Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Highlights
MINEX® ST functional fillers are produced from nepheline syenite; a naturally occurring, silica deficient, sodium- potassium alumina silicate. Automated scanning electron microscopy confirms they contain less than one-tenth of one percent crystalline silica. No free crystalline silica is detectable in the mineral complex. All MINEX® ST grades are processed
and sized with rigid adherence to Covia’s QIPSM quality assurance programs. Consistently uniform chemistries, size distributions, and top size controls ensure reliable performance.
Applications & Uses
- Applications
- Product Applications
MINEX® ST grades are easily dispersed in a wide range of advanced resin systems from industrial primers and topcoats to aerospace, automotive, marine, plus the next generation paint/primer interior and exterior architectural systems for ultimate performance.
Properties
- Typical Properties
- Chemical Analysis
| Value | Units | Test Method / Conditions | |
| Particle Size (Passing through 75 Mesh) | 100.0 | - | SediGraph |
| Particle Size (Passing through 45 Mesh) | 99.8 | - | SediGraph |
| Particle Size (Passing through 20 Mesh) | 91.6 | - | SediGraph |
| Particle Size (Passing through 16 Mesh) | 85.2 | - | SediGraph |
| Particle Size (Passing through 10 Mesh) | 62.5 | - | SediGraph |
| Particle Size (Passing through 5 Mesh) | 34.5 | - | SediGraph |
| Median Particle Size | 7.6 | - | SediGraph |
| Hegman Value | 4.6 | - | ASTM D1210-79 |
| Specific Surface Area | 2.2 | m²/g | - |
| Brightness | 88.3 | - | TAPPI |
| Moisture Content | 0.1 | % | ASTM C-566 |
| Oil Absorption | 30.0 | - | ASTM D-281 |
| pH | 10.2 | - | AFS 113-87-S |
| Density | 21.7 | lbs/gallon | ASTM D-153 |
| Bulking Value | 0.0459 | - | ASTM C-29 |
| Refractive Index | 1.51 - 1.53 | - | ASTM D-801 |
| Specific Resistance | 3000.0 | ohm-cm | ASTM D-2448 |
| Hardness | 6.0 | Mohs | - |
| Value | Units | Test Method / Conditions | |
| Silicon Dioxide | 10.4 | % | - |
| Aluminum Oxide | 4.85 | % | - |
| Sodium Oxide | 23.6 | % | - |
| Potassium Oxide | 60.2 | % | - |
| Calcium Oxide | 0.39 | % | - |
| Iron Oxide | 0.08 | % | - |
| Magnesium Oxide | 0.02 | % | - |
| Loss on lgnition | 0.5 | % | - |
Packaging & Availability
- Regional Availability
- Product Availability
1,000 and 2,000 IBC Truck and Rail