Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Product Features
- Exceptionally good thickening properties in most fine particle dispersion binders with low emulsifier content
- Very high water-retention capacity which promotes longer wet edge times than normal
- Added at low levels so water and scrub resistance of the cured surface will not be adversely affected
- Will not cause yellowing or chalking in cured film
Applications & Uses
- Applications
- Coating Type
- Use Level
- 0.1 - 2%
- Dosage Information
- The exact dosage must be experimentally determined.
- In most applications, Borchi® Gel PW 25 must be pre-diluted with water first at a ratio of 1:4.
- This solution can then be added at any stage of the production including as a viscosity adjustment.
- Borchi® Gel PW 25 can only be used in its supplied form if there is sufficient water at a temperature of 50 - 60°C available for the dispersion; however, the binder must be added last.
Properties
- Physical Form
- Appearance
- Yellow liquid
- Soluble in
- Water, 1-2 Propanediol
- Physical Properties
Value | Units | Test Method / Conditions | |
Density (at 20°C) | 1.07 | g/cm³ | DIN 51757 |
Non-volatile Content (1g, 1h, 105°C) | 24 - 26 | % | ISO 3251 |
pH | 7 | ||
Viscosity (at 20°C) | 8000 - 15000 | mPa.s |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage Conditions
Protect from the effects of weathering and store at temperatures between 5 and 30°C. Once opened, containers should be resealed immediately after each removal of the product.