Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Email is intended for top glossy coatings of wood, especially wooden windows, doors, suspended ceilings, etc. in the interior and exterior.
- It is characterized by excellent mechanical properties, high coverage and resistance to UV radiation, excellent plasticity, very fast drying and high gloss.
- The enamel spreads well, does not form curtains during application and has excellent pourability. The white shade is characterized by high whiteness.
- Email is not intended for coatings that come into direct contact with food, feed and drinking water and coatings for children's furniture and toys.
- Enamel may be used on surfaces that come into indirect contact with food, feed and drinking water.
- Extremely weather resistant
- Highly flexible coating
- High coverage coating
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Fields of Application
- Background: wood, fiberboard, metal
- Environment: interior
- Examples: parquets, planks, cork floors, chipboard floors, wall and ceiling coverings, beams, concrete floors, stairs, masonry, insides of metal tanks, concrete sumps, etc.
- Dilution
S 6006
- Preparation of the Substrate
- Before application, the wood must be clean, dry, well sanded, with a maximum moisture content of 12%.
- Wood with increased content of resins (larch, pine) should be freed from all resin spills with thinner C 6000.
- The final appearance of the coating and its service life depend on the quality of the pre-treatment of the wood.
- Prime the wood surface first with diluted epoxy varnish to ensure uniform absorption of the substrate.
- Then sand the surface of the wood with fine sandpaper, then apply the final layers of epoxy varnish.
- The metal substrate must be clean, dry, free of grease, rust and dust, mechanically cleaned.
- During renovation coatings, it is necessary to remove old non-stick coatings from the wood and ensure good strength of the substrate (when the old coating is completely removed, the new coating is applied gradually, including impregnation of the wood).
- It is recommended to follow the entire coating system according to the manufacturer's catalog sheet.
- Application Conditions
- Apply in stable and dry weather, during the application period and throughout the drying time, the minimum air and substrate temperature must be 5°C, and the maximum 40°C.
- The optimal temperature for applying the paint is 18°C to 23°C and relative humidity 40 to 70%.
- Lower temperature and higher relative humidity during application and drying and too thick layer of the applied film significantly slow down the drying and hardening of the paint film.
- High relative air humidity and increased humidity of wood or masonry cause defects in the paint film.
- The type, surface and possibly previous coating of the wood affect the resulting shade of the coating.
- Natural wood changes color under the influence of light, independent of varnish.
- In the case of exotic types of wood, due to the influence of the varnish on the resulting shade of the wood, it is advisable to test the varnish on a small area first.
- It is recommended to apply at least 3 topcoats to new floors.
- A higher thickness of the resulting layer improves the overall quality and durability of the coating.
- For the first 14 days, it is necessary to protect the coating from careless handling and intensive washing of the surface with water.
- The stackability and adhesion of painted surfaces must be tested for specific conditions (climatic conditions, layer thickness, number of coats, shape of the substrate, type of substrate, etc.).
- Work Progress
- Mix thoroughly before use and dilute as needed.
- 1 – 2x impregnation with the product impregnation base lazurol s 1033;
- 1 – 2 coats of basic color pragoprimer plus s 2070 or lazurol oknobal základ s 2060;
- 1 – 2 coats of lazurol oknobal email u 2015 at an optimal thickness of 35 μm. For a long service life of the coating, apply in two thin layers.
- A coating with a thickness of 30 – 35 μm can be recoated within 10 hours of the first layer being made at a temperature of 20 to 25 °c.
- If the layer is thicker, the interval between coats needs to be extended.
- Method of Application
Spray, brush, roller
Properties
- Color
- Typical Properties
- Cured Properties
- Hardness by Pendulum Device
From 5% after 5 days
| Value | Units | Test Method / Conditions | |
| Consistency (Ø 4mm Ford) | 130 - 180 | s | - |
| Content of Non-volatile Substances by Weight | 66.0 | % | - |
| Content of Non-volatile Substances by Volume | 52.0 | % | - |
| Point of Ignition | min. 36 | °C | - |
| Density | 1180.0 | kg/m³ | - |
| VOC (Topcoat) | 0.24 | kg/kg mixture | - |
| TOC (Topcoat) | 0.2 | kg/kg mixture | - |
| Maximum Threshold Value (Content of Volatile Substances) | 300.0 | g/L | - |
| Maximum Content of Volatile Substances (Ready-to-use State) | 299.0 | g/L | - |
| Drying Temperature (Substrate) | 23.0 | °C | - |
| Dry Against Dust | max. 4 | hours | - |
| Drying (Withered) | max. 36 | hours | - |
| Dry Layer Thickness | 30 - 35 | µm | - |
| Wet Film Thickness | 60 - 70 | µm | - |
| Dry Film Thickness | 30 - 35 | µm | - |
| Theoretical Capacity | 15 - 17 | m²/L | - |
| Kryvost | Grade 1 | - | - |
| Value | Units | Test Method / Conditions | |
| Gloss Level | 1 - 2 | - | - |
Safety & Health
- Safety and First Aid
- The product contains organic solvents.
- Follow basic hygiene rules.
- Do not eat, drink or smoke while using this product.
- Avoid contact with eyes, skin or clothing. Wear protective gloves and protective clothing when working.
- Ensure effective ventilation of the workplace.
- People and animals should not stay in the treated area until the coating has dried.
- In case of skin contact, remove contaminated clothing and wash skin with plenty of soap and water.
- When inhaling, move to fresh air.
- In case of eye contact, flush eyes thoroughly for 10 to 15 minutes with clean water.
- If swallowed, rinse mouth with water.
- In case of health problems or in case of doubt and in case of accidental ingestion and contact with the eyes, always seek medical attention immediately.
Packaging & Availability
- Shades
- 1000 - white
- 2800 - rosewood
- 6003 - ivory
- Packaging
- 0.6L; 2.5L; 4 liters
Storage & Handling
- Shelf Life
- The product retains its useful properties for 5 years from the date of manufacture, in the original, unopened packaging.
- Storage & Handling
- Store in a dry warehouse at a temperature of 5 to 25 °C.
- Flammable liquid II. hazard class.
- Disposal of Packaging and Waste
- Hand over the used, properly emptied packaging to the collection point for packaging waste.
- Dispose of packaging with product residues at a place designated by the municipality for the disposal of hazardous waste or hand it over to a person authorized to dispose of hazardous waste.