Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Features
- Good impact resistance
- Good dimensional stability
- High heat resistance
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Uses
- Automotive exterior / interior parts
- Automotive applications
- Processing Method
Injection Molding
Properties
- Flame Rating
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Tensile Modulus | 2850 | MPa | ASTM D638 |
| Tensile Strength | 59 | MPa | ASTM D638 |
| Tensile Elongation Break | 115 | % | ASTM D638 |
| Flexural Modulus | 2390 | MPa | ASTM D790 |
| Flexural Strength | 92 | MPa | ASTM D790 |
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.21 | g/cm3 | ASTM D792 |
| Rockwell Hardness | 119 | Scale R | ASTM D785 |
| Melt Flow Rate (260°C/2.16 kg) | 15 | g/ 10 min | ASTM D1238 |
| Molding Shrinkage (3.2 mm) | 0.60 - 0.90 | % | ASTM D955 |
| Water Absorption - 24hr | 0.15 | % | ASTM D570 |
| Notched Izod Impact (23°C) | 715 | J/m | ASTM D256 |
| Drying Temperature | 100 - 110 | °C | - |
| Drying Time | 4 - 6 | hr | - |
| Rear Temperature | 230 - 240 | °C | - |
| Middle Temperature | 235 - 245 | °C | - |
| Front Temperature | 240 - 250 | °C | - |
| Nozzle Temperature | 250 - 260 | °C | - |
| Mold Temperature | 50 - 90 | °C | - |
| Value | Units | Test Method / Conditions | |
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 4.0 mm) | 104 | °C | ASTM D648 |
| Value | Units | Test Method / Conditions | |
| Flame Rating (1.6 mm) | HB | - | UL94 |
Regulatory & Compliance
- Certifications & Compliance