Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
Crafco Company Logo

Roadsaver 515

1 of 13 products in this brand
Crafco RoadSaver 515 sealant is a hot-applied asphalt-based product used to seal and fill cracks and joints in asphalt and Portland cement concrete pavements in moderate to cold climates. RoadSaver 515 is supplied in solid form which when melted and properly applied forms a highly adhesive and flexible compound that resists cracking in the winter and resists flow in the summer. RoadSaver 515 is used in highway, street, and airfield pavements and is applied to pavement cracks and joints using either pressure feed Melter applicators or pour pots. At application temperature, RoadSaver 515 is a free flowing, self-leveling product. The unique formulation of RoadSaver 515 reduces stress buildup during extension at low temperatures which improves long term performance. RoadSaver 515 has been a top performing quality Crafco product for over 25 years.

Product Type: Hot Melt Sealant

Compatible Substrates & Surfaces: Asphalt, Concrete

Technical Data SheetSafety Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Product Type

Hot Melt Sealant

Technologies

Ready-to-Use Products

Product Families

Ready-to-Use Products — Adhesives & Sealants

Caulks & Sealants

Features & Benefits

Labeling Claims

VOC-free

Ready-to-Use Product Features

Crack Resistant,

Flexible,

Free Flowing,

Good Adhesion,

High Performance,

Self-Leveling

Applications & Uses

Markets

Building & Construction

Applications

Building & Construction — Infrastructure, Roads & Paving

Pavement, Highways, Roads & Bridges

Compatible Substrates & Surfaces

Asphalt,

Concrete

Installation

The unit weight of Crafco RoadSaver 515 is 10.5 lbs. per gallon (1.26 kg/L) at 60°F (15.5°C). Prior to use, the user must read and follow Installation Instructions for Hot-Applied RoadSaver, PolyFlex, Parking Lot and Asphalt Rubber Products to verify proper product selection, heating methods, pavement preparation procedures, application geometry, usage precautions and safety procedures. These instructions are provided with each pallet of product.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Bond (0°F, 0.5” (12.7 mm) Thickness, 100% Ext.)Pass 5 Cycles--
Cone Penetration (77°F)50 - 90--
Ductility (77°F)min. 30cm-
Flow (140°F)max. 0.5cm-
Maximum Heating Temperature400.0°F-
Minimum Application Temperature380.0°F-
Resilience25 - 60%-
Softening Pointmin. 176°F-
Specification Conformance

RoadSaver 515 meets state modified AASHTO M173 specifications and exceeds requirements of ASTM D6690 (AASHTO M324), Type I (formerly ASTM D1190, AASHTO M173), and Federal Specification SS-S-164.

Packaging & Availability

Packaging Type

Boxes

Packaging

Product is supplied in either cardboard boxes, or in meltable boxless packaging. Both package types are labeled in accordance with OSHA, GHS, and specification requirements; are sold by net weight; are interlock stacked on 48 x 40 in. (122 x 102 cm) 4-way pallets; can be stored outside; and are covered with a weather resistant pallet cover and 2 layers of UV protected stretch wrap.

  • BOX packaging consists of cardboard boxes containing 30 lbs. (13.6 kg) of product with 75 boxes per pallet, weighing approximately 2250 lbs. (1020 kg). Boxes contain a quick melting release film for easy removal and are taped closed, without any staples.
  • Meltable packaging consists of approximately 30 lbs. (13.6 kg) completely meltable packages that are interlock stacked on pallets. To use, the pallet wrap is removed, and individual blocks are placed in the Melter. There are no individual cardboard boxes to open, empty, handle, or dispose of. Meltable packaging quickly melts into the product without affecting specification conformance. Meltable packaged sealant products are sold by the pallet only and individual packages are not indented for sale.