dampness that may naturally be present in the soil from penetrating a foundation wall providing corrosion protection and preventing the damp or musty feeling common to many basements. For applications where a high moisture content, hydrostatic head or high-water table is present it is recommended to upgrade to a true waterproofing compound. It will adhere to almost any material such as concrete, masonry block, wood, steel, plastic, and many other surfaces.