Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Product Applications
This compound was especially formulated to achieve a high glass transition temperature for optimum reliability performance in very thin sections. It is designed to encapsulate a wide range of devices including capacitors, resistors, resistor networks and inductor coils.
Properties
- Flame Rating
- Flame Rating
- UL 94 V0
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Processing Information (Molding)
Value | Units | Test Method / Conditions | |
Tensile Strength | 8200 | psi | - |
Tensile Strength | 580 | kg/cm² | - |
Flexural Strength | 12400 | psi | - |
Flexural Strength | 873 | kg/cm² | - |
Compressive Strength | 34200 | psi | - |
Compressive Strength | 2400 | kg/cm² | - |
Value | Units | Test Method / Conditions | |
Glass Transition Temperature (Tg) | 163 | °C | - |
Linear Thermal Expansion (Alpha 1) | 27x 10⁻⁶ | cm/cm/°C | - |
Linear Thermal Expansion (Alpha 2) | 60x 10⁻⁶ | cm/cm/°C | - |
Thermal Conductivity | 23x10⁻⁴ | cal/cm-sec-°C | - |
Value | Units | Test Method / Conditions | |
Arc Resistance | 194 | seconds | - |
Dissipation Factor (1 KHz) | 0.012 | - | ASTM 150 |
Dielectric Constant (1 KHz) | 5.12 | - | - |
Dielectric Strength (1/4 Inch Section) | 387 | volts/mil | - |
Surface Resistivity | min. 1.5x 10¹⁶ | ohm-cm | - |
Volume Resistivity | 2.2x 10¹⁵ | Ohm - cm | - |
Value | Units | Test Method / Conditions | |
Bulk Density | 0.9 | gm/cc | - |
Molding Pressure | 14 - 70 | kg/cm² | - |
Molding Pressure | 200 - 1,000 | psi | - |
Molding Temperature | 145 - 180 | °C | - |
Molding Temperature | 293 - 356 | °F | - |
Mold Shrinkage | 0.004 | cm/cm | - |
Cure Time (at 150°C) | 1 - 2 | minutes | - |
Post Cure (at 150°C) | 4 | hours | - |
Molded Density | 2.08 | gm/cc | - |
Spiral Flow | 76 | cm | EMMI 1-66A |
Regulatory & Compliance
Storage & Handling
- Shelf Life
- 6 months
- Storage and Shelf life Conditions
Storage Specification Data Recommended Storage Temperature °C 4 Storage Life (Not more than 40% loss of spiral flow based on original values.) 5 °C , months 6