Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Highlights
- High bond strength
- High elongation
- Low color
- Low neat viscosity
- Exhibits hydrolytic stability
- Improves adhesion
Applications & Uses
- Markets
- Applications
- Coating Type
- Recommended Applications
- Primer Coatings
- Interior Glass Coatings
- Electronics
Properties
- Uncured Properties
Value | Units | Test Method / Conditions | |
Viscosity (at 25°C) | 100,000 | cP | |
Color (Pt-Co) | 20 | APHA | |
Refractive Index (at 25°C) | 1.493 | ||
Density (at 25°C) | 1.08 | g/cm3 |
Technical Details & Test Data
- Typical Formulations
Adhesion Properties Substrate I30 I50 TM50 TP50 H50 HE30 ABS X XX XXX X XXX XX Aluminum XXX XXX Cold Rolled Steel
X XXX X XX Glass X XXX XXX HDPE PET XXX XXX XXX XX XXX XXX PMMA X XXX XXX XXX X Polycarbonate X X XXX XXX X Polypropylene PVC X XXX XXX XX XXX X Stainless Steel X XXX X XXX X Recommended XX Highly Recommended XXX Strongly Recommended
Typical Formulations Test Formulation Name 130 150 TM50 TP50 H50 HE30 BR-742M 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad 184 2 2 2 2 2 2 Viscosity, 25°C* 3,500 2,600 2,800 2,900 1,300 7,600 * Brookfield – CAP 2000+ @ 25°C.
Cured Mechanical Properties Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi**
1,700 2,500 2,900 2,200 2,500 1,400 Elongation, 6** 110 110 3 15 6 95 Elastic Modulus, ksi*
7.2 75 130 45 70 20 Durometer Hardness
62D 76D 85D 75D 79D 70D Water Absorption, 96 (24 hrs)
0.75 0.39 0.70 0.85 0.6 3 MEK Double Rubs (#)
20 7 >200 45 70 93 Tg(DMA)=38°C; Peak tan delta; cured with 2 phr of Omnirad® 184 - Viscosity Reduction With Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.