Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Key Features
3D94 is available in green color and has a flow range of 17 to 35 inches.
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Product Applications
Used in inductors, capacitors, resistors and resistor networks.
Properties
- Color
- Physical Form
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Moisture Properties
- Processing Information (Molding)
| Value | Units | Test Method / Conditions | |
| Flexural Strength | 8 - 14,000 | psi | - |
| Compressive Strength | 18 - 22,000 | psi | - |
| Tensile Strength | 3,500 - 7,000 | psi | - |
| Impact Strength (Izod Notched) | 0.30 - 0.50 | ft-lb / inch | - |
| Value | Units | Test Method / Conditions | |
| Dimensional Stability | max. 0.04 | % | - |
| Heat Distortion Temperature (at 18.6 kg/cm²) | 205 | °C | - |
| Value | Units | Test Method / Conditions | |
| Arc Resistance | 140 | seconds | - |
| Dielectric Strength (Kv Step-by-Step, Dry) | 400 | volts/mil | - |
| Dielectric Strength (Kv Step-by-Step, Wet) | 350 | volts/mil | - |
| Dielectric Breakdown (Step-by-Step, Dry) | 55 | Kv | - |
| Dielectric Breakdown (Step-by-Step, Wet) | 40 | Kv | - |
| Dielectric Constant (at 1 KHz, Dry) | 5.5 | - | - |
| Dielectric Constant (at 1 KHz, Wet) | 6 | - | - |
| Dissipation Factor (at 1KHz, Dry) | 0.04 | - | - |
| Dissipation Factor (at 1KHz, Wet) | 0.05 | - | - |
| Dielectric Constant (at 1 MHz, Dry) | 5.6 | - | - |
| Dielectric Constant (at 1 MHz, Wet) | 5.5 | - | - |
| Dissipation Factor (at 1MHz, Dry) | 0.025 | - | - |
| Dissipation Factor (at 1MHz, Wet) | 0.03 | - | - |
| Value | Units | Test Method / Conditions | |
| Water Absorption (at 50 °C,48 hours) | 0.4 | % | - |
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.89 | - | - |
| Molding Pressure | 250 - 8,000 | psi | - |
| Molding Temperature | 130 - 170 | °C | - |
| Mold Shrinkage | 0.001 - 0.008 | In / In | - |
Regulatory & Compliance
- Certifications & Compliance