Products results

VINNAPAS® EP 701K is a polymer dispersion based on vinyl acetate and ethylene. It offers excellent elongation, water resistance, and flexibility. This dispersion also demonstrates outstanding adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints and high adhesion.

VINNAPAS® eco EP 400 is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. This product exhibits good adhesion to various plastic surfaces, allowing for the creation of permanently flexible adhesive joints. Additionally, it offers high cohesion, ensuring strong bonding properties.

ELASTOSIL® N 2199 is a one-part, ready-to-use, acid- and solvent-free, non-corrosive RTV-1 non-slumping paste that cures at room temperature to a permanently flexible silicone rubber on exposure to atmospheric moisture. It shows excellent adhesion to a broad variety of substrates.

Wacker Chemie Crosslinker BO 30 is a mixture consisting of various ketoximosilanes. It is a colorless to yellow liquid that is not miscible with water. When exposed to water or moisture, it decomposes and forms methylethylketoxime. This crosslinker is primarily used as a special raw material for silicone compounding applications.

VINNAPAS® 315 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol. It possesses a glass transition temperature (Tg) of +17 °C, which contributes to its exceptional heat resistance and high tensile strength. Specifically formulated as a base for high-speed packaging adhesives, VINNAPAS® 315 demonstrates remarkable wet tack and thickening responses. Its poly(vinyl alcohol) stabilization and impressive mechanical stability ensure smooth machining and enable its utilization in various roll, extruder, or spray applications.

VINNAPAS® eco CA 5880 is a sustainable solution that promotes the conservation of fossil resources by enabling the substitution of fossil-based raw materials with certified sustainable renewable feedstock. This substitution process adheres to the REDcert² mass balance approach and is independently audited by a third party. The precise amount of fossil raw material replaced varies depending on the specific product version and is documented in the corresponding certificate.

WACKER® Polymer FD 350 is a hydroxyfunctional polydimethylsiloxane polymer. It is a colorless, clear, and odorless liquid that is not miscible with water. It is recommended for use in a variety of processing and formulating applications such as sealants, adhesives, coatings, softeners (textile), and mold-making products.

ELASTOSIL® E14 Red is a non-sag acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It meets the physical requirements of MIL-A-46106, Group I, Type I, and Group III, Type I.

ELASTOSIL® E43 Black is a self-leveling, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties and has good adhesion properties to many substrates. In particular used as adhesive on cured silicone rubber.

ELASTOSIL® E4 is a non-slump, acetoxy-cure, one-component silicone rubber that cures at room temperature under the influence of atmospheric moisture. It exhibits good heat stability, with permanent temperatures up to 180°C and peak temperatures up to 200°C. This product has excellent primerless adhesion to many substrates.

WACKER® Catalyst OL is a highly active and concentrated platinum catalyst specifically developed for the thermal curing of solvent-based and solvent-free addition-crosslinking silicones. This catalyst exhibits exceptional and consistent activity, providing rapid curing for addition-crosslinking silicone systems. With its high concentration of platinum, it offers efficient performance. Moreover, it is miscible with silicones in any proportion.

VINNAPAS® EP 706K (ULS) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, providing improved adhesion to films like polyvinyl chloride. Additionally, VINNAPAS® EP 706K (ULS) demonstrates very high plasticizer and solvent viscosity thickening responses.

VINNAPAS® EP 1 is a plasticizer-free polymer dispersion based on vinyl acetate and ethylene monomers. It exhibits good adhesion to various plastic surfaces, providing a permanently flexible glue line. It is particularly suitable for applications such as adhesives for paper packaging and PVC furniture foil adhesives.

WACKER® Crosslinker ALX is a mixture of alkoxy- and aminosilanes. It is a colorless to slightly yellow liquid that can appear clear or slightly turbid. It is partially miscible with water but decomposes when exposed to water or moisture, resulting in the formation of alcohols and a silicone resin. WACKER® Crosslinker ALX serves as a raw material for the production of alkoxy-cured RTV-1 silicone rubbers.

ELASTOSIL® E43 Transparent is a self-leveling, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties and has good adhesion properties to many substrates. In particular, it is used as adhesive on cured silicone rubber.

VINNAPAS® EP 400 is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. It exhibits good adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints with high cohesion. It is suitable for a range of applications, including adhesives for paper packaging and PVC furniture foil adhesives.

VINNAPAS® EN 421 is an aqueous, self-crosslinking copolymer dispersion of vinyl acetate and ethylene, manufactured without the use of alkyl phenol ethoxylate (APEO)-based materials. It is particularly suitable for formulating heat-curing or self-curing adhesives. This dispersion offers the softness and flexibility typical of a vinyl acetate-ethylene copolymer adhesive base.

VINNAPAS® 401 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol and has a glass transition temperature (Tg) of -15 °C. It is specifically formulated to provide easy clean-up, extended open time, and exceptional film flexibility. VINNAPAS® 401 is commonly used as a base for adhesives, offering a well-rounded combination of excellent wet tack, fast setting, strong adhesion, and heat resistance.

VINNAPAS® EP 707K (ULS) offers excellent elongation, water resistance, and flexibility. It features the fastest setting speed among the VINNAPAS® EP product lines. Thanks to its low viscosity and rapid setting speed, VINNAPAS® EP 707K (ULS) is highly suitable for high-speed packaging machine applications.

WACKER® Polymer FD 6 is a colorless, clear, and odorless liquid that is not miscible with water. It is used as a raw material for the production of RTV-1 silicone rubbers. This product is specifically designed for use in sealants and silicone sealants, serving as a special raw material for silicone compounding.

ELASTOSIL N199 TRANSPARENT is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. ELASTOSIL® N199 Transparent exhibits excellent primerless adhesion to many substrates with high tear strength. It is a multipurpose adhesive and sealant for the electronics industry, with typical uses for CIPG- and FIPG-applications.

ELASTOSIL® A33 Ivory is a moisture-curing silicone rubber (RTV-1) that does not slump and cures at room temperature. It releases an organic amine during the vulcanization process. ELASTOSIL® A33 demonstrates excellent primerless adhesion to a wide range of substrates. This multipurpose grade is suitable for sealing and bonding applications, offering resistance to high temperatures and contact with oil.

VINNAPAS® CA 5588 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium-firm hand is required. The dispersion combines a very high solid content with a low viscosity—a combination that permits the addition of very high filler loadings, resulting in adhesive formulations with high solid contents of 80 percent or even greater. VINNAPAS® CA 5588 is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

VINNAPAS® 920 is a carboxylated, poly(vinyl alcohol) stabilized, vinyl acetate-ethylene (VAE) copolymer dispersion with a glass transition temperature (Tg) of -20 °C. It offers excellent flow, wetting, and adhesion to a wide variety of polymeric films, coatings, and other difficult substrates.

VINNAPAS® EP 4600 is a vinyl acetate-ethylene (VAE) copolymer dispersion stabilized with polyvinyl alcohol. It possesses a glass transition temperature (Tg) of +5°C. This dispersion was specifically formulated to have a low viscosity and high solids content, allowing it to accommodate high levels of fillers.

DEHESIVE® 902 AMA® is a solvent-free, addition-curing silicone fluid formulated for release applications on paper and filmic substrates. It is an integral component of a multicomponent release coating used in the production of paper and filmic release liners. These liners are widely utilized in the manufacturing of single- and double-sided industrial laminates.

VINNAPAS® EP 708 (NJG) is a high-viscosity vinyl acetate-ethylene copolymer dispersion. It demonstrates excellent machinability and strong wet tack. Additionally, it offers enhanced adhesion to films, including polyvinyl chloride. VINNAPAS® EP 708 (NJG) is chemically stable at both high and low pH. It has very high plasticizer and solvent viscosity thickening responses. It is compatible with an assortment of resins, solvents, plasticizers, and other modifiers, as well as the other VINNAPAS® EP dispersions.

GENIOSIL® GF 80 is an epoxy functional alkoxysilane. When used as a coupling agent in mineral-filled plastics, it enhances filler dispersibility, reduces sedimentation tendency, and significantly lowers the resin's viscosity. Moreover, it allows for higher filler loading and provides notable improvements in water (vapor) resistance, as well as resistance to acids and bases. In the realm of adhesives and sealants, incorporating GENIOSIL® GF 80 enhances adhesion to the substrate and improves mechanical properties like flexural strength, tensile strength, and modulus of elasticity.

WACKER® Crosslinker ME 60 is a mixture of alkoxysilane and aminofunctional siloxane. It appears as a colorless to yellow liquid, clear to slightly turbid, and is partially miscible with water. When exposed to water or moisture, it decomposes and forms methanol and a silicone resin. WACKER® Crosslinker ME 60 is utilized as a raw material for the production of alkoxy-cured RTV-1 silicone rubbers.

ELASTOSIL® N 2034 is a self-leveling, alkoxy-cure, one-component silicone sealant that cures at room temperature under the influence of moisture. It shows excellent primerless adhesion to many substrates. This product is flame retardant and meets the UL 94 V-0 standards.

VINNAPAS® EP 6300 is a high-solids vinyl acetate-ethylene (VAE) copolymer dispersion with carboxylation. It has a glass transition temperature (Tg) of 0°C. This dispersion exhibits excellent adhesion to films and metals, and it also offers impressive cohesive film strength. Furthermore, it has the ability to be crosslinked.

ELASTOSIL® N189 Black is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates and has good resistance to mineral oil and coolants. Additionally, it shows excellent heat stability.

VINNAPAS® EP 760 is a unique rapid-setting vinyl acetate-ethylene copolymer dispersion. It stands out as more than just a high-solids version of the VINNAPAS® EP series. This polymer exhibits exceptional adhesion to challenging substrates that are typically difficult to bond, such as polyester, polyethylene terephthalate, tempered aluminum foil, and polystyrene.

ELASTOSIL® A234 White is a flowable RTV-1 silicone rubber that cures at room temperature under the influence of moisture. It shows excellent primerless adhesion to many substrates and offers outstanding heat stability. It is a multipurpose grade for high-temperature applications. Suitable for sealing and bonding, such as the bonding of steam chambers and sole plates of steam irons,

WACKER® Crosslinker V 90 is a solvent-free hydrogenpolysiloxane containing reactive Si-H groups. It is known for its fast curing properties, good release stability, and excellent anchorage to a wide variety of substrates. The fast-curing properties of WACKER® Crosslinker V 90 also enable the use of a low platinum concentration.

WACKER® Polymer FD 80 is a colorless, clear, and odorless liquid that is not miscible with water. It is used as a raw material for the production of RTV-1 silicone rubbers. This product is specifically designed for use in sealants and silicone sealants, serving as a special raw material for silicone compounding.