Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features And Benefits
Quick Dry time, fast recoat.,,/p>
- Product Category
Industrial Maintenance,/p>
- Tint And Base Information
Not Tinted, Gray,/p>
Applications & Uses
- Applications
- Application Area
- General Surface Preparation
The surface to be coated must be dry, clean and free of oil,, grease, release agents and foreign material. SSPC 2 hand, cleaning or better is required. For use on metal surfaces.,,/p>
- Limitations Of Use
Apply only when ambient and surface temperatures are above, 5 degrees Celsius. For professional use only. Immediately after, use, place rags, steel wool and waste soaked with the product, in a water filled metal container.,,/p>
- Mixing & Application Information
Mix thoroughly before and during use. Air or airless spray, application is recommended. (Airless: 1500 psi with 0.01"-, 0.013" tip) (Brush: Natural Bristle Brush) (Roller: 9-10mm nap,, solvent resistant core) Thinning is not required for most, applications. If desired, a small amount of 85-0303 solvent can, be used if desired and permitted by local VOC regulations.,,/p>
- Coverage
Approx. 530 sqft / gal at 1 mil DFT
- Recommended Use
Use for short term protection on fabricated metal and shop, work that needs protection in the outdoors.,,/p>
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Gloss | Flat | - | - |
| VOC | 669.0 | g/l | - |
| DFT ( recommended) | 1 - 2 | mil | - |
| Weight-Volume | approx. 1.3 | kg/ litre | - |
| Solids By Volume | approx. 35 | % | - |
| Solids By Weight | approx. 57 | % | - |
| Drying Time (25°C, Dust free) | 15.0 | minutes | - |
| Clean up | Clean with thinners | - | - |
| Drying Time (25°C,To Touch ) | 2.0 | hours | - |
| Drying Time (25°C, Recoat) | 2.0 | hours | - |
Safety & Health
- Safety
Proper safety procedures should be followed at all times while, handling this product. In confined areas, personal protection, equipment and explosion proof application equipment should, be used. Keep containers away from heat, flame or sparks, when not in use. Use with adequate ventilation. Keep from the, reach of children. Read all label directions and Safety Data, Sheet for health and safety information prior to use.,,/p>
Packaging & Availability
- Packaging
18.9 L Pail,/p>