Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Fluids & Lubricants Features
- Product Highlights
CER-PCMO is formulated with the patented technology of Ceramic Reinforced Technologies which “Ceramically reinforces” the PTFE. The reinforcement significantly increases its durability and application range and the technology also provides improved EP, load carrying and anti-wear properties in fully formulated and finished coatings and lubricants. Benefits can include energy savings, smoother mechanical operation, extended life, and reduced maintenance costs of the object being coated or lubricated. The “reinforced” PTFE reduces surface to surface contact and scuffing while providing reliable low friction lubrication under boundary conditions.
Applications & Uses
- Markets
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Typical Uses
- Assembly
- Chain and Conveyor Lubricants
- Gear Lubricant
- General Purpose Lubricants
- Penetrating Oils
- Aerosol Lubricants
- Methods of Use
Dilution:
CER-PCMO can be blended with most commercially available oils. In large batch blending, the oil should be heated to 50-55⁰C (122-131⁰F). Stir the CER-PCMO thoroughly for uniform consistency, then premix equal parts of CER-PCMO and the other carrier(s)/diluents(s) before blending with the balance of the carrier(s)/diluents(s). Agitate consistently by mechanical stirring throughout the blending operation. A small amount of soft settling of the larger particles may occur during long periods of storage. Mild agitation will restore these particles back into suspension. Always thoroughly agitate immediately before using the diluted form of CER-PCMO.
Application:
For best results, use CER-PCMO at one (1) percent PTFE/BN solids by weight in the finished oil, or approximately five (5) to seven (7) percent by weight of CER-PCMO. The final concentration of CER-PCMO should be chosen for the desired results and/or performance.
Properties
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Carrier | 150 SUS SN Petroleum Oil | - | - |
| Density | 7.60 - 8.60 | lbs/gal | ASTM D1475 |
| Flash Point (Minimal) | 193.0 | °C | - |
| Flash Point (Typial) | 218.0 | °C | - |
| Hegman Grind | 7.0 - 8.0 | - | ASTM D1210 |
| Lubricating Solids | CERFLON® (PTFE/hBN) | - | - |
| Particle Size | 0.1 - 3.0 | μ | ASTM E2490 - d50 - MIE |
| Solids Content (PTFE/hBN) | 20.0 | % | - |
| Viscosity | min. 1000 | cP | ASTM D2196 - Brookfield 6/20 |
Packaging & Availability
- Packaging Type
- Container Size
35 lb. (15.88 kg) 5 gallon pail 400 lb. (181.4 kg) 55 gallon drum 2640 lb. (1197 kg) 330 gallon tote
Storage & Handling
- Storage
Keep container closed when not in use to avoid contamination.