Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Product Applications
It is designed for the encapsulation of coils, transformers, bushings, and other electrical and electronic components requiring high thermal shock resistance.
Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Processing Information (Molding)
| Value | Units | Test Method / Conditions | |
| Flexural Strength | 19000.0 | psi | - |
| Flexural Strength | 1388.0 | kg/cm² | - |
| Compressive Strength | 32000.0 | psi | - |
| Compressive Strength | 2250.0 | kg/cm² | - |
| Tensile Strength | 12000.0 | psi | - |
| Tensile Strength | 850.0 | kg/cm² | - |
| Hardness (Shore D) | 95.0 | - | - |
| Impact Strength (Izod Notched) | 0.028 | kg-m/cm | - |
| Impact Strength (Izod Notched) | 0.52 | ft-Ib/inch | - |
| Value | Units | Test Method / Conditions | |
| Thermal Conductivity | 30 x 10⁻⁴ | cal/cm-sec-°C | - |
| Heat Distortion Temperature (at 18.6 kg/cm²) | 110.0 | °C | - |
| Heat Distortion Temperature (at 264 psi) | 230.0 | °F | - |
| Maximum Intermittent Operating Temperature | 200.0 | °C | - |
| Hot Plate Cure Time (at 150 °C) | 38.0 | seconds | - |
| Value | Units | Test Method / Conditions | |
| Arc Resistance | 180.0 | seconds | - |
| Dissipation Factor (1 KHz) | 0.005 | - | ASTM 150 |
| Dielectric Constant (1 KHz) | 3.6 | - | - |
| Dielectric Strength (Short Time, 125 mils) | 350.0 | volts/mil | - |
| Loss Factor (1 KHz) | 0.018 | - | ASTM 150 |
| Volume Resistivity | 6.0x 10¹⁵ | Ohm - cm | - |
| Surface Resistivity | 1x 10¹⁶ | ohm-cm | - |
| Value | Units | Test Method / Conditions | |
| Bulk Density | 1.0 | gm/cc | - |
| Molding Pressure | 3.5 - 70 | kg/cm² | - |
| Molding Pressure | 50 - 1,000 | psi | - |
| Molding Temperature | 150 - 180 | °C | - |
| Molding Temperature | 302 - 356 | °F | - |
| Mold Shrinkage | 0.006 | cm/cm | - |
| Cure Time (at 150°C) | 1 - 3 | minutes | - |
| Molded Density | 1.95 | gm/cc | - |
| Spiral Flow | 94.0 | cm | EMMI 1-66A |
Regulatory & Compliance
Storage & Handling
- Shelf Life
- 12 months
- Storage and Shelf life Conditions
Storage Specification Data Recommended Storage Temperature °C 4 Storage Life (Not more than 40% loss of spiral flow based on original values.) 5 °C , months 12