Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Key Features
3D36 cures rapidly to give high strength to parts with excellent surface, good electrical insulation and dimensional stability.
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Product Applications
Used in electrical hardware applications such as underwater connectors and other insulation applications.
Properties
- Flame Rating
- Flame Rating
- UL 94 V1
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Moisture Properties
- Processing Information (Molding)
Value | Units | Test Method / Conditions | |
Flexural Strength | 12 - 14,000 | psi | - |
Compressive Strength | 18 - 22,000 | psi | - |
Tensile Strength | 3,500 - 7,000 | psi | - |
Impact Strength (Izod Notched) | 3.0 - 6.0 | ft-lb / inch | - |
Value | Units | Test Method / Conditions | |
Dimensional Stability | max. 0.04 | % | - |
Heat Distortion Temperature (at 18.6 kg/cm²) | 205 | °C | - |
Value | Units | Test Method / Conditions | |
Arc Resistance | 140 | seconds | - |
Dielectric Strength (Kv Step-by-Step, Dry) | 400 | volts/mil | - |
Dielectric Strength (Kv Step-by-Step, Wet) | 350 | volts/mil | - |
Dielectric Breakdown (Step-by-Step, Dry) | 55 | Kv | - |
Dielectric Breakdown (Step-by-Step, Wet) | 40 | Kv | - |
Dielectric Constant (at 1 KHz, Dry) | 5.5 | - | - |
Dielectric Constant (at 1 MHz, Dry) | 5.6 | - | - |
Dielectric Constant (at 1 KHz, Wet) | 6 | - | - |
Dissipation Factor (at 1KHz, Dry) | 0.04 | - | - |
Dissipation Factor (at 1KHz, Wet) | 0.05 | - | - |
Dielectric Constant (at 1MHz, Wet) | 5.5 | - | - |
Dissipation Factor (at 1MHz, Dry) | 0.025 | - | - |
Dissipation Factor (at 1MHz, Wet) | 0.03 | - | - |
Value | Units | Test Method / Conditions | |
Water Absorption (at 50 °C,48 hours) | 0.25 | % | - |
Value | Units | Test Method / Conditions | |
Specific Gravity | 1.95 | - | - |
Bulk Factor | 6.0 - 12.0 | - | - |
Molding Pressure | 500 - 8,000 | psi | - |
Molding Temperature | 130 - 170 | °C | - |
Mold Shrinkage | 0.001 - 0.004 | In / In | - |
Regulatory & Compliance