Knowde Enhanced TDS
Identification & Functionality
- Industrial Additives Functions
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Applicable Processes
- Dosage Rates Information
- For precommission cleaning a concentration of 1 - 2% by volume should be used and circulated for a minimum of 2 days and a maximum of 7 days.
- For restoration cleaning a concentration between 2.5 - 5% is normally required, dependent on the degree of fouling.
- The length of time required to affect a clean will again depend on the degree of fouling and the progress of chemical reactions can be monitored by simple on-site test methods or by postal samples to the on-site laboratory.
- Warning: Whilst not aggressive to the parent metal Accepta® Corrosperse 84 is a powerful penetrant and will find any weakness in pipework or joints which is simply sealed by a layer of corrosion products. It is recommended therefore that in the restoration of old systems that an initial concentration of 1% only be added and circulated for 2 days to ensure system is sound before proceeding further. When cleaning system containing Aluminum in conjunction with Copper a supplementary treatment AT-2334 should also be added at the rate of 1 liter/m³ of system capacity.
Properties
- Physical Form
- Appearance
- Clear liquid
- Odor
- Ammonia
- Soluble in
- Water
- Typical Properties
Value | Units | Test Method / Conditions | |
Relative Density | 1.30 - 1.40 | - | - |
pH | 7 - 8 | - | - |
Packaging & Availability
- Packaging
- Weight: 25Kg Drums/Kegs
- Dimensions: 30 × 23 × 47 cm