Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Solvents
- Water
- Technologies
- Product Families
- Composition
Solution of an alkylol ammonium salt of a higher molecular weight acidic polymer.
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Markets
- Applications
- Adhesive & Sealant Type
- Coating Type
- Coatings Industry
Special Features and Benefits - The additive acts in aqueous systems by controlled flocculating the pigments. This primarily prevents the flooding/floating and sedimentation of the pigments as well as sagging. Thixotropy is enhanced. The controlled flocculating properties may lead to a slight gloss reduction.
Recommended Use -
Architectural Coatings
Especially Recommended
Industrial Coatings
Especially Recommended
Protective Coating Systems
Especially Recommended
Automotive Oem Coatings
Recommended
Leather Finishes
Recommended
Recommended Levels:-
Additive dosage as supplied on pigment:
- Inorganic pigments: 5-10%
- Titanium dioxides: 1.5-3%
- Fillers: 1-1.5%
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
Incorporation and Processing Instructions- For optimum performance, the additive must be incorporated into the millbase before addition of pigments.
- Adhesives And Sealants
Special Features and Benefits -The additive acts in aqueous systems by controlled flocculating the fillers and particles. It reduces the viscosity in filled systems and, at the same time, prevents sedimentation and flooding/floating. Thixotropy is enhanced.
Recommended Use - The additive is recommended for all aqueous adhesives and sealants.
Recommended Levels -
Additive dosage as supplied on pigment:
- Inorganic pigments: 5-10%
- Titanium dioxides: 1.5-3%
- Fillers: 1-1.5%
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
Incorporation and Processing Instructions -
For optimum performance, the additive must be incorporated into the millbase before addition of pigments.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Amine Value | 41 | mg KOH/g | - |
Acid Value | 46 | mg KOH/g | - |
Density At 20°C | 1.07 | g/ml | - |
Non-Volatile Matter (10 min., 150 °C) | 70 | % | - |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Storage And Transportation
Separation or turbidity may occur during storage or transportation below 0 °C. Heat to 20 °C and stir.