Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features
- Conductive
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Uses
- Automotive applications
- Industrial parts
- PCB board storage rack
- IC trays & tweezers
- Processing Method
Injection Molding
Properties
- Flame Rating
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Tensile Strength | 25 | MPa | ASTM D638 |
| Tensile Elongation Break | 1.4 | % | ASTM D638 |
| Flexural Modulus | 2324 | MPa | ASTM D790 |
| Flexural Strength | 40 | MPa | ASTM D790 |
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.04 | g/cm3 | ASTM D792 |
| Melt Flow Rate (220°C/10 kg) | 3 | g/ 10 min | ASTM D1238 |
| Molding Shrinkage (3.2 mm) | 0.40 - 0.60 | % | ASTM D955 |
| Notched Izod Impact (23°C) | 70 | J/m | ASTM D256 |
| Drying Temperature | 80 | °C | - |
| Drying Time | 2 - 4 | hr | - |
| Rear Temperature | 200 - 210 | °C | - |
| Middle Temperature | 210 - 220 | °C | - |
| Front Temperature | 220 - 230 | °C | - |
| Nozzle Temperature | 230 - 240 | °C | - |
| Processing (Met) Temp | 200 - 250 | °C | - |
| Mold Temperature | 60 | °C | - |
| Value | Units | Test Method / Conditions | |
| Deflection Temperature Under Load (1.82 MPa, Unannealed, 4.0 mm) | 77 | °C | ASTM D648 |
| Value | Units | Test Method / Conditions | |
| Surface Resistivity | 10^3 - 10^5 | ohms | ASTM D257 |
| Value | Units | Test Method / Conditions | |
| Flame Rating (1.6 mm) | HB | - | UL94 |
Regulatory & Compliance
- Certifications & Compliance