Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Attributes
As a key component in any static control program, it is non-toxic, non-flammable, and non-staining. This ready-to-use solution formulated specifically for porous surfaces is ideal for eliminating static on carpets, upholstery, and fabrics.
Use Heavy Duty Staticide to eliminate:
- Dust attraction - keep equipment cleaner longer
- Damage potential to sensitive electronic components and subassemblies during manufacture, testing, packaging, shipping, and receiving
- Data errors, paper jams, and other glitches in office machines
- Jamming or slipping of paper, plastics, and other materials during printing, packaging, and converting
- Ignition of combustible vapors, dust, and solvents, causing fire or explosion
- Irregularities caused by static in quality printing, heat sealing, silk screening, lamination, and other special applications
- Static discharge on workbenches and production surfaces
- Product Features
- Formulated for porous surfaces.
- Exceeds MIL-B-81705 and NFPA-56A electrostatic decay criteria
- Meets requirements for topical anti-stats as listed in the Military Handbook DOD-HDBK-263.
- Proven effective in relative humidity below 15%.
- Decays static in less than 2 seconds.
- One gallon covers approximately 2000 sq.ft. per gallon.
- Lasts from weeks to months depending on application.
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Directions
Staticide® topicals can be applied by spraying, wiping, dipping, transfer roller coating, gravure coating, or flexographic printing. Having a s imilar viscosity to water, for high production applications mechanically apply solution by implementing fine-mist sprayers or foam rollers. The product can also be manually sprayed using a trigger sprayer at 8-12” from desired surface. For carpet, apply so that fibers absorb anti-stat. It should feel damp but not saturated. Allow solution to dry.
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
Surface Resistance | 10^9 - 10^10 | Ohms | - |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Packaging & Availability
- Packaging Information
- Product #520: 4-oz bottle; 12 per case (finger-pump sprayer)
- Product #2005: 1-quart bottle; 12 per case (trigger sprayer)
- Product #2002: 1-gallon bottle; 4 per case
- Product #2002-5: 5-gallon pail
- Product #2002-2: 50-gallon drum