Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Coating Type
- Ink & Toner Type
- Suggested Applications
Formulated UV/EB curable products containing EBECRYL® 3721 may be applied via direct or reverse roll, offset gravure, metering rod, slot die, knife over roll, airknife, curtain, immersion and spin coating methods, as well as offset, screen and flexographic printing.
EBECRYL® 3721 is recommended for use in:- Clear coatings for paper, wood, and rigid plastic
- Adhesives for paper and film lamination
- Lithographic, screen and flexographic ink vehicles
Properties
- Physical Form
- Appearance
- Clear liquid
- Physical Properties
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Functionality (Theoretical) | 2 | - | - |
Resin | min. 97 | % wt | - |
Density (25°C) | 1.14 | g/ml | - |
Value | Units | Test Method / Conditions | |
Color | max. 4.0 | Gardner | - |
Viscosity (65.5°C) | 3100-4800 | cP/mPa·s | - |
Value | Units | Test Method / Conditions | |
Tensile Strength | 9318 (64.3) | psi (MPa) | - |
Young's Modulus | 459110 (3166) | psi (MPa) | - |
Elongation at Break | 3 | % | - |
Safety & Health
- Precaution
- Before using EBECRYL® 3721, see the Safety Data Sheet (SDS) for information on the identified hazards of the material and the recommended personal protective equipment and procedures.
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage and Handling
- Care should be taken not to expose the product to high temperature condition direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation. See the SDS for the recommended storage temperature range for EBECRYL 372. Please refer to the allnex Guide to Safety and Handling of Acrylate Oligomers and Monomers for additional information on the safe handling of acrylates.