Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Special Features
Good Stiffness Impact Balance - High Flowability
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
Pillar Trims - Door panels and pockets
- Processing Methods
The actual processing conditions will depend on the type of equipment used
Following parameters should be used as guidelines:
Holding pressure- 30 - 60bar
Feeding temperature- 40 - 80°C
Mold temperature- 30 - 50°C
Melt temperature- 220 - 260°C
Screw speed- Low to medium
Properties
- Physical Form
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Density | 906 | kg/m3 | ISO 1183 |
| Melt Flow Rate (230°C/2.16Kg) | 100 | g/10min | ISO 1133 |
| Tensile Modulus (1 Mm/Min) | 1550 | MPa | ISO 527-2 |
| Flexural Modulus (2Mm/Min) | 1650 | MPa | ISO 178 |
| Tensile Strain At Yield (50Mm/Min) | 4 | % | ISO 527-2 |
| Tensile Stress At Yield (50Mm/Min) | 29 | MPa | ISO 527-2 |
| Heat Deflection Temperature | 105 | °C | ISO 75-2 |
| Charpy Impact Strength, Notched (23°C) | 4 | kJ/m² | ISO 179/1eA |
| Charpy Impact Strength, Notched (-20°C) | 2 | kJ/m² | ISO 179/1eA |
Regulatory & Compliance
- Chemical Inventories
- Recycling
The product is suitable for recycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling.
- Standards
Borouge is certified to various ISO standards,
Safety & Health
- Safety
The product is not classified as a hazardous preparation.
Storage & Handling
- Storage
BJ356AI should be stored in dry conditions at temperatures below 50°C and protected from UV-light. Improper storage can initiate degradation, which results in odor generation and color changes and can have negative effects on the physical properties of this product.