Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Product Features
- Stress-free.
- Tacky epoxy film adhesive.
- Diamond filled, ultra high.
- Thermal conductivity.
- High power die attach.
- Substrate and component.
Applications & Uses
- Applications
- Application Area
- Application Procedures
- Keep product at room temperature for 15 minutes before using.
- Cut to desired size. Clean contact surfaces if needed.
- Remove one side of the release liner by peeling upa corner of the release liner. Fold the release liner over, approaching a 180° angle.
- Pull the release liner quickly, removing it with one stroke. Apply to substrate, then remove other side of release liner and attach die or component.
- Cure according to recommended cure schedules.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Electrical Resistivity (at 150°C, 30minutes) | min. 1x10¹⁴ | Ω-cm | - |
Dielectric Strength | 675 - 825 | Volts/mil | - |
Glass Transition Temperature | -66 to -54 | °C | - |
Lap Shear Strength | min. 6.9 | N/mm² | - |
Device Push Off Strength | min. 13.8 | N/mm² | - |
Hardness | 76.5 - 93.5 | Shore D | - |
Cured Density | 2.07 - 2.53 | g/cc | - |
Thermal Conductivity | 10.26 - 12.54 | W/m-°C | - |
Coefficeint of Linear Thermal Expansion | 93.5 - 126.5 | ppm/°C | - |
Maximum Continuous Operation Temperature | max. 150 | °C | - |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Cure Schedules
Temperature Time Pressure 100°C 2 hrs 5 - 10 psi 125°C 1 hr 5 - 10 psi 150°C 30 mins 5 - 10 psi The die or component can also be tacked on the substrate at 80°C or higher with 5 psi. When a filet around the edge of the die or component is observed, the pressure can be released for the rest of the bonding cycle.
Packaging & Availability
- Product Availability
- RTK7659 is available in reels,sheets, or as custom preforms.
- Standardthicknesses are 0.003" and 0.006".
- Special thicknesses are available.
- This material is a self supporting tacky film adhesive.
Storage & Handling
- Shelf Life
- 1 Year (at 0-5°C)