Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Identification & Functionality
- Biodegradable Detergents: Yes
- Active Acids: Hydrochloric Acid, Phosphoric Acid, Dodecylbenzenesulfonic Acid.
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- No harsh fumes
- Fast
- Inhibited
- Powerful cleaning action
- Non-flammable
- Concentrated
- Economical
- Versatile
- Effective
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Directions
- Apply ACI-TECH by brush, cloth, dip or soak method.
- Heavy-duty cleaning - Use full strength. Rinse thoroughly.
- Medium duty cleaning - Mix one part ACI-TECH with one to four parts water. Rinse thoroughly.
- Light duty cleaning - Dilute one part ACI-TECH with five to ten parts water. Rinse thoroughly.
- Metal parts - Dip item to be cleaned in the solution or apply ACI-TECH solution to the parts with a brush or cloth. Agitate to loosen scale and corrosion. Rinse thoroughly.
- Concrete etching - Dilute one part ACI-TECH with one or two parts of water. Apply to the surface at the rate of 250 square feet per gallon or 5 square meters per liter with a stiff broom, brush, or plastic sprinkling can. After the surface has been completely covered and bubbling action has ceased, flush thoroughly with clear water and allow to air dry.
NOTE: Wear rubber gloves and eye goggles when handling. Do not use on aluminum, galvanized steel or stainless steel. For stainless steel use Cantol’s BT-49. After using ACI-TECH on any surfaces, be sure to rinse thoroughly with water. Never allow solution to dry on the surface. To avoid flash rusting of metal, protect with Cantol’s Protective Oil or Instant.
- Applications
- Most metals including brass and copper
- Brick, stone
- Concrete floors
- Concrete trucks
- Urinals
- Toilets
- Ceramic tile
- Quarry tile
- Terrazo
- Water meters
- Steam lines
- Water pumps
- Metal concrete forms
- Air conditioners
- Boat bottoms
- Heat exchangers
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Regulatory & Compliance
Accepted for use in food processing plants and facilities operating under the United States Department of Agriculture, the U.S. Department of Commerce - Fishery Products Inspection Program and the Canada Meat Inspection Act and Regulations.
Technical Details & Test Data
- Technical Data
- Effect on Stainless Steel: Dulls the finish. Use BT-49
- Effect on Aluminum, Galvanized Steel: Attacks the surface. Do not use.
Safety & Health
- Precautions
- Corrosive
- Do not get in eyes, on the skin, or on clothing.
- Contains Hydrochloric Acid.
- In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Seek prompt medical attention. Flush skin with water.
- Harmful if swallowed. If swallowed, do not induce vomiting. Give large quantities of water. Call a physician.
- Do not breathe vapor or fumes.
- Keep container closed.
- Use with adequate ventilation.
- Keep from freezing.
- For industrial and institutional use only.
- Keep out of the reach of children.