Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Coating Type
- Suggested Applications
Formulated UV/EB curable products containing EBECRYL® 8894 may be applied by spray coating, screen, roller and curtain coating methods.
EBECRYL® 8894 isrecommended for use in coatings requiring:- Excellent humidity resistance
- Exterior durability
- Flexibility
- In-mold decoration.
Properties
- Physical Form
- Appearance
- Clear liquid
- Physical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Butyl Acetate Content | 20 | % wt | - |
| Color | max. 1 | Gardner | - |
| Functionality (Theoretical) | 4 | - | - |
| Resin Solids | 80 | % wt | - |
| Density (25°C) | 1.07 | g/ml | - |
| Viscosity (25°C) | approx. 65000 | cP/mPa·s | - |
| Value | Units | Test Method / Conditions | |
| Glass Transition Temperature | 60 | °C | - |
| Tensile Strength | 4061 (28) | psi (MPa) | - |
| Young's Modulus | 61786 (426) | psi (MPa) | - |
| Elongation at Break | 37 | % | - |
Safety & Health
- Precaution
- Before using EBECRYL® 8894, see the Safety Data Sheet (SDS) for information on the identified hazards of the material and the recommended personal protective equipment and procedures.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage and Handling
- Care should be taken not to expose the product to high temperature condition direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation. See the SDS for the recommended storage temperature range for EBECRYL 889. Please refer to the allnex Guide to Safety and Handling of Acrylate Oligomers and Monomers for additional information on the safe handling of acrylates. Measured on an 80 micron EB-cured film. Stress-strain testing was carried out at 23°C 50% relative humidity, 50 mm/min.