Products

PEX-W100KP is a mixture of mono- and di-Phosphate Ester(s). It imparts benefits like: Anti-Corrosion properties and Surface Tension reduction. It is a Phosphate Ester of an Oxo-Alcoholethoxylate with Potassium Hydrogen Phosphate in water.

ADDAPT BioWet 150R is a solvent free, ready biodegradable wetting agent which improves the Wet-Edge (open time) and Water Retention. It is a Polyhydroxy - Amide. The product is EINECS registered.

ADDAPT Anticor A40 is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of PolyHydroxy Amides. All constituents are EINECS registered and comply with the FDA regulation.

ADDAPT Foamstop WS 17 is a highly effective, complete water-soluble Foam Control Agent. It is a proprietary blend of Polyalkyleneglycols and surface-active components. FDA-no - 21 CFR and 173.340

ADDAPTOL™ DB is a non-VOC oxygenated solvent for use as a coalescing agent in waterborne systems and tail solvent in Solvent borne systems. It is a proprietary mixture of branched esters of dibasic acids.

ADDAPT BioWet 60 is a solvent free, ready biodegradable Glass Adhesion promoter and Glass Corrosion inhibitor for aqueous systems on glass substrates. A proprietary blend of PolyAlkylene Glycols and Polyhydroxy – Amide. All constituents are EINECS registered and comply with the FDA regulation (incidental contact with foodstuff).

ADDAPT Foamstop VF 35N is a highly effective Foam Control Agent for low VOCphysical Emulsion systems based on PVAC, Styrene/Acrylics or pure Acrylics. It is a proprietary blend of oils with PAG’s and surface active components - MOSH/MOAH free - All constituents comply with the FDA regulation (incidental contact with foodstuff). FDA regulation: #173.340

ADDAPT PolySurF HPH is a solvent-free UV-curable additive. It can also act as a polymerisable hydrophilic non-ionic surfactant and/or co-polymerisable plasticizer. It is a proprietary mixture of Acrylated mono- and di-Phosphate ester; the mono-Phosphate ester being O-(EO)n>10-CH3 modified; where the reactive Acrylate group is Methacrylate

ADDAPT WaxMul WM 120 is a wax emulsion based on a balanced blend of Polyethylene and Paraffin waxes giving buffable films with excellent gloss and water repellent properties. It is an emulsion of Polyethylene and Paraffin waxes in water.

ADDAPT WaxMul C 325 is a wax emulsion based on refined Type 3-Carnauba wax. This Carnauba wax gives excellent Scratch Resistance, Lubrication, Release & Anti-Block. It is an emulsion based on T3-type Carnauba wax in water. FDA Status - approved under 21 CFR 175.105, 175.300, 175.320, 176.170 and 176.180

ADDAPT WaxMul WM 45 is a very high melting point PP-wax emulsion giving excellent surface hardness and blocking resistance. It is an emulsion of Polypropylene wax in water.

ADDAPT Foamstop 400N is a highly effective, complete water-soluble Foam Control Agent. It is a proprietary blend of Polyalkyleneglycols and surface-active components All constituents are EINECS registered and comply with the FDA regulation.

ADDAPT BioWet 35 is a solvent free, ready biodegradable wetting/leveling agent for aqueous systems such as cleaning agents and coatings/lacquers on wood substrates. ADDAPT BioWet 35 exhibits good dynamic and static surface tension values. A blend of PolyAlkylene Glycols, dispersants and Polyhydroxy - Amide. The ingredients are EINECS registered.

ADDAPT BioWet 175R is a solvent free, biodegradable wetting/leveling agent which improves Open time and Flow in Textured masonry coatings and Plasters. It is a Polyhydroxy - Amide. The product is EINECS registered.

ADDAPT Foamstop 100N is a complete water soluble Foam Control Agent. It is a proprietary blend of Polyalkyleneglycols and surface-active components All constituents are EINECS registered and comply with the FDA regulation.

ADDAPT Foamstop SL 100 is a highly effective and versatile Foam Control Agent. It can be used in aqueous and non-aqueous systems. It is a Silicone Compound containing minerals.

ADDAPT® Anticor L 4783 is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of PolyHydroxycarbonate and Silanes. All constituents comply with the FDA regulation.

ADDAPT CODIS 95 is an effective Co-Dispersant for (mineral) pigments and fillers. It is also suitable for colorants and solvent based Alkyd paints. ADDAPT CODIS 95 is a proprietary blend of Alkanol-amines in water. All constituents are EINECS registered and in compliance with the detergent directive EG/648/2004

ADDAPT Foamstop 400F is a highly effective universal Foam Control Agent for water-based and solvent-based systems. Proprietary blend of Poly-Alkylene Glycols and Surface-Active components.

ADDAPTı BioWet AC 17 is a solvent free, ready biodegradable Foaming Agent designed for emulsion based (acoustic) ceiling and wall paint. It is a proprietary blend of surface active ethoxylates.

ADDAPT_x005F_x0001_ SILSTAB HL+ is a solvent free, Potassium Silicate solution optimized with a hydrophobic component for use in aqueous systems such as Renders (Putz), Textured Masonry Coatings and Interior Paints Stabilized Potassium Silicate solution with a hydrophobic component in water.

ADDAPT WaxMul WM 35 is a high melting point PE-wax emulsion giving very good wet scrub resistance of Paints and improves the buffability of Floor polishes. It is an emulsion of Polyethylene wax in water.

ADDAPT® Anticor AMC 2330 is an emulsifyable anti-corrosion additive for aqueous systems. It protects Aluminum as well as Magnesium and/or combinations thereof. It is a proprietary blend Phosphonates and Glycolethers All constituents are EINECS registered and comply with the FDA regulation.

Ferrocor Flash is a water-soluble corrosion inhibitor for Ferrous and Zinc rich substrates. It is a proprietary blend of Phosphate salts and Phosphonoxy esters. All constituents with the FDA regulation.

ADDAPT Anticor P is a phosphorous based corrosion inhibitor. It acts as a multi metal corrosion inhibitor with emulsifying properties. It is a proprietary mixture of mono-and di-Phosphate ester and surface active ingredients.

ADDAPT® Anticor A 3 is a water free aluminum anti-corrosion additive. It is a proprietary blend of esters and organic silicates. All constituents comply with the FDA regulation.

ADDAPT® Anticor A65N is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of Organic Acids Salts and Silanes. All constituents are EINECS registered and comply with the FDA regulation.

ADDAPT WaxMul WM 25 is a high melting point PE-wax emulsion giving excellent abrasion resistance and also improves the (wet) scrub resistance of Paints and Inks. It is an emulsion of Polyethylene wax in water.

ESTER 20DA is a solvent free pigment dispersing agent for both solvent based and water based systems. It is especially recommended as dispersing agent for Carbon Black. ADDAPT® ESTER 20DA is a synthetic ester

ADDAPT® Anticor A84 is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of Organic Acids salts and Silanes. All constituents are EINECS registered and comply with the FDA regulation.

ADDAPT Foamstop SL 30 is a highly effective and versatile Foam Control Agent. It is extremely stable both on storage and in the final system. It is a Silicone Emulsion containing minerals and fatty acid based emulsifiers

ADDAPT SILSTAB L 100 is a solvent free, Potassium Silicate solution for aqueous systems such as Renders (Putz), Interior and Exterior primers and Textured Masonry Coatings. It is a stabilized Potassium Silicate solution in water.

ADDAPT WaxMul WM 110 is a wax emulsion based on a balanced blend of Polyethylene and Paraffin waxes giving water repellent properties as well as a matting effect. It is an emulsion of Polyethylene and Paraffin waxes in water.

ADDAPT PolySurF ACE is a solvent free polymerisable additive. It imparts benefits like: acid resistance, high gloss, excellent pigment wetting, water repellence, film appearance, UV stability and improved adhesion to thermoplastics. It is the Acrylic Acid adduct of the epoxy ester of Versatic Acid.

ADDAPT Foamstop 666K is a water soluble Foam Control Agent. It is a proprietary blend of Polyalkyleneglycols and surface-active components. All constituents are EINECS registered and comply with the FDA regulation. (incidental contact with foodstuff). FDA-no: 21 CFR and 173.340.

ADDAPT PolySurF HPL is a solvent-free UV-curable additive. It can also act as a polymerisable lipophilic non-ionic surfactant and/or polymerisable plasticizer. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester: the mono-Phosphate ester being O-C12-C14 modified; where the reactive Acrylate group is Methacrylate.