Products

Lutensol® AO 11 is a nonionic surfactant that is approximately 100% active. It is derived from C13C15 oxo alcohol with 11 moles of ethylene oxide, consisting of approximately 67% C13 and 33% C15. This high-performance surfactant exhibits low toxicity and offers excellent emulsification, dispersion, wetting, and compatibilizing properties.

Lutensol® AO 3 is a nonionic surfactant that is approximately 100% active. It is derived from C13C15 oxo alcohol with 3 moles of ethylene oxide, consisting of approximately 67% C13 and 33% C15. This high-performance surfactant exhibits low toxicity and offers excellent emulsification, dispersion, wetting, and compatibilizing properties.

Plurafac® LF 431 offers excellent caustic stability and does not yellow when in direct contact with NaOH beads. The choice of final surfactant depends on the formulation and temperature of the cleaning process. Its essential properties include wetting, low-foaming, or even defoaming.

Sokalan® HP 96 is a clear to rarely slightly cloudy, yellow liquid at room temperature, available as a 70% active liquid. It tends to form sediment when cold and can help reduce the level of anionic surfactants in laundry formulations while providing anti-graying benefits.

Lutensol® AO 8 is a nonionic surfactant with approximately 100% activity, based on C13C15 oxo alcohol with 8 moles of ethylene oxide and consisting of about 67% C13 and 33% C15. It is a high-performance surfactant with low toxicity, providing excellent emulsification, dispersion, wetting, and compatibilizing properties.

Lutensol® XL 70 is a 100% active product with very fast dynamics and excellent detergency on oily soils. It has a lower tendency to form a gel compared to longer-chain alcohol ethoxylates due to its fast-acting nature, which is attributed to its superior wetting profile.

Lutensol® XP 30 is a dynamic wetting agent with a C10 Guerbet Alcohol Ethoxylate POE (3) composition and 100% active content. It is synthetically derived and readily degradable. This product is suitable for various formulation types, including emulsifier concentrates, oil-in-water and water-in-oil emulsions, microemulsions, suspension concentrates, suspo-emulsions, soluble liquids, and wettable powders.

Lutensol® XP 80 is a 100% active product with very fast wetting and effective cleaning. It is readily biodegradable and has a lower tendency to form gels compared to longer-chain alcohol ethoxylates. Additionally, it is listed on the EPA’s Safer Chemical Ingredients List. The final surfactant choice would be formulation-dependent.

Pluronic® P 105 is a block copolymer surfactant composed of ethylene oxide and propylene oxide. It contains 50% ethylene oxide and has a molecular weight of 6500. This surfactant is 100% active and offers a range of functions in various applications.

Lutensol® TO 5 is a nonionic surfactant with an approximate 100% active ingredient content based on a saturated iso-C13 alcohol ethoxylated with 5 moles of ethylene oxide. It is a high-performance surfactant known for its low toxicity. Lutensol® TO 5 exhibits excellent emulsification, dispersion, wetting, and compatibilizing properties, making it a versatile choice for various applications.

Pluriol® E 1450 PRILL is a 100% polyethylene glycol with a molecular weight of 1450. It has low toxicity and can be used for various purposes, such as a thickener, lubricant, defoaming agent, and dispersant. It also functions as a binder. Additionally, it is classified as a nonionic surfactant.

Pluronic® L 44 INH is a nonionic block copolymer surfactant that contains 40% ethylene oxide (EO) and propylene oxide (PO). It is a liquid surfactant with a moderate hydrophilic-lipophilic balance (HLB) of 12 and a cloud point of 42°C. Pluronic® L 44 INH offers a range of features and benefits, making it suitable for various applications.

Myacide® GA 50 is a biocide composed of 1,5-Pentanedial, also known as glutaraldehyde. It is a colorless-to-yellow liquid with a pungent odor. This biocide can be formulated in different ways, including capsule suspension, granules, microemulsion, suspension concentrates, suspoemulsion, and soluble liquid, depending on the intended use and application.

Lutensol® TDA 3 is an ethoxylated tridecyl alcohol POE (3). It is a good emulsifier with good wetting, dispersing, and solubilizing properties and relatively low foaming. It has a wide range of applications, including its use in emulsifier concentrates, emulsions (oil and water), microemulsions, suspension concentrates, suspo-emulsions, soluble liquids, and wettable powders.

Pluronic® 17R4 is a 100% active product that is ideal for use as a foam controlling agent in machine floor cleaning applications. The final choice of surfactant will depend on the specific formulation. This EO/PO-block polymer has approximately 40% EO and a cloud point of 46°C.

Lutensol® TO 8 is a high-performance nonionic surfactant with approximately 100% active content. It is derived from a saturated iso-C13 alcohol and contains 8 moles of ethylene oxide. This surfactant exhibits low toxicity and offers excellent emulsification, dispersion, wetting, and compatibilizing properties.

Sokalan® HP 20 is an 80% liquid multifunctional polymer that enhances the detergency of LAS and reduces clay re-deposition while also improving the detergency on oxidizable stains. It is highly effective at moderate pH levels and provides these multifunctional benefits for boosting detergency of LAS, reducing clay re-deposition, and improving detergency on oxidizable stains.

Lutensol® XP 90 is a 100% active nonionic surfactant that enhances the wetting and degreasing power of foam cleaners. With its fast dynamics and excellent detergency on oily soils, it finds application in various fields, including dishwashing, laundry, hard surface cleaning, food and beverage processing, food service and kitchen hygiene, commercial and institutional laundry, and industrial cleaning.

Plurafac® LF 500 is a low-foaming nonionic surfactant that provides excellent foam control for Glucopon® surfactant and Deriphat® 160 C. It is mainly used for its wetting, low-foaming, or even defoaming properties. Plurafac® LF 500 finds applications in various industries, such as food and beverage processing, food service and kitchen hygiene, commercial laundry, institutional cleaning and sanitation, and industrial cleaning.

Lutensol® AO 7 is a nonionic surfactant, approximately 100% active, that is based on C13C15 oxo alcohol with 7 moles of ethylene oxide that consists of ca. 67% C13 and ca. 33% C15. It is a high-performance surfactant with low toxicity. It also offers great emulsification, dispersion, wetting, and compatibilizing properties.

Lutensol® XP 50 is an excellent wetting agent composed of C10 Guerbet Alcohol Ethoxylate POE (5) with 100% active content. It is a highly effective substitute for NP-6. The product is synthetically derived and readily degradable. Lutensol® XP 50 is suitable for a wide range of formulation types, including emulsifier concentrates, oil-in-water and water-in-oil emulsions, microemulsions, suspension concentrates, suspo-emulsions, soluble liquids, and wettable powders.

Plurafac® D 250 is a non-ionic emulsifier that is suitable for oily soils, with a cloud point of 59°C and moderate foaming properties. It belongs to the EO/PO alcohol surfactant category and functions as a good non-ionic emulsifier for oily soils.

Plurafac® LF 400 is a surfactant composed of predominantly unbranched fatty alcohols, including higher alkene oxides and ethylene oxide. The product is a low-foaming surfactant that offers excellent performance in terms of spotting and filming and has wetting and low-foam properties.

Lutensol® TDA 6 is an ethoxylated tridecyl alcohol POE (6). It is a good emulsifier with excellent wetting, dispersing, and solubilizing properties and relatively low foaming. Lutensol® TDA 6 has a wide range of applications, including its use in emulsifier concentrates, emulsions (oil and water), microemulsions, suspension concentrates, suspo-emulsions, soluble liquids, and wettable powders.

Pluronic® 25R4 is a highly effective block copolymer surfactant with terminal secondary hydroxyl groups. It is specifically designed as an ethylene oxide and propylene oxide reverse block copolymer, providing unique properties for various applications. This surfactant acts as a dispersant, offering excellent associative thickening, dispersing, and wetting characteristics with minimal environmental impact.

Pluronic® N3 is a 100% active product suitable for low temperature commercial dishwashing machines. It provides excellent defoaming and wetting, with a low foaming surfactant and a cloud point of 28°C. It has very good synergy with Plurafac SLF 180 when used as a rinse aid in a low temperature dishwashing machine and is listed on EPA’s Safer Chemical Ingredients List. Final surfactant choice is formulation dependent.

Plurafac® LF 403 is a low-foaming nonionic surfactant composed of predominantly unbranched fatty alcohols alkoxylated with higher alkene oxides and ethylene oxide. Its most important properties are wetting, low-foaming, or even defoaming, making it an excellent choice for controlling foam, particularly when used in combination with Glucopon® surfactant and Deriphat® 160 C.

Pluronic® 31R1 is a 100% active product with a cloud point of 25°C. It is suitable for machine floor cleaning as an excellent foam controlling agent and provides very good defoaming properties. The final surfactant choice depends on the formulation. It is listed on EPA’s Safer Chemical Ingredients List and is suitable for institutional cleaning and sanitation as well as food and beverage processing and kitchen hygiene.

Tetronic® 1107 PRILL is an amine-based tetrafunctional block copolymer surfactant terminating in primary hydroxyl groups. It is an emulsifier and a great foaming agent. Tetronic® 1107 PRILL is used for the following formulation types: emulsifier concentrates, emulsions (oil and water), suspension concentrates, suspo-emulsions, and oil dispersions.

Lutensol® XL 40 is available as a 100% active product and is suitable for machine floor cleaning as a foam controlling and degreasing agent. The level of residual alcohol is comparatively very low when compared to regular alcohol ethoxylates with the same degree of ethoxylation. It has a HLB value of 10.5 and is listed on the Safer Choice label. The final surfactant choice will be dependent on the formulation.

Pluronic® L 61 is a 100% active product and suitable for low-temperature commercial dishwashing machines. It is a low-foaming surfactant that provides good defoaming and wetting. In addition to its use in dishwashing machines, it is also suitable for machine floor cleaning as a foam controlling agent.

Lutensol® XP 40 is a nonionic surfactant manufactured by causing a C10-alcohol to react with ethylene oxide in stoichiometric proportions. It is a cloudy liquid at room temperature and tends to form sediment. The numeric code in the product name indicates the general degree of ethoxylation.

Tetronic® 904 is a tetrafunctional block copolymer surfactant with terminal primary hydroxyl groups. As a nonionic surfactant, it is 100% active and relatively nontoxic. Tetronic® 904 offers a range of beneficial properties, including wetting, emulsification, and foaming. Its versatility makes it suitable for various formulation types, such as emulsifier concentrates, microemulsions, suspension concentrates, suspo-emulsions, soluble liquids, wettable powders, and oil dispersions.

Lutensol® XP 89 is a nonionic surfactant manufactured by causing a C10-alcohol to react with ethylene oxide in stoichiometric proportions. It is an alkyl polyethylene glycol ether based on C10-guerbet alcohol and ethylene oxide and is a clear liquid at room temperature. The numeric code in the product name indicates the general degree of ethoxylation.

Pluronic® F 127 PRILL is a highly versatile EO/PO block copolymer surfactant with an 80% EO (ethylene oxide) content. With a molecular weight of 8400, it is a difunctional surfactant that terminates in primary hydroxyl groups. This nonionic surfactant is 100% active and has a relatively low toxicity profile.

Lutensol® XL 100 is a synthetically derived, readily biodegradable C10 guerbet alcohol alkoxylate POE (10) with 100% active content. This product is a highly effective solubilizer and offers excellent emulsification properties. It complies with the requirements of Regulation (EC) No 648/2004 on detergents and has been tested for biodegradability and emulsifying properties according to the methods listed in Annex III.