Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Area
- Application Method
- Cure Method
- Application Method
- Screen-print
Properties
- Typical Properties
- Typical Cured Properties
Value | Units | Test Method / Conditions | |
Conductivity | 0.05 | - | - |
Ag/AgCl Ratio | 82:18 | - | - |
Value | Units | Test Method / Conditions | |
Viscosity | 12,000 - 16,000 | cps | - |
Filler | Silver/Silver Chloride | - | - |
Volume Resistivity | 0.0002 | ohm-cm | - |
Sheet Resistivity | 0.05 | ohm/sq. | - |
Hydrolytic Stability | Excellent | - | - |
Useful Temperature Range | -55 to 200 | ºC | - |
Thermal Stability | Good to 325 | °C | - |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 6 months at 25°C.
- Suggested Handling & Curing
113-09 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of CMI Thinner # 102-03 and/or butyl cellosolve acetate. Prior to using, be certain to resuspend silver. Best properties, for most applications, result when cured for several minutes at 100°C. Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 50°C to 150°C. End user is advised to experimentally determine temperature and time best suited for individual applications.