Products results

WACKER® Catalyst C 05 is a highly active, diluted platinum catalyst specifically designed for the thermal curing of solvent-based and solvent-free addition-crosslinking silicones. It exhibits very high and constant catalyst activity, making it ideal for use in automated mixing units. This catalyst enables rapid curing of addition-crosslinking silicone systems, providing efficient and reliable results. Additionally, WACKER® Catalyst C 05 is miscible with silicones in all proportions.

ELASTOSIL® E41 Transparent is a flowable, one-component silicone rubber with excellent mechanical properties that cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties and has good adhesion properties to many substrates, in particular cured silicone rubber.

GENIOSIL® STP-E 10 is a polyether-based silane-terminated polymer suitable as a binder in moisture-curing formulations. It differs from conventional silylated polymers due to its high reactivity, which results from the structural proximity of the nitrogen atom to the silicon atom in the dimethoxy(methyl)silyl-methylcarbamate group (alpha-effect). It hydrolyzes in the presence of moisture to form a stable siloxane network initiated by mild catalysis, rather than heavy metal ions.

ELASTOSIL® N9111 White is a non-slump, non-corossive, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. It is a multipurpose sealant and adhesive for the appliance, automotive, and electronics industries. Due to its shear-thinning nature, ELASTOSIL® N9111 White is easy to apply. The material starts curing upon contact with air humidity.

DEHESIVE® 929 is a solvent-free, addition-curing silicone fluid designed for release applications. This product has good curing properties, very good flow properties and coverage, an extremely stable release, excellent bath life, and excellent long-term anchorage to a wide variety of substrates.

ELASTOSIL® N189 Black is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates and has good resistance to mineral oil and coolants. Additionally, it shows excellent heat stability.

VINNAPAS® eco EP 400 is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. This product exhibits good adhesion to various plastic surfaces, allowing for the creation of permanently flexible adhesive joints. Additionally, it offers high cohesion, ensuring strong bonding properties.

VINNAPAS® eco CA 55 is an environmentally conscious product that helps conserve fossil resources. When purchasing this product, it is possible to replace up to 100% of the fossil-based raw materials used in its manufacturing with sustainably certified renewable feedstock. This substitution process follows the REDcert² mass balance approach, which is audited by TÜV Nord. The specific amount of fossil raw material replaced depends on the chosen product version and is specified in the REDcert² certificate.

HDK® H2000 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H2000 is primarily used as a reinforcing filler in silicone-elastomers, enhancing their properties. Furthermore, it serves as a free flow additive in the production of technical powders and finds application as an additive in antifoam agents.

ELASTOSIL® N10 Transparent is a solvent-free, neutral-cure, low-viscous, and non-thixotropic silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates. It is a multipurpose grade for bonding, sealing, and potting, e.g. in electronic applications.

VINNAPAS® CA 5588 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium-firm hand is required. The dispersion combines a very high solid content with a low viscosity—a combination that permits the addition of very high filler loadings, resulting in adhesive formulations with high solid contents of 80 percent or even greater. VINNAPAS® CA 5588 is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

VINNAPAS® EP 1 is a plasticizer-free polymer dispersion based on vinyl acetate and ethylene monomers. It exhibits good adhesion to various plastic surfaces, providing a permanently flexible glue line. It is particularly suitable for applications such as adhesives for paper packaging and PVC furniture foil adhesives.

ELASTOSIL® E43 Transparent is a self-leveling, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties and has good adhesion properties to many substrates. In particular, it is used as adhesive on cured silicone rubber.

VINNAPAS® EP 400 is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. It exhibits good adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints with high cohesion. It is suitable for a range of applications, including adhesives for paper packaging and PVC furniture foil adhesives.

ELASTOSIL® A33 Ivory is a moisture-curing silicone rubber (RTV-1) that does not slump and cures at room temperature. It releases an organic amine during the vulcanization process. ELASTOSIL® A33 demonstrates excellent primerless adhesion to a wide range of substrates. This multipurpose grade is suitable for sealing and bonding applications, offering resistance to high temperatures and contact with oil.

ELASTOSIL N199 TRANSPARENT is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. ELASTOSIL® N199 Transparent exhibits excellent primerless adhesion to many substrates with high tear strength. It is a multipurpose adhesive and sealant for the electronics industry, with typical uses for CIPG- and FIPG-applications.

WACKER® Catalyst OL is a highly active and concentrated platinum catalyst specifically developed for the thermal curing of solvent-based and solvent-free addition-crosslinking silicones. This catalyst exhibits exceptional and consistent activity, providing rapid curing for addition-crosslinking silicone systems. With its high concentration of platinum, it offers efficient performance. Moreover, it is miscible with silicones in any proportion.

ELASTOSIL® E4 is a non-slump, acetoxy-cure, one-component silicone rubber that cures at room temperature under the influence of atmospheric moisture. It exhibits good heat stability, with permanent temperatures up to 180°C and peak temperatures up to 200°C. This product has excellent primerless adhesion to many substrates.

ELASTOSIL® E43 Black is a self-leveling, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties and has good adhesion properties to many substrates. In particular used as adhesive on cured silicone rubber.

VINNAPAS® eco CA 5880 is a sustainable solution that promotes the conservation of fossil resources by enabling the substitution of fossil-based raw materials with certified sustainable renewable feedstock. This substitution process adheres to the REDcert² mass balance approach and is independently audited by a third party. The precise amount of fossil raw material replaced varies depending on the specific product version and is documented in the corresponding certificate.

ELASTOSIL® N 2199 is a one-part, ready-to-use, acid- and solvent-free, non-corrosive RTV-1 non-slumping paste that cures at room temperature to a permanently flexible silicone rubber on exposure to atmospheric moisture. It shows excellent adhesion to a broad variety of substrates.

ELASTOSIL® E14 Red is a non-sag acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It meets the physical requirements of MIL-A-46106, Group I, Type I, and Group III, Type I.

DEHESIVE® 902 AMA® is a solvent-free, addition-curing silicone fluid formulated for release applications on paper and filmic substrates. It is an integral component of a multicomponent release coating used in the production of paper and filmic release liners. These liners are widely utilized in the manufacturing of single- and double-sided industrial laminates.

ELASTOSIL® N 2034 is a self-leveling, alkoxy-cure, one-component silicone sealant that cures at room temperature under the influence of moisture. It shows excellent primerless adhesion to many substrates. This product is flame retardant and meets the UL 94 V-0 standards.

ELASTOSIL® N 2010 is a self-leveling, one-component silicone sealant that cures at room temperature under the influence of moisture. It is a ready-to-use, acid- and solvent-free, non-corrosive RTV-1 (room temperature vulcanizing, 1-component) silicone rubber suitable for many applications. It exhibits good adhesion to plastics and metals, along with elasticity and durability, making it suitable for a wide range of potential uses.

DEHESIVE® 944 is a solvent-based, addition-crosslinkable silicone recommended for use as a release coating. It offers excellent release stability, medium release at low peel speeds, excellent bath life, and excellent anchorage to a wide variety of substrates. It can be used for coating polyester films (PET), papers, and PE-laminated papers.

ELASTOSIL® A234 White is a flowable RTV-1 silicone rubber that cures at room temperature under the influence of moisture. It shows excellent primerless adhesion to many substrates and offers outstanding heat stability. It is a multipurpose grade for high-temperature applications. Suitable for sealing and bonding, such as the bonding of steam chambers and sole plates of steam irons,

ELASTOSIL® N288 is a low-viscosity, ready-to-use, neutral crosslinking silicone rubber. It cures at room temperature under the influence of atmospheric moisture. It exhibits excellent heat stability, excellent primerless adhesion to many substrates, permanent temperature exposure up to 200 °C, and peak temperatures up to 250°C.

ELASTOSIL® E70 is a flowable, one-component, acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It is a high-temperature-resistant grade for sealing and bonding applications under high thermal stress.

ELASTOSIL® N9111 Grey is a non-slump, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. Due to its shear-thinning nature, this product is easy to apply. The material starts curing upon contact with air humidity. It shows excellent primerless adhesion to many substrates, like glass, aluminum, stainless steel, PA, and PBT.

ELASTOSIL® E47 Transparent is a non-slump, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows particularly excellent adhesion to cured silicone elastomers. Vulcanization can be accelerated by elevated temperatures (up to 80°C).

CARBOWET® GA-100 is a surfactant meticulously crafted through the optimal blend of non-ionic additives. Its purpose is to offer multifaceted advantages in various aqueous formulations, including wetting, stabilization, and compatibilization. This remarkable surfactant excels in providing exceptional low-foam pigment wetting and milling efficiency, all without the typical issues related to water sensitivity, foam generation, and rheological problems commonly associated with APE surfactants. The versatility of CARBOWET® GA-100 extends its performance to a wide spectrum of applications and formulations, where its dynamic wetting capabilities combined with compatibilization and stabilization can yield unique benefits. Importantly, CARBOWET® GA-100 is formulated without added APEs or solvents, making it an easily incorporable liquid additive. Notably, it shines brightest in architectural paint mills, where it delivers its peak performance. 2

Evonik Polymer VS 500 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

VISIOMER® 1,6-HDDMA (1,6-hexanediol dimethacrylate) is a hydrophobic dimethacrylate monomer highly suitable as a crosslinker for reactive systems. This versatile monomer finds applications in industries such as 3D printing, adhesives and sealants, coatings, as well as plastics and rubber.

AEROSIL® R 106 is a hydrophobic fumed silica after treated with D4 (Octamethylcyclotetrasiloxane).

VISIOMER® TMPTMA (trimethylol propane trimethacrylate) is a trifunctional methacrylate monomer renowned for its ability to serve as a crosslinking agent. It imparts cohesive strength and high temperature resistance to polymers and elastomers by forming dense networks. This versatile monomer finds applications in industries such as 3D printing, adhesives and sealants, coatings, construction, as well as plastics and rubber.