Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Features
- Promotes surface and through-drying properties
- Usually used in combination with cobalt
- Can be used with secondary driers like zirconium, barium or zinc for complete drying of the paint film
- More suitable in pigmented coatings systems as it may cause discoloration in pale-colored or clear coatings
Applications & Uses
- Ink & Toner Type
- Applications
- Oil-based inks
- Dosage
- In conventional alkyd formulations, the Manganese addition is between 0.01 and 0.05 % metal based on the vehicle solids of the coating and will vary depending upon the composition of the binder. In printing inks, a combination of Manganese and Cobalt driers is recommended. The additional amount of Cobalt is between 0.03 and 0.08 % based on binder solids. 6% Manganese Lin-All® PI Drier can also be combined with Zirconium and Calcium driers for optimum surface and through dry. The specific drier blend should be experimentally determined.
Properties
- Physical Form
- Appearance
- Brown liquid
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Metal Content (Mn) | 5.90 - 6.20 | % | - |
| Non-volatile Content | min. 98.00 | % | ASTM D 1644 |
| Specific Gravity (at 25°C) | 1.010 - 1.040 | - | ASTM D 1963 |
| Viscosity | 160.0 - 200.0 | seconds | - |
Regulatory & Compliance
Safety & Health
- Safety
- Please refer to our safety data sheet for information relating to product safety.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage
- Protect from the effects of weathering and store at temperatures below 50 °C. Once opened, containers should be resealed immediately after each use.