Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Product Applications
It is designed to encapsulate coils, transformers, switches and other electrical components requiring good hot rigidity in molding.
Properties
- Flame Rating
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Moisture Properties
- Processing Information (Molding)
Value | Units | Test Method / Conditions | |
Flexural Strength | 16500.0 | psi | - |
Flexural Strength | 1160.0 | kg/cm² | - |
Compressive Strength | 41000.0 | psi | - |
Compressive Strength | 2500.0 | kg/cm² | - |
Tensile Strength | 9500.0 | psi | - |
Tensile Strength | 670.0 | kg/cm² | - |
Impact Strength (Izod Notched) | 0.017 | kg-m/cm | - |
Impact Strength (Izod Notched) | 0.3 | ft-Ib/inch | - |
Hardness (Shore D) | 75.0 | - | - |
Value | Units | Test Method / Conditions | |
Glass Transition Temperature (Tg) | 150.0 | °C | - |
Linear Thermal Expansion (Alpha 1) | 27x 10⁻⁶ | cm/cm/°C | - |
Linear Thermal Expansion (Alpha 2) | 79x 10⁻⁶ | cm/cm/°C | - |
Thermal Conductivity | 16 x 10⁻⁴ | cal/cm-sec-°C | - |
Value | Units | Test Method / Conditions | |
Arc Resistance | 180.0 | seconds | - |
Dissipation Factor (1 KHz) | 0.007 | - | ASTM 150 |
Dielectric Constant (1 KHz) | 4.5 | - | - |
Dielectric Strength (1/8 Inch Section) | min. 400 | volts/mil | - |
Loss Factor (1 KHz) | 0.032 | - | ASTM 150 |
Volume Resistivity | min. 5.0x 10¹⁵ | Ohm - cm | - |
Surface Resistivity | min. 1.0x 10¹⁶ | ohm-cm | - |
Value | Units | Test Method / Conditions | |
Water Absorption (at 23 °C, 24 hours) | 0.04 | % | - |
Value | Units | Test Method / Conditions | |
Bulk Density | 1.0 | gm/cc | - |
Molding Pressure | 3.5 - 70 | kg/cm² | - |
Molding Pressure | 50 - 1,000 | psi | - |
Molding Temperature | 150 - 180 | °C | - |
Molding Temperature | 302 - 356 | °F | - |
Mold Shrinkage | 0.006 | cm/cm | - |
Color Stability (at 150 °C) | Excellent | 1000 hours | - |
Post Cure (at 150°C) | 30.0 | hours | - |
Molded Density | 1.88 | gm/cc | - |
Spiral Flow | 66.0 | cm | EMMI 1-66A |
Regulatory & Compliance
Storage & Handling
- Shelf Life
- 6 months
- Storage and Shelf life Conditions
Storage Specification Data Recommended Storage Temperature °C 4 Storage Life (Not more than 40% loss of spiral flow based on original values.) 5 °C , months 6