Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
- Leather-Bond 1 is versatile two-part epoxy system contains no solvents, mixes easily at room temperature, and is suitable for high performance structural bonding applications where the combination of very fast room temperature curing coupled with low shrinkage and excellent mechanical and electrical properties is needed.
- Leather-Bond 1 develops strong, tough bonds to metals, plastics, concrete, sheetrock, marbel, stone, rock, tile, plaster, cement, glass and glass fabrics, hardboards and forestry products, Leathers, rubber, masonry materials, and other construction materials.
- Leather-Bond 1 is an excellent electrical insulator, and provides superior resistance to vapors and gasses, water, galvanic action, petroleum fuels, salt solutions, and many other organic and inorganic compounds.
- Leather-Bond 1develops significant properties 1 hour after mixing. However, an extended cure of 4-6 hours at 25°C is required for fully matured bonds.
- Benefits
- Resistant to many organic/inorganics
- Strong bond strength
- Great electrical insulator
- Durable
Applications & Uses
- Markets
- Substrates
Metals, plastics, concrete, sheetrock, tile, marble, stone, rock, plaster,cement,glass fabrics, wood, leather and rigid plastics.
- How To Use
- Carefully clean and dry all surfaces to be bonded.
- Apply Leather-Bond 1 Hour Cure Strongest Industrial Grade Epoxy Adhesive Quickly Hardens completely mixed adhesive to theprepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
- Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
- Some ingredients in this formulation provided maycrystallize when subjected to low temperature storage. Agentle warming cycle of 52°C for 30 minutes prior to mixingcomponents may be necessary. Crystallized epoxycomponents do not react as well as liquid components andshould be re-dissolved prior to use for best results.
- Instruction for Application
Leather-Bond 1 develops a high exotherm. Use immediately after mixing. The exothermic reaction begins within 2 minutes after initiating the mixing step, so have everything ready before mixing.
Properties
- Appearance
- Slight haze/ slight straw
- Typical Properties
- Thermal Properties
- Uncured Properties
- Miscellaneous Properties
| Value | Units | Test Method / Conditions | |
| Cure Type | Room temperature or Heat Cure | - | - |
| Value | Units | Test Method / Conditions | |
| Operating Temperature | (-60) - 110 | °C | - |
| Value | Units | Test Method / Conditions | |
| Specific Gravity (Mixed) | 1.2 | g/cc | - |
| Solids Content | 100.0 | % | - |
| Viscosity (25°C) | Thixotropic | cps |
| Value | Units | Test Method / Conditions | |
| Volume Resistivity | 5x10^11 | mPa∙s (cP) | |
| Dielectric Constant | 4.8 | - | - |
| Dielectric Strength | 410.0 | kV/in | - |
| CTE, Linear (RT) | 33.3 | μin/in-°F | - |
| Glass Transition Tempearture | 25.0 | °C | - |
| Hardness | 70.0 | Shore D | - |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Cure Schedule
30 minutes 65°C 2 hours 25°C
Packaging & Availability
- Availability
This epoxy can be supplied in various different packages.
Size - 2.5gm pouch, 5gm pouch, 10gm pouch, 100gm kit, 250gm kit, 10ml Easy Dispensing System, 50ml Dual Cartridge, Mixing Tip.