Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- PERMATEC 3000 CT is a 100% solids system and allows for a fast application where good chemical and wear resistance are required.
- PERMA TEC 3000 CT can be installed over most sound floors including old or new concrete, steel and most types of repair mortars.
- At varying thickness up to 1/4 inches, the PERMA TEC 3000 CT system provides long term chemical resistance for splash and spill or immersion in many chemicals.
- PERMATEC 3000 CT provides excellent physical incorporated protection even in the harshest industrial settings.
- The physical properties of PERMA TEC 3000 CT are many times those of standard concrete.
- Rapid cure, resulting in minimal downtime.
- 100% non-porous
- Odor free
- Non-skid safety finish.
- Can be applied in temperatures between 45 and 65 °F.
Applications & Uses
- Applications
- Application Area
- Application Method
- Functions
- The primary use of PERMATEC 3000 CT is as a high strength floor topping for industrial service where severe mechanical abuse and/or chemical exposure is anticipated and where application temperatures between 45°F and 65°F are encountered. Typical applications include food processing plants, breweries, laboratories, chemical processing plants, waste disposal facilities, pulp and paper mills, refineries, mines, chemical storage areas and other industrial processing areas where chemicals are used.
- Cure Time
The cure time of PERMATEC 3000 CT and other resinous systems are very dependent upon the temperature of the substrate. The ambient temperature may not be the same as the substrate temperature. For example during winter, concrete may be colder than the surrounding ambient temperature. As temperatures during the day my increase, large masses of concrete will be much slower to react. During summer days direct sunlight will increase the concrete temperature over that of ambient air. The substrate temperature should be monitored and remain at or above 45°F.
Service (Hours) 45F 55F 65F Foot Traffic 12 8 4 Light Chemical 12 10 10 Fork Lift 24 16 12 Heavy chemical 7 Days 6 Days 3 Days - Product Application
Application thickness may vary from 1/8 to ¼ inches, depending on the expected service conditions. Factors to consider are length of chemical exposure (i.e., immersion vs. splash/spill) and mechanical abuses (i.e., tow traffic, loaded trucks vs. cart and foot traffic, etc.). PERMATEC 3000 CT should not be applied over:
- substrates
- Subject to hydrostatic pressure.
- Unsound structures.
- Contaminated substrates which cannot be cleaned.
- At temperatures below 45 degrees F (Consult ChemProof Polymers).
- Which are wet during application.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Solids (Volume) | 100.0 | % | - |
Compressive Strength | 14000.0 | psi | ASTM C579-82 |
Flexural Strength | 4000.0 | psi | ASTM C580-85 |
Tensile Strength | 2000.0 | psi | ASTM C307-83 |
Taber Abrasion (CS 17 Wheels, Loss/1000 Cycles, w/1000 gms) | 25.0 | mg | ASTM C501-80 |
Bond Strength to Concrete | Failure in Concrete | - | ASTM D4541-89 |
Water Absorption | 0.1 | % | ASTM C413-93 |
Safety & Health
- Safety
PERMATEC 3000 CT contains blended epoxies as the resin and blended amines as the hardener. Protective clothing and gloves are recommended to prevent sensitization to these materials. In case of ingestion or eye contact, it is advisable to contact a physician immediately.
Packaging & Availability
- Packaging
PERMATEC 3000 CT is available in 20, 100, and 1000 square foot units based on ¼ inch applications. Each unit consists of pre-measured components, Part A (Resin) and Part B (Hardener). Graded aggregates are available or may be sourced locally.
Storage & Handling
- Storage & Shelf Life
PERMATEC 3000 CT should be stored at 45-90 °F out of direct sunlight. All containers should remain unopened until ready for use. If stored as set out above, PERMATEC 3000 CT has a minimum shelf life of one year.